Wear mechanisms and micro-evaluation of WC + TiC particle-reinforced Ni-based composite coatings fabricated by laser cladding
Source abstract
Abstract
To enhance the quality and wear-resistance of metal-based composite coatings, Ni62 composite coatings were prepared by laser cladding 65Mn surfaces with WC and TiC as reinforcing phase particles. The effects of the laser power and content of the reinforcing phase on the microstructure, element distribution, phase composition, microhardness, friction, and wear properties of the composite coatings were investigated. Focus was placed on the cracking and wear mechanisms of the coating. The metallurgical binding zone exhibited a serrated morphology. The growth patterns of the crystals of the cladding layer resulted in the formation of columnar, cytosolic, and dendrite (or equiaxed) crystals. The main physical phases of the composite coating were the solid-solution (Ni, Cr, Fe), CW 3, and Ti composite phases. There were two primary cracks in the cladding layer, one penetrating from the coating to the substrate, and the other occurring mainly at the interface between the cladding layer and the substrate. CeO 2 incorporation led to refinement of the cladding layer and a significant reduction in the surface and cross-sectional defects. Wear of the coating was mainly caused by the alternating effects of adhesive, delamination, and abrasive wear.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. A study on the corrosion resistance of hydrophobic coatings on 65Mn steel10.3390/coatings11111399 ↗
2. Research on interface structure and performance of diamond brazed coating based on non-vacuum environment10.1007/s40194-022-01259-8 ↗
3. Microstructure and properties of modified layer on the 65Mn steel surface by pulse detonation-plasma technology10.1007/s11665-021-06258-2 ↗
4. Study on the friction performance of cerium oxide on supersonic flame-sprayed WC-10Co-4Cr coating10.3390/coatings11010024 ↗
5. Wear behavior of laser cladded WC-reinforced Ni-based coatings under low temperature10.1016/j.triboint.2022.107939 ↗
6. Supramolecular reorientation during deposition onto metal surfaces of quasi-two-dimensional Langmuir monolayers composed of bifunctional amphiphilic, twisted Perylenes10.1021/acs.langmuir.1c01525 ↗
7. Microstructure and corrosion behaviour of WC/NiCrBSi coatings by vacuum cladding10.1080/02670836.2021.2021500 ↗
8. Effects of Ni addition on corrosion behaviors of laser cladded FeSiBNi coating in 3.5% NaCl solution10.1016/j.jallcom.2019.05.012 ↗
9. NiCrSiBC coatings: effect of dilution on microstructure and high temperature tribological behavior10.1016/j.wear.2016.01.015 ↗
10. Microstructure and wear resistance of Ni-based tungsten carbide coating by laser cladding on tunnel boring machine cutter ring10.1016/j.surfcoat.2020.126432 ↗
11. Effect of NiCrBSi content on microstructural evolution, cracking susceptibility and wear behaviors of laser cladding WC/Ni–NiCrBSi composite coatings10.1016/j.jallcom.2014.11.161 ↗
12. Study of the sliding Wear and friction behavior of WC + NiCrBSi laser cladding coatings as a function of actual concentration of WC reinforcement particles in ball-on-disk test10.1007/s11249-016-0734-3 ↗
13. Effect of Ti addition on microstructure and tribological properties of laser cladding Ni35/WC coating in an oxygen-free environment10.1016/j.surfcoat.2022.128480 ↗
14. Evaluation of the mechanical properties of WC-Ni composite coating on an AISI 321 steel substrate10.1016/j.optlastec.2020.106138 ↗
15. Investigation on cored-eutectic structure in Ni60/WC composite coatings fabricated by wide-band laser cladding10.1016/j.jallcom.2015.04.136 ↗
16. Microstructure and properties of Ni-WC gradient composite coating prepared by laser cladding10.1016/j.ceramint.2021.11.338 ↗
17. Balanced strength-ductility combination and good recoverable strain of Ni50.7Ti49.3 alloy fabricated by high scanning velocity in selective laser melting10.1016/j.matchar.2022.112490 ↗
18. Effect of WC content on microstructures and mechanical properties of FeCoCrNi high-entropy alloy/WC composite coatings by plasma cladding10.1016/j.surfcoat.2019.125326 ↗
19. WC particles distribution model in the cross-section of laser cladded NiCrBSi + WC coatings, for different wt% WC10.1016/j.surfcoat.2017.05.086 ↗
20. Effect of actual WC content on the reciprocating wear of a laser cladding NiCrBSi alloy reinforced with WC10.1016/j.wear.2014.12.021 ↗
21. Wear mechanisms and micro-evaluation on WC particles investigation of WC-Fe composite coatings fabricated by laser cladding10.1016/j.surfcoat.2021.127341 ↗
22. Investigation on WC/TiC interface relationship in wear-resistant coating by first-principles10.1016/j.surfcoat.2016.08.025 ↗
23. Effects of WC addition on the morphology, microstructure and mechanical properties of Fe50/TiC/WC laser claddings on AISI 1045 steel10.1016/j.surfcoat.2021.127781 ↗
24. Analysis of crack behavior for Ni-based WC composite coatings by laser cladding and crack-free realization10.1016/j.apsusc.2008.04.003 ↗
25. Influence of CeO2 addition on forming quality and microstructure of TiC -reinforced CrTi4-based laser cladding composite coating10.1016/j.matchar.2020.110732 ↗
26. Effect of CeO 2 on crack sensitivity and tribological properties of Ni60A coatings prepared by laser cladding10.1177/16878140211013125 ↗
27. Effect of laser power on microstructure and interfacial bonding strength of laser cladding 17-4PH stainless steel coatings10.1016/j.matchemphys.2021.125236 ↗
28. Improvement of the mechanical and the tribological properties of CrNbTiMoZr coatings through the incorporation of carbon and the adjustment of the substrate bias voltage10.1016/j.surfcoat.2021.127064 ↗
29. Microstructure and wear resistance of AlCoCrFeNi-WC/TiC composite coating by laser cladding10.1016/j.matchar.2022.112479 ↗
30. Effect of argon shroud protection on the laser cladding of nanostructured WC-12Co powder10.1007/s11665-021-05675-7 ↗
31. Design and characterization of self-lubricating refractory high entropy alloy-based multilayered films10.1021/acsami.1c16949 ↗
32. Design and characterization of metallic glass/graphene multilayer with excellent nanowear properties10.1007/s40544-021-0581-6 ↗
33. Effects of structure relaxation and surface oxidation on nanoscopic wear behaviors of metallic glass10.1016/j.actamat.2022.117934 ↗