Correlating laser energy with compositional and atomic-level information of oxides in atom probe tomography
Source abstract
Abstract
Atom probe tomography (APT) is a 3D analysis technique that offers unique chemical accuracy and sensitivity with sub-nanometer spatial resolution. There is an increasing interest in the application of APT to complex oxides materials, giving new insight into the relation between local variations in chemical composition and emergent physical properties. However, in contrast to the field of metallurgy, where APT is routinely applied to study materials at the atomic level, complex oxides and their specific field evaporation mechanisms are much less explored. Here, we perform APT measurements on the hexagonal manganite ErMnO3 and systematically study the effect of different experimental parameters on the measured composition and structure. We demonstrate that both the mass resolving power (MRP) and compositional accuracy can be improved by increasing the charge-state ratio (CSR) working at low laser energy (< 5 pJ) for a given fixed detection rate. Furthermore, we observe a substantial preferential retention of Er atoms, which is suppressed at higher CSRs. We explain our findings based on fundamental field evaporation concepts, expanding the knowledge about the impact of key experimental parameters and the field evaporation process in complex oxides in general.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Materials Characterization Techniques · Diamond and Carbon-based Materials Research · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Clustering in age-Hardenable aluminum alloys10.1002/adem.201800255 ↗
2. Atom probe tomography10.1038/s43586-021-00047-w ↗
3. Enabling near-atomic–scale analysis of frozen water10.1126/sciadv.abd6324 ↗
4. A. La Fontaine, A. Zavgorodniy, H. Liu, R. Zheng, M. Swain, J. Cairney, Atomic-scale compositional mapping reveals mg-rich amorphous calcium phosphate in human dental enamel, Sci. Adv. 2 (2016) e1601145, doi:10.1126/sciadv.1601145.10.1126/sciadv.1601145 ↗
5. Atom probe tomography: development and application to the geosciences10.1111/ggr.12313 ↗
6. Atomic-scale 3D imaging of individual dopant atoms in an oxide semiconductor10.1038/s41467-022-32189-0 ↗
7. K.A. Hunnestad, J. Schultheiß, A.C. Mathisen, C. Hatzoglou, A.T.J. Van Helvoort, D. Meier, Quantitative 3D mapping of chemical defects at charged grain boundaries in a ferroelectric oxide, arXiv 7491 (2022) 1-14, doi:10.48550/arxiv.2212.07924.
8. Investigation of the site occupation of atoms in pure and doped TiAl/Ti3Al intermetallic10.1016/j.ultramic.2007.02.011 ↗
9. Direct observation of local potassium variation and its correlation to electronic inhomogeneity in (Ba1-xKx)Fe2As2 pnictide10.1103/PhysRevLett.106.247002 ↗
10. Ordering and site occupancy of D03 ordered Fe3Al-5 at%Cr evaluated by means of atom probe tomography10.1016/j.ultramic.2010.12.009 ↗
11. Partitioning and site occupancy of ta and Mo in co-base γ/γ’ alloys studied by atom probe tomography10.1016/j.intermet.2014.01.020 ↗
12. Exploring biases in atom probe tomography compositional analysis of minerals10.1111/ggr.12395 ↗
13. Preferential evaporation in atom probe tomography: an analytical approach10.1017/S1431927620001749 ↗
14. Simulation of field-induced molecular dissociation in atom-probe tomography: identification of a neutral emission channel
15. Behavior of molecules and molecular ions near a field emitter10.1088/1367-2630/18/3/033031 ↗
16. Correlated ion analysis and the interpretation of atom probe mass spectra10.1016/j.ultramic.2010.11.021 ↗
17. Accuracy of pulsed laser atom probe tomography for compound semiconductor analysis
18. An atom probe tomography study of site preference and partitioning in a nickel-based superalloy10.1016/j.actamat.2016.11.053 ↗
19. A study of parameters affecting atom probe tomography specimen survivability10.1017/S1431927618015258 ↗
20. A quantitative model of preferential evaporation and retention for atom probe tomography, surface and Interface
21. Atom probe tomography evaporation behavior of C-axis GaN nanowires: crystallographic, stoichiometric, and detection efficiency aspects10.1063/1.4830023 ↗
22. Atom probe tomography of a cu-doped TiNiSn thermoelectric material: nanoscale structure and optimization of analysis conditions
23. Effect of crystallographic orientation on atom probe tomography geochemical data?10.1016/j.micron.2020.102910 ↗
24. Field evaporation mechanism of bulk oxides under ultra fast laser illumination10.1063/1.3610523 ↗
25. Practical issues for atom probe tomography analysis of III-nitride semiconductor materials10.1017/S1431927615000422 ↗
26. Quantitative atom probe analyses of rare-earth-doped ceria by femtosecond pulsed laser10.1016/j.ultramic.2010.12.011 ↗
27. Reflections on the spatial performance of atom probe tomography in the analysis of atomic neighborhoods
28. Evaporation-field differences with deep-UV atom probe tomography10.1017/S1431927621004736 ↗
29. Influence of field conditions on quantitative analysis of single crystal thorium dioxide by atom probe tomography10.1016/j.ultramic.2020.113167 ↗
30. Investigation of wustite (Fe1-xO) by femtosecond laser assisted atom probe tomography10.1016/j.ultramic.2010.11.023 ↗
31. Composition of wide bandgap semiconductor materials and nanostructures measured by atom probe tomography and its dependence on the surface electric field10.1021/jp5071264 ↗
32. Analysis of natural rutile (TiO2) by laser-assisted atom probe tomography10.1017/S1431927618015477 ↗
33. Determination of the tip temperature in laser assisted atom-probe tomography using charge state distributions10.1063/1.3006017 ↗
34. Quantifying compositional homogeneity in Pb(Zr, Ti)O3 using atom probe tomography10.1111/jace.13135 ↗
35. Thermal effects on mass and spatial resolution during laser pulse atom probe tomography of cerium oxide10.1016/j.jnucmat.2012.12.052 ↗
36. Role of photoexcitation and field ionization in the measurement of accurate oxide stoichiometry by laser-assisted atom probe tomography10.1021/jz400015h ↗
37. Effects of laser energy and wavelength on the analysis of LiFePO4 using laser assisted atom probe tomography10.1016/j.ultramic.2014.09.004 ↗
38. The mystery of missing species in atom probe tomography of composite materials10.1063/1.4928625 ↗
39. Field evaporation of ZnO: a first-principles study10.1063/1.4926489 ↗
40. The origin of ferroelectricity in magnetoelectric YMnO310.1038/nmat1080 ↗
41. Hexagonal rare-earth manganites and ferrites: a review of improper ferroelectricity, magnetoelectric coupling, and unusual domain walls10.1039/D0CP02195D ↗
42. Landau theory of topological defects in multiferroic hexagonal manganites10.1038/nmat3786 ↗
43. Anisotropic conductance at improper ferroelectric domain walls10.1038/nmat3249 ↗
44. Functional electronic inversion layers at ferroelectric domain walls10.1038/nmat4878 ↗
45. Interstitial oxygen as a source of p-type conductivity in hexagonal manganites10.1038/ncomms13745 ↗
46. Structural, dielectric, antiferromagnetic, and thermal properties of the frustrated hexagonal Ho1-xErxMnO3 manganites
47. Oxygen vacancies in the bulk and at neutral domain walls in hexagonal YMnO310.1103/PhysRevB.98.184102 ↗
48. Growth of high-quality hexagonal ErMnO3 single crystals by the pressurized floating-zone method10.1016/j.jcrysgro.2014.10.006 ↗
49. In situ site-specific specimen preparation for atom probe tomography10.1016/j.ultramic.2006.06.008 ↗
50. Using mass resolving power as a performance metric in the atom probe10.1017/S1431927616004256 ↗
51. Hatzoglou · 2023
52. Insulating interlocked ferroelectric and structural antiphase domain walls in multiferroic YMnO310.1038/nmat2632 ↗
53. Topological defects in hexagonal Manganites: inner structure and emergent electrostatics10.1021/acs.nanolett.7b01288 ↗
54. Direct observation of interlocked domain walls in hexagonal RMnO3 (R=tm, Lu)10.1103/PhysRevB.85.020102 ↗
55. Origins of the hydrogen signal in atom probe tomography: case studies of alkali and noble metals
56. The post-ionization of field evaporated ions: a theoretical explanation of multiple charge states10.1016/0039-6028(82)90434-4 ↗
57. Quantitative analysis of doped/undoped ZnO nanomaterials using laser assisted atom probe tomography: influence of the analysis parameters10.1063/1.4936167 ↗
58. Gault · 2012
59. Impact of directional walk on atom probe microanalysis10.1016/j.ultramic.2011.06.005 ↗
60. Spatial distribution maps for atom probe tomography10.1017/S1431927607070948 ↗
61. The spatial resolution of 3D atom probe in the investigation of single-phase materials10.1016/S0304-3991(00)00035-8 ↗
62. Field desorption, physical
63. Miller · 2009
64. Williams Lefebvre · 2016
65. Field evaporation theory: a review of basic ideas10.1016/0169-4332(94)00526-5 ↗
66. Measurement of activation energies for field evaporation of tungsten ions as a function of electric field10.1103/PhysRevB.29.4304 ↗
67. Modeling field evaporation degradation of metallic surfaces by first principles calculations: a case study for Al, Au, Ag, and Pd10.1088/1742-6596/1043/1/012039 ↗
68. Mapping energetics of atom probe evaporation events through first principles calculations10.1016/j.ultramic.2013.02.007 ↗
69. Surface diffusion of Fe and cu on Fe (001) under electric field using first-principles calculations10.1017/S1431927618015738 ↗