Recovery stress and strain behavior of Cr20Mn20Fe20Co35Ni5 high entropy alloy deformed via severe plastic deformation
Source abstract
Abstract
The shape memory properties of the Cr 20Mn 20Fe 20Co 35Ni 5 high-entropy alloy (HEA) prepared by using severe plastic deformation (via differential speed rolling) were evaluated after annealing at different temperatures by tensile testing and the effect of grain size on its recovery stress and strain behavior were examined. The obtained grain size after annealing ranged from 3.0 to 82.2 μm. As the grain size (annealing temperature) was increased, the recovery strain was increased because the amount of deformation-induced martensite formed during rolling, and the density of grain boundaries and annealing twin boundaries decreased. A maximum recovery strain of 1.2% was obtained from a sample with a large grain size of 82.2 μm, while a maximum recovery stress of 302 MPa was obtained from a sample with a small grain size of 7.1 μm. This result indicates that grain refinement can lead to enhanced recovery stress but reduces recovery strain. The optimum amount of prestrain for recovery stress and strain was 6%. Training effect due to repeated cycling was observed. The shape memory characteristics and behaviors of the present HEA are found to be similar to those of Fe-Mn-Si-based shape memory alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Recent Progress in high entropy alloys10.3166/acsm.31.633-648 ↗
2. Shape memory alloy actuator design: CASMART collaborative best practices and case studies10.1007/s10999-013-9227-9 ↗
3. Design and application of shape memory actuators10.1140/epjst/e2008-00679-9 ↗
4. A review of shape memory alloy research, applications and opportunities10.1016/j.matdes.2013.11.084 ↗
5. High entropy shape memory alloys10.1016/j.matpr.2015.07.335 ↗
6. Directions for high-temperature shape memory alloys’ improvement: straight way to high-entropy materials?10.1007/s40830-015-0039-7 ↗
7. A strategy of designing high-entropy alloys with high-temperature shape memory effect10.1038/s41598-019-49529-8 ↗
8. Effects of alloying additions on Fe-Mn-Si shape memory alloys10.2355/isijinternational.30.674 ↗
9. Achieving ultrafine grained Fe-Mn-Si shape memory alloys with enhanced shape memory recovery stresses10.1016/j.msea.2017.06.091 ↗
10. Austenite grain size effect on recovery stress and recovery strain of Fe-Mn-Si-Cr-Ni-0.01 C alloy severely plastically deformed by differential speed rolling10.1016/j.matchar.2021.111097 ↗
11. Remarkable improvement of recovery stress of Fe–Mn–Si shape memory alloy fabricated by equal channel angular pressing10.1016/j.msea.2006.10.101 ↗
12. Improvement of shape memory effect in an Fe–Mn–Si–Cr–Ni alloy fabricated by equal channel angular pressing10.1016/j.jmatprotec.2007.12.103 ↗
13. Relationship among grain size, annealing twins and shape memory effect in Fe–Mn–Si based shape memory alloys
14. Dependence of shape memory effect on austenitic grain sizes in thermo-mechanical treated Fe-Mn-Si-Cr-Ni shape memory alloys10.1016/j.matchar.2020.110650 ↗
15. Key factors achieving large recovery strains in polycrystalline Fe–Mn–Si-based shape memory alloys: a review10.1002/adem.201700741 ↗
16. Composition design principles for Fe–Mn–Si–Cr–Ni based alloys with better shape memory effect and higher recovery stress10.1016/j.msea.2005.08.054 ↗
17. Effect of stacking fault probability on γ–ε martensitic transformation and shape memory effect in Fe–Mn–Si based alloys10.1016/S1359-6454(97)00266-8 ↗
18. Formation of surface texture and anisotropy of shape memory effect in an Fe-Mn-Si alloy10.2355/isijinternational.36.1103 ↗
19. Y, Yeon, evaluation of Fe-based shape memory alloy (Fe-SMA) as strengthening material for reinforced concrete structures10.3390/app8050730 ↗
20. Stress recovery and cyclic behaviour of an Fe-Mn-Si shape memory alloy after multiple thermal activation10.1088/1361-665X/aaa2c9 ↗
21. Training effect in Fe-Mn-Si shape-memory alloys10.1007/BF00363341 ↗
22. The effect of thermomechanical training on the microstructures of Fe-Mn-Si shape memory alloy10.1051/jp4:1995881 ↗
23. Effects of thermo-mechanical training on a Fe59Mn30Si6Cr5 shape memory alloy10.1016/j.msea.2006.02.119 ↗
24. In-situ observation of partial dislocation motion during γ→ ε transformation in a Fe–Mn–Si shape memory alloy10.2320/matertrans1989.33.253 ↗
25. Influence of plastic deformation heterogeneity on development of geometrically necessary dislocation density in dual phase steel10.1016/j.msea.2016.05.022 ↗
26. Hardening due to pre-existing ϵ-Martensite in an Fe-30Mn-1Si alloy single crystal10.1016/0001-6160(82)90030-X ↗
27. Is it possible to use rolling methods to improve textures on Fe-Mn-Si shape memory alloys?10.1002/adem.201700062 ↗
28. Microscopic observation of γ-phase and ε-and α’-martensite in Fe Mn Si-based shape memory alloys10.1016/1044-5803(94)00054-O ↗
29. Effects of austenite grain size on ε martensitic transformation in Fe-15mass% Mn alloy10.2320/matertrans1989.34.489 ↗
30. Grain size effect on the recovery stress and strain of a Fe–Mn–Si shape memory alloy in a wide range of grain sizes
31. Formation of strain-induced martensite in chromium–nickel steels of the austenitic class10.1007/s11003-011-9404-7 ↗
32. Alloy design of FeMnSiCrNi shape-memory alloys related to stacking-fault energy10.1007/s11661-000-0001-x ↗
33. Stacking fault energy of face-centered-cubic high entropy alloys10.1016/j.intermet.2017.10.004 ↗
34. Effect of rolling conditions on the structure and shape memory properties of Fe–Mn–Si alloys10.1016/j.matchar.2010.03.005 ↗