Microstructural characteristics and mechanical behaviour of microwave-assisted sintered novel WC-Co ceramic based internally cooled turning tool
Source abstract
Abstract
The current paper presents a novel approach of rapid tooling technique involving 3D printed pattern and microwave sintering to develop the cutting insert with an inbuilt channel for the coolant flow. Microwave sintering causes rapid and uniform volumetric heating resulting in hardness and toughness equal to 1870±50 Hv and 12.5±1.5 MPa.m 1/2, respectively. SEM analysis shows less porosity and erosion in the sintered product. During machining, the friction due to chip sliding and rake face leads to heat generation and temperature rise in the tool resulting in adhesion and diffusion. This accelerates the tool`s wear and diminishes the tool`s life. Considering the thermal effect during machining, this channel will help to flow the coolant near the tooltip and enhance the cooling effect. Afterwards, the machining performance of the fabricated solid cutting inserts (i.e. without internal channels) and with internal channels have been compared in turning Ti6Al4V alloy. The internal cooling decreased the cutting force and temperature by 30% and 60%, respectively, compared to dry/machining with a solid tool. Besides this, the internal coolant channel has helped in reducing abrasion and crater tool wear. Internal cooling machining increases surface quality by reducing surface roughness by 42% as compared to dry cutting. While channel profile variation further improves the surface quality by 32%. The comparative EBSD study of machined surface reveals that internally cooled leads to minor grain evolution, thus maintaining the original characteristics of the workpiece.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Injection Molding Process and Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Modes of failure of cemented tungsten carbide tool bits (WC/Co): a study of wear parts10.1016/j.ijrmhm.2015.06.018 ↗
2. Sintering of the WC-6%Co cemented carbides for improved mechanical and cutting performance using micro-FAST
3. Spark plasma sintering and characterization of graphene platelet/ceramic composites10.1002/adem.201400326 ↗
4. Spark plasma sintering of graphene platelet reinforced zirconia composites with improved mechanical performance10.1016/j.msea.2017.01.107 ↗
5. Characterizations of ball-milled nanocrystalline WC–Co composite powders and subsequently rapid hot pressing sintered cermets10.1016/S0167-577X(03)00011-9 ↗
6. Sintering and mechanical behavior of SiC and WC co-added TiC-based composites densified by hot-pressing10.1016/j.ceramint.2020.10.231 ↗
7. Sintered nanocomposites ZrO2-WC obtained with field assisted hot pressing10.1016/j.compstruct.2020.113443 ↗
8. Experimental investigation for cutting performance of cemented carbide cutting insert developed through microwave sintering10.1016/j.ijrmhm.2022.105867 ↗
9. Fabrication of ceramic bioscaffolds from fly ash cenosphere by susceptor-assisted microwave sintering10.1016/j.jeurceramsoc.2022.03.046 ↗
10. Fabrication of full density near-nanostructured cemented carbides by combination of VC/Cr3C2 addition and consolidation by SPS and HIP technologies10.1016/j.ijrmhm.2010.10.007 ↗
11. Microstructure and mechanical properties and of pulse plasma compacted WC - Co10.1016/j.ijrmhm.2016.07.002 ↗
12. SPS hard metal alloy WC-8Ni-8Fe fabrication based on mechanochemical synthetic tungsten carbide powder10.1016/j.jallcom.2019.152547 ↗
13. Effects of microwave sintering temperature and soaking time on microstructure of WC-8Co10.1016/S1003-6326(13)62472-3 ↗
14. Microwave sintering study of strontium-doped lanthanum manganite in a single-mode microwave with electric and magnetic field at 2.45 GHz10.1016/j.jeurceramsoc.2022.05.060 ↗
15. Fabrication of W–Cu composites by microwave infiltration10.1016/j.jallcom.2009.12.011 ↗
16. Initial stage sintering of binderless tungsten carbide powder under microwave radiation10.1016/j.ceramint.2010.09.036 ↗
17. On finite element analysis of melting of metallic powders using microwave energy at 2.45 GHz
18. Microwave versus conventional sintering: a review of fundamentals, advantages and applications10.1016/j.jallcom.2010.01.068 ↗
19. Comparison between microwave and conventional sintering of WC/Co composites10.1016/j.msea.2004.08.085 ↗
20. Prospects of microwave processing: an overview10.1007/s12034-009-0001-4 ↗
21. Effect of microwave sintering on the microstructure and tribological behavior of Ti-3Al-2.5 V-xWC composite
22. Effect of microwave sintering on microstructure and mechanical properties in Y-TZP materials used for dental applications10.1016/j.ceramint.2015.02.025 ↗
23. Experimental studies on comparison of microwave curing and thermal curing of epoxy resins used for alternative mould materials10.1016/j.jmatprotec.2004.04.248 ↗
24. Experimental and theoretical investigation on microwave melting of metals10.1016/j.jmatprotec.2010.11.001 ↗
25. Microwave-material interaction phenomena: heating mechanisms, challenges and opportunities in material processing10.1016/j.compositesa.2015.10.035 ↗
26. Effect of microstructure of composite powders on microstructure and properties of microwave sintered alumina matrix ceramics10.1016/j.jmst.2013.03.024 ↗
27. Microwave sintered porous CoCrFeNiMo high entropy alloy as an efficient electrocatalyst for alkaline oxygen evolution reaction10.1016/j.jmst.2020.10.079 ↗
28. WC-Co particles reinforced aluminum matrix by conventional and microwave sintering
29. A thin dielectric ceramic coating with good absorbing properties composed by tungsten carbide and alumina10.1016/j.jallcom.2019.152851 ↗
30. A comparison study of sinterability and electrical properties for microwave and conventional sintered Mn0.43Ni0.9CuFe 0.67O4 ceramics10.1016/S1005-0302(10)60056-4 ↗
31. Microwave sintering of nanocrystalline WC-12Co: challenges and perspectives10.1016/j.ijrmhm.2009.08.005 ↗
32. Microwave sintering of hardmetals10.1016/S0263-4368(98)00050-X ↗
33. Microwave processing of WC-Co composities and ferroic titanates10.1007/s100190050017 ↗
34. Preparation of complex-shaped Al2O3/SiCp/SiCw ceramic tool by two-step microwave sintering10.1016/j.ceramint.2020.07.221 ↗
35. Composite and process for the production thereof
36. Process and apparatus for the preparation of particulate or solid parts
37. Enhancing the metallurgical properties of WC insert (K-20) cutting tool through microwave treatment10.1016/S0167-577X(01)00476-1 ↗
38. Performance enhancement through microwave irradiation of K20 carbide tool machining Al/SiC metal matrix composite10.1016/j.jmatprotec.2005.04.121 ↗
39. Performance assessment of microwave treated WC insert while turning AISI 1040 steel10.1007/s12206-018-0512-2 ↗
40. Some studies on high-pressure cooling in turning of Ti-6Al-4V10.1016/j.ijmachtools.2008.08.008 ↗
41. Titanium alloys and their machinability—a review10.1016/S0924-0136(96)00030-1 ↗
42. Wear behavior of PVD TiN coated carbide inserts during machining of Nimonic 90 and Ti6Al4V superalloys under dry and MQL conditions10.1016/j.ceramint.2016.06.124 ↗
43. Thermophysical investigations of mango seed oil as a novel cutting fluid: a sustainable approach toward waste to value addition
44. Experimental investigations into tribological and machining characteristics of Al2O3 and ZrO dispersed Jatropha oil-based nanofluids10.1007/s40430-022-03661-1 ↗
45. Development and characterization of unitary and hybrid Al2O3 and ZrO dispersed Jatropha oil-based nanofluid for cleaner production
46. Thermo-physical and tribological characteristics of ionic liquid-based rice bran oil as green cutting fluid
47. Solid lubricant-assisted minimum quantity lubrication and cooling strategies to improve Ti6Al4V machinability in finishing turning10.1016/j.triboint.2017.10.010 ↗
48. Experimental study on the effect of the cooling method on surface topography and workpiece integrity during trochoidal end milling of Incoloy 800
49. Tribological performance based machinability investigations in cryogenic cooling assisted turning of α-β titanium alloy10.1016/j.triboint.2021.107032 ↗
50. Sustainable techniques in grinding: state of the art review10.1016/j.jclepro.2020.121876 ↗
51. Tool performance and chip control when machining Ti6A14V and inconel 901 using high pressure coolant supply10.1080/10940349808945655 ↗
52. A comparative appraisal of sustainable strategy in ultrasonic assisted grinding of Nimonic 80A using novel green atomized cutting fluid
53. Experimental investigations into sustainable machining of Hastelloy C-276 under different lubricating strategies10.1016/j.jmapro.2022.01.003 ↗
54. The development and experimental research of a cryogenic internal cooling turning tool
55. Substitution of coolant by using a closed internally cooled milling tool10.1016/j.procir.2016.11.267 ↗
56. Machining with internally cooled toolholder using a phase change fluid10.1016/j.procir.2015.12.007 ↗
57. Toolholder internally cooled by a phase change fluid in turning of SAE XEV-F10.4028/www.scientific.net/AMM.798.486 ↗
58. Numerical modelling of residual stresses during orthogonal cutting of Ti6Al4V using internally cooled cutting inserts10.1016/j.jmapro.2021.03.042 ↗
59. Experimental studies and CFD simulation of the internal cooling conditions when drilling Inconel 71810.1016/j.ijmachtools.2016.06.003 ↗
60. Internal cryolubrication approach for Inconel 718 milling10.1016/j.promfg.2017.09.013 ↗
61. The experimental and theoretical evaluation of an indirect cooling system for machining10.1115/1.4002446 ↗
62. Performance of a pressurized internal-cooling slotted grinding wheel system10.1007/s00170-017-1014-6 ↗
63. Design and performance of an internal-cooling turning tool with micro-channel structures10.1016/j.jmapro.2019.08.011 ↗
64. Effects of internal cooling channel structures on cutting forces and tool life in side milling of H13 steel under cryogenic minimum quantity lubrication condition10.1007/s00170-015-7644-7 ↗
65. Turning of Inconel 718 using inserts with cooling channels under high pressure jet coolant assistance10.1016/j.jmatprotec.2017.03.032 ↗
66. Using internally cooled cutting tools in the machining of difficult-to-cut materials based on Waspaloy10.1177/1687814016647888 ↗
67. Process capability improvement using internally cooled cutting tool insert in cryogenic machining of super duplex stainless steel 250710.1007/978-981-15-2696-1_31 ↗
68. Metal fabrication by additive manufacturing using laser and electron beam melting technologies10.1016/S1005-0302(12)60016-4 ↗
69. Additive fabrication technologies applied to medicine and health care: a review10.1007/s00170-007-1308-1 ↗
70. Dimensional accuracy of internal cooling channel made by selective laser melting (SLM) and direct metal laser sintering (DMLS) processes in fabrication of internally cooled cutting tools
71. CFD simulation to optimize the internal coolant channels of an additively manufactured milling tool10.1016/j.procir.2021.09.040 ↗
72. Rapid manufacturing of copper components using 3D printing and ultrasonic assisted pressureless sintering: experimental investigations and process optimization10.1016/j.jmapro.2019.05.010 ↗
73. Process optimization for rapid manufacturing of complex geometry electrical discharge machining electrode10.1177/0954406219874845 ↗
74. Cutting tool insert and method of fabrication cutting tool insert
75. A research on WC–8Co preparation by microwave sintering10.1016/j.ijrmhm.2012.01.001 ↗
76. Mechanical properties and microstructural behaviour of microwave sintered WC–Co10.1007/s12540-019-00364-6 ↗
77. Effect of sintering atmosphere on microwave prepared WC–8wt.%Co cemented carbide10.1016/j.ijrmhm.2013.05.003 ↗
78. The effects of metallic additives on the microstructure and mechanical properties of WC-Co cermets prepared by microwave sintering10.1016/j.ceramint.2020.08.093 ↗
79. Correlation of transverse rupture strength of WC-Co with hardness10.1016/j.ijrmhm.2004.11.005 ↗
80. Machining induced surface integrity behavior of nickel-based superalloy: effect of lubricating environments10.1016/j.jmatprotec.2022.117701 ↗
81. Characterization and properties of sintered WC-Co and WC-Ni-Fe hard metal alloys10.1016/j.jallcom.2013.09.188 ↗
82. HV-KIC property charts of cemented carbides: a comprehensive data collection
83. The effect of cobalt on wear behavior of cemented carbide cutting tools for machining of titanium alloy10.1016/j.matpr.2017.11.443 ↗
84. Deformation induced surface hardening when turning metastable austenitic steel AISI 347 with different cryogenic cooling strategies10.1016/j.procir.2014.03.097 ↗
85. Design of an internally cooled turning tool based on topology optimization and CFD simulation10.1007/s00170-016-9804-9 ↗
86. CFD based study of fluid flow and heat transfer effect for novel turning tool configured with internal cooling channel10.1016/j.jmapro.2021.10.063 ↗
87. Performance analysis of coated carbide tool in turning of Nimonic 80A superalloy under different cutting environments10.1016/j.jmapro.2020.05.031 ↗
88. Childs · 2000
89. An overview of the machinability of aeroengine alloys10.1016/S0924-0136(02)01042-7 ↗
90. Performance and wear mechanisms of uncoated cemented carbide cutting tools in Ti6Al4V machining
91. Evolution of tool wear and its effect on cutting forces during dry machining of Ti-6Al-4V alloy10.1177/0954405413500243 ↗
92. Characteristics of cutting forces and chip formation in machining of titanium alloys10.1016/j.ijmachtools.2009.02.008 ↗
93. On the mechanics of chip segmentation in machining
94. Effects of continuous minimum quantity lubrication with ultrasonic vibration in turning of titanium alloy10.1007/s00170-018-2323-0 ↗
95. New observations on the mechanism of chip formation when machining titanium alloys10.1016/0043-1648(81)90242-8 ↗
96. Experimental characterisation of the performance of hybrid cryo-lubrication assisted turning of Ti–6Al–4V alloy
97. Wear mechanisms of WC–10Ni3Al carbide tool in dry turning of Ti6Al4V10.1016/j.ijrmhm.2014.09.019 ↗
98. Chip formation characteristics in the machining of titanium alloys: a review
99. Prediction of machining-induced phase transformation and grain growth of Ti-6Al-4 V alloy10.1007/s00170-016-8497-4 ↗
100. Microstructure effects on process outputs in micro scale milling of heat treated Ti6Al4V titanium alloys10.1016/j.jmatprotec.2017.09.042 ↗