journal article·2016-03

Characterization of geopolymer fly-ash based foams obtained with the addition of Al powder or H2O2 as foaming agents

V. Ducman, L. Korat

Publisher page

Abstract

Abstract Recent innovations in geopolymer technology have led to the development of various different types of geopolymeric products, including highly porous geopolymer-based foams, which are formed by the addition of foaming agents to a geopolymer fly-ash based matrix. These agents decompose, or react with the liquid matrix or oxygen in the matrix, resulting in the release of gases which form pores prior to the hardening of the gel. The hardened structure has good mechanical and thermal properties, and can therefore be used for applications in acoustic panels and in lightweight pre-fabricated components for thermal insulation purposes. This study presents the results of the pore-forming process in the case when two different foaming agents, i.e. aluminium powder amounting to 0.07, 0.13 and 0.20 mass. % and H 2 O 2 amounting to 0.5, 1.0, 1.5 and 2.0 mass. %, were added to a fly-ash geopolymer matrix. The physical, mechanical, and microstructural properties of the thus obtained foams, and the effects of the type and amount of the added foaming agent, are presented and discussed. Highly porous structures were obtained in the case of both of the investigated foaming agents, with overall porosities up to 59% when aluminium powder was added, and of up 48% when H 2 O 2 was added. In the latter case, when 2% of the H 2 O 2 foaming agent was added, finer pores (with diameters up to 500 μm) occurred in the structure, whereas somewhat larger pores (some had diameters greater than 1 mm) occurred when the same amount of aluminium powder was added. The mechanical properties of the investigated foams depended on their porosity. In the case of highly porous structures a compressive strength of 3.3 MPa was nevertheless achieved for the samples containing 0.2% of aluminium powder, and 3.7 MPa for those containing 2.0% of H 2 O 2 .
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Durability of geopolymer materials in sodium and magnesium sulfate solutions10.1016/j.cemconres.2004.09.002 ↗
2. Environmental, physical and structural characterisation of geopolymer matrixes synthesised from coal (co) combustion fly ashes10.1016/j.jhazmat.2007.10.008 ↗
3. Fire resistant geopolymer produced by granulated blast furnace slag10.1016/S0892-6875(03)00008-6 ↗
4. Technical and commercial progress in the adoption of geopolymer cement10.1016/j.mineng.2011.09.009 ↗
5. Geopolymers and other alkali activated materials: why, how, and what?10.1617/s11527-013-0211-5 ↗
6. The role of particle technology in developing sustainable construction materials10.1016/j.apt.2009.10.006 ↗
7. Preparation of ceramic foams from metakaolin-based geopolymer gels
8. Synthesis and characterization of coal fly-ash foamed geopolymer10.1016/j.proenv.2013.04.098 ↗
9. Potassium geopolymer foams made with a silica fume pore forming agent for thermal insulation10.1007/s10934-012-9572-3 ↗
10. Geopolymer foam concrete: an emerging material for sustainable construction10.1016/j.conbuildmat.2014.01.081 ↗
11. Alkali-activated concrete binders as inorganic thermal insulator materials
12. Fly ash-based geopolymer lightweight concrete using foaming agent10.3390/ijms13067186 ↗
13. Geopolymer foams by gelcasting10.1016/j.ceramint.2013.11.011 ↗
14. The influence of short fibres and foaming agents on the physical and thermal behaviour of geopolymer composites10.4028/www.scientific.net/AST.92.56 ↗
15. Alkali-activated fly ash foams — synthesis, chemo-physical properties and microstructure modelling10.4028/www.scientific.net/AST.92.14 ↗
16. Physical and mechanical properties of lightweight aerated geopolymer10.1016/j.conbuildmat.2015.01.043 ↗
17. Prediction of the compressive strength of alkali-activated geopolymeric concrete binders by neuro-fuzzy modelling: a case study
18. Crucial Insights on the Mix Design of Alkali-Activated Cement-Based Binders
19. Characterization of the morphology of cellular ceramics by 3D image processing of X-ray tomography10.1016/j.jeurceramsoc.2006.05.097 ↗
20. Porosity and microstructure characterization of building stones and concretes10.1016/j.enggeo.2008.06.014 ↗
21. Analysis of pore interconnectivity in bioactive glass foams using X-ray microtomography10.1016/j.scriptamat.2004.08.014 ↗
22. Alam MKA new technique for obtaining three-dimensional structures in pitch-based carbon foams10.1016/j.scriptamat.2005.12.060 ↗
23. Characterisation of the pore-forming process in lightweight aggregate based on silica sludge by means of X-ray micro-tomography (micro-CT) and mercury intrusion porosimetry (MIP)10.1016/j.ceramint.2013.02.037 ↗