Insight into austenite reversion and mechanical behavior of quenching and partitioning steel inherited hierarchical structure of martensite
Source abstract
Abstract
In this paper, the start microstructure of full martensite and dual phases comprising ferrite and martensite were introduced into quenching and partitioning (Q&P) steel to tailor the microstructural characteristics and mechanical behaviors, which was achieved by means of a pre-quenching treatment with various temperatures. It is revealed that the conventional Q&P sample possessed bimodal microstructure with predominantly blocky feature, while gradually changed from combination of blocky and lath structures into individually lath feature in pre-quenched Q&P samples. The reversed austenite presented different variants, which predominantly reproduced the orientation of parent austenite and occasionally possessed twin relationship, low angle misorientation or extraneous with parent austenite. The twin-related austenite included annealing twin and reversed twin, whilst the latter showed twin relationship with both neighbored annealing twin and parent austenite. The variant type of reversed austenite significantly influenced the characteristics of its orientation relationship with neighbored pre-quenched martensite. The pre-quenching treatment was favorable to improve the carbon content of meta-stable austenite before Q&P treatment, while the final carbon content in retained austenite was mainly controlled by the synergistic carbon partitioning of martensite and bainite on basis of thermodynamic calculation, accompanied with the partitioning of Mn and Si elements. Moreover, the pre-quenched martensite deformed coordinately in a unit of martensite packet and was beneficial to retard necking to improve ductility. The optimal mechanical properties were obtained with pre-quenching temperature near Ac 3 , possessing yielding strength of 623 MPa, ultimate tensile strength of 861 MPa and product of strength and elongation exceeding 28 GPa%, attributing to the positive TRIP effect originating from lath-like retained austenite with high carbon content and multi-level hierarchical microstructure inherited from pre-quenched martensite.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Fonstein · 2015
2. Quenching and partitioning martensite-a novel steel heat treatment10.1016/j.msea.2006.02.133 ↗
3. A study of microstructure, transformation mechanisms and correlation between microstructure and mechanical properties of a low alloyed TRIP steel10.1016/j.actamat.2004.02.044 ↗
4. Retained austenite in dual-phase silicon steels and its effect on mechanical properties10.1016/S0924-0136(01)00638-0 ↗
5. Microstructure-based model for the static mechanical behaviour of multiphase steels[J]10.1016/j.actamat.2005.10.059 ↗
6. Structure-properties relationship in TRIP steels containing carbide-free bainite
7. Thermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling10.1016/j.actamat.2005.08.017 ↗
8. The effect of morphology on the stability of retained austenite in a quenched and partitioned steel10.1016/j.scriptamat.2012.11.003 ↗
9. Effect of multi-step Austempering treatment on the microstructure and mechanical properties of a high silicon carbide-free Bainitic steel with bimodal Bainite distribution10.3390/met11122055 ↗
10. Carbon and strain partitioning in a quenched and partitioned steel containing ferrite10.1016/j.actamat.2018.12.019 ↗
11. The relationships of microstructure-mechanical properties in quenching and partitioning (Q&P) steel accompanied with microalloyed carbide precipitation10.1016/j.msea.2018.03.061 ↗
12. Ensuring combination of strength, ductility and toughness in medium-manganese steel through optimization of nano-scale metastable austenite10.1016/j.matchar.2017.11.058 ↗
13. Hu · 2019 · 152 · 21
14. Carbon partitioning into austenite after martensite transformation10.1016/S1359-6454(03)00059-4 ↗
15. Microstructural development during the quenching and partitioning process in a newly designed low-carbon steel10.1016/j.actamat.2011.06.014 ↗
16. Microstructure characterization and mechanical behavior analysis in a high strength steel with different proportions of constituent phases10.1016/j.msea.2018.08.018 ↗
17. Microstructure and mechanical properties of an ultrahigh-strength 40SiMnNiCr steel during the one-step quenching and partitioning process10.1007/s11661-010-0184-8 ↗
18. Partitioning of carbon from supersaturated plates of ferrite, with application to steel processing and fundamentals of the bainite transformation10.1016/j.cossms.2004.09.003 ↗
19. Effect of carbon and manganese on the quenching and partitioning response of CMnSi steels10.2355/isijinternational.51.137 ↗
20. Effect of intercritical deformation on microstructure and mechanical properties of a low-silicon aluminum-added hot-rolled directly quenched and partitioned steel10.1016/j.msea.2016.01.040 ↗
21. Quantitative investigation into the influence of temperature on carbide and austenite evolution during partitioning of a quenched and partitioned steel10.1016/j.scriptamat.2016.04.027 ↗
22. Comparison on mechanical properties and microstructure of a C-Mn-Si steel treated by quenching and partitioning (Q&P) and quenching and tempering (Q&T) processes10.1016/j.msea.2014.09.047 ↗
23. Influence of bainite reaction on the kinetics of carbon redistribution during the quenching and partitioning process10.1016/j.actamat.2017.09.048 ↗
24. Response of retained austenite toquenching temperature in a novel low density Fe-Mn-Al-C steel processed by hotrolling-air cooling followed by non-isothermal partitioning10.1016/j.msea.2019.03.043 ↗
25. Stepping-quenching-partitioning treatment of 20SiMn2MoVA steel and effects of carbon and carbide forming elements10.1007/s11431-012-4884-8 ↗
26. Enhanced stability of retained austenite and consequent work hardening rate through pre-quenching prior to quenching and partitioning in a Q-P microalloyed steel10.1016/j.msea.2014.05.074 ↗
27. Effect of ultragrain refinement on quenching and partitioning steels manufactured by a novel method10.1016/j.matdes.2015.08.073 ↗
28. Influence of pre-tempering treatment on microstructure and mechanical properties in quenching and partitioning steels with ferrite-martensite start structure10.1016/j.msea.2019.04.047 ↗
29. Dual phase structure formed by partial reversion of cold-deformed martensite
30. Austenite formation and mechanical behavior of a novel TRIP-assisted steel with ferrite/martensite initial structure10.1016/j.msea.2020.140468 ↗
31. Effect of pre-existed austenite on austenite reversion and mechanical behavior of an Fe-0.2C-8Mn-2Al medium Mn steel10.1016/j.actamat.2018.01.009 ↗
32. Recrystallization and formation of austenite in deformed lath martensitic structure of low carbon steels10.1007/BF02642875 ↗
33. Abnormal α to γ transformation behavior of steels with a Martensite and Bainite microstructure at a slow reheating rate
34. A cyclic austenite reversion treatment for stabilizing austenite in the medium manganese steels10.1016/j.scriptamat.2017.03.038 ↗
35. Orientation of austenite reverted from martensite in Fe-2Mn-1.5Si-0.3C alloy10.1016/j.actamat.2017.11.003 ↗
36. Growth mode of austenite during reversion from martensite in Fe-2Mn-1.5Si-0.3C alloy: a transition in kinetics and morphology10.1016/j.actamat.2018.05.035 ↗
37. Effects of pre-tempering on Intercritical annealing in Fe-2Mn-0.3C alloy10.1007/s11661-014-2519-3 ↗
38. A novel design to enhance the amount of retained austenite and mechanical properties in low-alloyed steel10.1016/j.scriptamat.2014.06.014 ↗
39. Thermo-Calc Software TCFE Steels/Fe-alloys Database version 9. https://thermocalc.com/products/databases/steel-and-fe-alloys/ (accessed 20 January 2020).
40. Bhadeshia · 2001
41. Elucidating the effect of Mn partitioning on interface migration and carbon partitioning during quenching and partitioning of the Fe-C-Mn-Si steels: modeling and experiments10.1016/j.actamat.2017.11.025 ↗
42. Tailoring austenite stability and mechanical behaviors of IQ&P steel via prior bainite formation10.1016/j.msea.2021.141663 ↗
43. Crystallographic features of lath martensite in low-carbon steel10.1016/j.actamat.2005.11.001 ↗
44. The morphology and crystallography of lath martensite in Fe-C alloys10.1016/S1359-6454(02)00577-3 ↗
45. Quantitative analysis of variant selection for Displacive transformations under stress10.1007/s11661-011-0971-x ↗
46. Crossings of thin-plate martensites in an Fe-Ni-C alloy10.1016/0001-6160(79)90070-1 ↗
47. Interaction of martensite and bainite transformations and its dependence on quenching temperature in intercritical quenching and partitioning steels10.1016/j.matdes.2019.107921 ↗
48. Formation of austenite during intercritical annealing of dual-phase steels10.1007/BF02643686 ↗
49. Variant selection of reversed austenite in lath martensite10.2355/isijinternational.47.1527 ↗
50. Role of cementite and retained austenite on austenite reversion from martensite and bainite in Fe-2Mn-1.5Si-0.3C alloy10.1016/j.actamat.2021.116772 ↗
51. Christian · 2002
52. Significance of epitaxial ferrite formation on phase transformation kinetics in quenching and partitioning steels: modeling and experiment10.1007/s10853-019-03760-w ↗
53. Determination of retained austenite using CCE modelaccounting for isothermal transformation in a low density quenched andpartitioned steel10.1016/j.matlet.2018.12.076 ↗
54. Simultaneously enhancing strength-ductility synergy and strain hardenability via Si-alloying in medium-Al FeMnAlC lightweight steels10.1016/j.actamat.2022.118611 ↗