Texture evolution and the recrystallization behavior in a near β titanium alloy Ti-7333 during the hot-rolling process
Source abstract
Abstract
Abstract The texture evolution and the recrystallization behavior during the hot-rolling deformation were investigated in a hot-rolled Ti-7333 alloy. The texture of the rolled Ti-7333 mainly consists of the α-fiber component and a weak cubic component, and the orientation of {112} is dominant. The deformation mechanism during the rolling process is mainly the dislocation glide. It is found that the edge type dislocation of {110} is prevail during the deformation and has a closely relationship with the texture evolution. The recrystallization occurs, and different nucleation sites for the recrystallized grains are observed. The texture of the recrystallized grains inherits the texture of the deformed matrix, indicating that the nucleation sites of the recrystallized grains are selective. Results show that the recrystallized grains nucleated at the bulged boundaries hold the similar orientations with the deformed matrix, indicating that the recrystallization process is mainly controlled by the SIBM mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Magnesium Alloys: Properties and Applications · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Candidate materials for high-strength fastener applications in both the aerospace and automotive industries10.1361/105994905X75466 ↗
2. Properties of TIMETAL 555 (Ti-5Al-5Mo-5V-3Cr-0.6 Fe)10.1361/105994905X75628 ↗
3. Precipitation behavior of α phase during aging treatment in a β-quenched Ti-7333, Mate10.1016/j.matchar.2018.04.008 ↗
4. Characteristics of a hot-rolled near β titanium alloy Ti-733310.1016/j.matchar.2017.04.031 ↗
5. Concentration and fluid flow effects on kinetics, dendrite remelting and stress accumulation upon rapid solidification of deeply undercooled alloys10.1016/j.jallcom.2018.02.065 ↗
6. Texture evolution and dynamic recrystallization in a beta titanium alloy during hot-rolling process10.1016/j.jallcom.2014.08.129 ↗
7. Texture inhomogeneity in a Ti–Nb-based β-titanium alloy after warm rolling and recrystallization10.1016/j.msea.2007.06.077 ↗
8. An experimental study on the mechanism of texture evolution during hot-rolling process in a β titanium alloy10.1016/j.jallcom.2014.03.070 ↗
9. In situ observation of texture and microstructure evolution during rolling and globularization of Ti–6Al–4V10.1016/j.actamat.2012.11.037 ↗
10. The influence of rolling temperature on texture evolution and variant selection during α → β → α phase transformation in Ti–6Al–4V10.1016/j.actamat.2012.07.025 ↗
11. Tracking microstructure, texture and boundary misorientation evolution of hot deformed and post-deformation annealed Ti–6Al–4V alloy10.1016/j.msea.2015.09.060 ↗
12. Effects of cold-rolling deformation on texture evolution and mechanical properties of Ti-29Nb-9Ta-10Zr alloy10.1016/j.msea.2013.08.010 ↗
13. Texture evolution in TLM titanium alloy during uniaxial compression10.1016/j.msea.2013.08.077 ↗
14. Dynamic recrystallization mechanisms during high speed rolling of Mg–3Al–1Zn alloy sheets10.1016/j.scriptamat.2015.10.040 ↗
15. Characterization of the deformation texture after tensile test and cold rolling of a Ti-6Al-4V sheet alloy
16. Microstructure–texture–mechanical properties relationship in multi-pass warm rolled Ti–6Al–4V Alloy10.1016/j.msea.2013.09.087 ↗
17. Nucleation and preferential growth mechanism of recrystallization texture in high purity binary magnesium-rare earth alloys10.1016/j.actamat.2017.07.038 ↗
18. Recrystallization behavior of a high-manganese steel: experiments and simulations10.1016/j.actamat.2015.08.057 ↗
19. Core structure of screw dislocations in body-centred cubic metals: relation to symmetry and interatomic bonding10.1080/14786430310001611644 ↗
20. Dislocation relaxation processes in body-centred cubic metals
21. The effect of metastability on room temperature deformation behavior of β and α+β titanium alloys10.1007/s10853-009-4178-0 ↗
22. Correlation of tensile properties, deformation modes, and phase stability in commercial β-phase titanium alloys10.1007/BF02825707 ↗
23. In situ TEM study of dislocation slip in a metastable β titanium alloy10.1016/j.scriptamat.2011.11.036 ↗
24. Conventional vs harmonic-structured β-Ti-25Nb-25Zr alloys: a comparative study of deformation mechanisms10.1016/j.actamat.2018.09.032 ↗
25. Dislocation mobility in gum metal β-titanium alloy studied via in situ transmission electron microscopy10.1103/PhysRevB.84.020201 ↗
26. Kelly · 2000 · 132
27. A method to identify dislocations in a known crystal structure by transmission electron microscopy10.1107/S0021889811041173 ↗
28. Suwas · 2014 · 77
29. Tensile-compressive yield asymmetries in high strength wrought magnesium alloys10.1016/0956-716X(94)90159-7 ↗