journal article·2021-04

Dynamic recrystallization and solute precipitation during friction stir assisted incremental forming of AA2024 sheet

Xuepeng Zhan, Xinmei Liu, Mei Yang, Meng Li, Xifeng Li, Jun Chen

Publisher page

Abstract

Abstract Friction stir assisted incremental sheet forming (FS-ISF) has been proved to further improve the formability of aluminum alloy sheets. Under such thermal forming condition, it is quite necessary to explore if the recrystallization and solute precipitation would happen, which might have potential in further improve the strength of aluminum alloy conventionally realized by heat treatment aging. In the present work, FS-ISF experiments are conducted for AA2024 sheet with proper parameters to achieve more solute precipitates and fine recrystallized grains with stable boundaries, of which microstructure evolutions are characterized by Transmission Electron Microscopy (TEM) and Electron Backscattered Diffraction (EBSD). It's found that cyclic and incremental plastic deformation during FS-ISF induces dislocation jogs and dislocation loops, and finally makes solute move into vacancies and generates solute precipitates. And friction stir also contributes to more solute precipitates than conventional incremental sheet forming (CISF) at room temperature. Meanwhile, precipitation zone inside grains helps to resist ductility damage and stable boundary with pinning contributes to higher strength. Besides, irregular sub-boundaries are merged and sub-boundaries consume dislocations to form new boundaries by the slip and arrangement of dislocations during dynamic recrystallization so that fine equiaxed grains with high angle boundaries are obtained, which results in higher yield strength (YS), ultimate tensile strength (UTS) and better ductility than those by CISF. Furthermore, investigations also demonstrate that static recrystallization cannot arise during FS-ISF.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Metal Forming Simulation Techniques · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Evaluation of deformation stability and fracture mechanism in incremental sheet forming10.1016/j.ijmecsci.2017.03.012 ↗
2. Ductile damage and deformation mechanics in multistage single point incremental forming10.1016/j.ijmecsci.2017.12.051 ↗
3. Force prediction for single point incremental forming deduced from experimental and FEM observations10.1007/s00170-009-2160-2 ↗
4. Reduction of geometric deviation by multi-pass incremental forming combined with tool path compensation for non-axisymmetric aluminum alloy component with stepped feature10.1007/s00170-018-3194-0 ↗
5. Influence of the initial grain size in single point incremental forming process for thin sheets metal and microparts: experimental investigations10.1016/j.matdes.2012.08.077 ↗
6. Microstructure and texture based analysis of forming behavior and deformation mechanism of AA1050 sheet during single point incremental forming10.1016/j.jmatprotec.2018.11.012 ↗
7. Elucidating the deformation modes in incremental sheet forming process: insights from crystallographic texture, microstructure and mechanical properties10.1016/j.msea.2020.139311 ↗
8. Mechanism investigation for the influence of tool rotation and laser surface texturing (LST) on formability in single point incremental forming10.1016/j.ijmachtools.2013.06.007 ↗
9. Experimental investigations on friction stir assisted single point incremental forming of low-ductility aluminum alloy sheet for higher formability with reasonable surface quality10.1016/j.jmatprotec.2019.116488 ↗
10. Investigations on failure-to-fracture mechanism and prediction of forming limit for aluminum alloy incremental forming process10.1016/j.jmatprotec.2020.116687 ↗
11. Microstructure and mechanical properties of magnesium alloy sheet by friction heating single point incremental forming
12. Experimental investigations on the effects of rotational speed on temperature and microstructure variations in incremental forming of T6- tempered and annealed AA2219 aerospace alloy10.3390/met10060809 ↗
13. Microstructural investigation of friction stir welded 7050-T651 aluminium10.1016/S1359-6454(02)00449-4 ↗
14. Precipitation strengthening of aluminum alloys by room-temperature cyclic plasticity10.1126/science.aav7086 ↗
15. Dynamic precipitation, segregation and strengthening of an Al-Zn-mg-cu alloy (AA7075) processed by high-pressure torsion10.1016/j.actamat.2018.09.060 ↗
16. Influencing factor analysis on the surface quality of incremental forming parts10.3901/JME.2013.08.084 ↗