Properties and microstructure characterisation of high-strength, high-conductivity and high-resistance to arc ablation Cu-0.6Te-0.3Cr-0.15Zr-0.008P alloy
Source abstract
Abstract
In this paper, the intermetallic compound ZrTe 2 phase is formed within a copper matrix by data-driven elemental screening. This low melting point ZrTe 2 phase is uniformly and diffusely distributed within the copper matrix, which avoids the need for an energy-intensive process while providing superior resistance to arc ablation. On this basis, a novel Cu-0.6Te-0.3Cr-0.15Zr-0.008P alloy is designed and prepared, and the alloy achieves an electrical conductivity of 95.7 %IACS, a tensile strength of 302 MPa, and an elongation of 39.53% after the thermomechanical treatment. The ablation current of the novel alloy under large voltage is 31.2% lower than that of the Cu-0.6Te alloy, and the cross-sectional area of the ablation traces is reduced by 85%, which effectively illustrates the substantial improvement of the novel alloy`s ability to resist arc ablation. There are ZrTe 2 phases of 0.5–2 μm as well as pure Cr phases of about 5–20 nm in the alloy. The ZrTe 2 phases absorbs heat through melting decomposition to achieve arc extinction, and the Cr phases pinning dislocations to promote strength enhancement. In addition, the synergistic addition of Cr and Zr plays a role in the grain refinement of the alloy, and the average size of the grains decreases from 4.2 μm to 3.1 μm, a decrease of 26%, under the same process. This novel CuTe alloy with high strength, high conductivity and high resistance to arc abrasion is easy to produce and low energy consumption, and is expected to be widely used in the new generation of high-voltage fast-charging electrical connector materials for new energy vehicles.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metal and Thin Film Mechanics · Metallurgical and Alloy Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Welfare analysis of government subsidy programs for fuel-efficient vehicles and new energy vehicles in China10.1007/s10640-019-00353-8 ↗
2. Properties of vacuum cast CuCr25 and CuCr25Te contact material10.1016/S1003-6326(10)60086-6 ↗
3. Trends in automotive battery cell design: a statistical analysis of empirical data10.3390/batteries9050261 ↗
4. Quantitative mechanisms behind the high strength and electrical conductivity of Cu-Te alloy manufactured by continuous extrusion10.1016/j.jmst.2021.12.046 ↗
5. pT phase diagram of the Cu-Te system10.1007/s10789-005-0242-6 ↗
6. A torsion–effusion study on the sublimation of Cu2Te10.1016/S0254-0584(00)00408-9 ↗
7. Advanced electric vehicle fast-charging technologies10.3390/en12101839 ↗
8. Review of fast charging strategies for lithium-ion battery systems and their applicability for battery electric vehicles10.1016/j.est.2021.103306 ↗
9. The UltraBattery—A new battery design for a new beginning in hybrid electric vehicle energy storage10.1016/j.jpowsour.2008.11.119 ↗
10. Effects of annealing process on electrical conductivity and mechanical property of Cu-Te alloys10.1016/S1003-6326(06)60078-2 ↗
11. Mathematical modeling of multiphase flow in steel continuous casting10.2355/isijinternational.ISIJINT-2018-743 ↗
12. Enhanced strength, ductility and electrical conductivity of Cu–Te alloys via dynamic recrystallization and precipitation10.1016/j.msea.2021.141548 ↗
13. Effects of rolling and annealing on microstructures and properties of Cu–Mg–Te–Y alloy10.1016/S1003-6326(14)63160-5 ↗
14. Applications of a tight-binding total-energy method for transition and noble metals: elastic constants, vacancies, and surfaces of monatomic metals10.1103/PhysRevB.54.4519 ↗
15. Formation mechanism and thermal stability of C15-laves phase in a Hf-containing Co-based superalloy10.1016/j.jallcom.2021.162016 ↗
16. Promoting ordering degree of intermetallic fuel cell catalysts by low-melting-point metal doping10.1038/s41467-023-41590-2 ↗
17. Formation of high-strength β’ precipitates in Mg–RE alloys: the role of the Mg/β ″interfacial instability10.1016/j.actamat.2014.09.024 ↗
18. The mechanisms of grain growth of Mg alloys: a review10.1016/j.jma.2022.09.001 ↗
19. Enhancing strengthening effect of topologically close-packed superlattices in medium-entropy alloys via enabling imperfect atomic packing10.1016/j.actamat.2024.119903 ↗
20. Evolution of crystallite size, lattice parameter and internal strain in Al precipitates during high energy ball milling of partly amorphous Al87Ni8La5 alloy10.1016/j.msea.2014.03.004 ↗
21. Correlation of local microstructures and mechanical properties of Al–Zn–Mg–Cu alloy build fabricated via underwater friction stir additive manufacturing10.1016/j.msea.2020.140590 ↗
22. A multiphase solute diffusion model for dendritic alloy solidification10.1007/BF02659502 ↗
23. Precipitation and hardening in magnesium alloys10.1007/s11661-012-1217-2 ↗
24. High mechanical strengthened CNTs/Al composite concepts with robust interface and intragranular reinforcement achieved via interfacial thermite reaction10.1016/j.compositesa.2023.107630 ↗
25. Phase transition induced thermoelectric properties of Cu2Te by melt growth process10.1016/j.matlet.2021.129957 ↗
26. Polymorphic transformation from metastable β to stable α phase in MnTe flake10.35848/1347-4065/ad32e7 ↗
27. Thermodynamic investigation of the Ag Te and Cu Te eutectic alloys10.1016/0925-8388(95)01560-4 ↗
28. Westrum · 1986
29. Enthalpies of formation of solid cobalt-tellurium alloys10.1007/BF00914501 ↗
30. Thermodynamic properties of CoTe2
31. Jiang · 2010
32. Structural and optical properties of chalcogenide glass-ceramics
33. Structure, properties, and bonding of ZrTe (MnP type), a low-symmetry, high-temperature modification of ZrTe (WC type)10.1021/ja004164r ↗
34. Solvent-free mechanochemical synthesis and characterization of nickel tellurides with various stoichiometries: NiTe, NiTe2 and Ni2Te310.3390/nano11081959 ↗
35. One-pot hydrothermal synthesis of Cu2Te/NiTe nanocomposite materials: a structural, morphological, and optical study10.1111/jace.19251 ↗
36. Thermo physico-chemical investigations on A–Te–O (A= Cr, Fe, Ni) system10.1016/j.tca.2014.03.016 ↗
37. Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles10.1038/nature16445 ↗
38. Orientation relationships between precipitates and matrix and their crystallographic transformation in a Cu–Cr–Zr alloy10.1016/j.msea.2022.143576 ↗
39. A review on copper alloys with high strength and high electrical conductivity