journal article·2015-02Open access

Structural evolution and strain induced mixing in Cu–Co composites studied by transmission electron microscopy and atom probe tomography

A. Bachmaier, H. Aboulfadl, M. Pfaff, F. Mücklich, C. Motz

Abstract

A Cu–Co composite material is chosen as a model system to study structural evolution and phase formations during severe plastic deformation. The evolving microstructures as a function of the applied strain were characterized at the micro-, nano-, and atomic scale-levels by combining scanning electron microscopy and transmission electron microscopy including energy-filtered transmission electron microscopy and electron energy-loss spectroscopy. The amount of intermixing between the two phases at different strains was examined at the atomic scale using atom probe tomography as complimentary method. It is shown that Co particles are dissolved in the Cu matrix during severe plastic deformation to a remarkable extent and their size, number, and volume fraction were quantitatively determined during the deformation process. From the results, it can be concluded that supersaturated solid solutions up to 26 at.% Co in a fcc Cu–26 at.% Co alloy are obtained during deformation. However, the distribution of Co was found to be inhomogeneous even at the highest degree of investigated strain.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Materials Characterization Techniques · Microstructure and mechanical properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Producing bulk ultrafine-grained materials by severe plastic deformation10.1007/s11837-006-0213-7 ↗
2. Using high-pressure torsion for metal processing: fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
3. Extreme grain refinement by severe plastic deformation: a wealth of challenging science10.1016/j.actamat.2012.10.038 ↗
4. Generation of metallic nanocomposites by severe plastic deformation10.1179/1743280412Y.0000000003 ↗
5. Homogenization of metal matrix composites by high-pressure torsion10.1007/s11661-005-0281-2 ↗
6. Characterization of tungsten fragmentation in a W–25%Cu composite after high-pressure torsion10.1016/j.matchar.2006.08.001 ↗
7. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
8. Microstructure and thermostability of a W–Cu nanocomposite produced via high-pressure torsion10.1080/14786435.2012.704426 ↗
9. Homogeneous Cu–Fe supersaturated solid solutions prepared by severe plastic deformation10.1080/14786430903313682 ↗
10. Nanostructure and properties of a Cu–Cr composite processed by severe plastic deformation10.1016/j.scriptamat.2008.02.010 ↗
11. Mechanical alloying of Cu and Fe induced by severe plastic deformation of a Cu–Fe composite10.1016/j.actamat.2005.01.024 ↗
12. Nanocrystalline structure of non-equilibrium FeCu alloys obtained by severe plastic deformation under pressure10.1016/0965-9773(95)00090-9 ↗
13. The formation of supersaturated solid solutions in Fe–Cu alloys deformed by high-pressure torsion10.1016/j.actamat.2011.10.044 ↗
14. New insights on the formation of supersaturated solid solutions in the Cu–Cr system deformed by high-pressure torsion10.1016/j.actamat.2014.02.003 ↗
15. The Co–Cu (Cobalt–Copper) system10.1007/BF02868953 ↗
16. Formation of thermodynamically unstable solid solutions in the Cu–Co system by mechanical alloying10.1103/PhysRevB.48.13244 ↗
17. Nanogranulation process into magneto-resistant Co–Cu alloy on the route of bulk mechanical alloying10.1016/S0921-5093(00)00709-7 ↗
18. Metallic composites processed via extreme deformation: toward the limits of strength in bulk materials10.1557/mrs2010.703 ↗
19. Three-dimensional atom-probe tomography: advances and applications10.1146/annurev.matsci.37.052506.084200 ↗
20. Gault · 2012
21. Comparison between conventional Vickers hardness and indentation hardness obtained with different instruments10.3139/146.101168 ↗
22. Technical parameters affecting grain refinement by high pressure torsion
23. Equivalent strains in severe plastic deformation10.1002/adem.200310085 ↗
24. Image processing with ImageJ
25. In situ site-specific specimen preparation for atom probe tomography10.1016/j.ultramic.2006.06.008 ↗
26. A general protocol for the reconstruction of 3D atom probe data10.1016/0169-4332(94)00561-3 ↗
27. The post-ionization of field evaporated ions: a theoretical explanation of multiple charge states10.1016/0039-6028(82)90434-4 ↗
28. Miller · 1996
29. Pearson · 1904
30. Correlation and contingency analysis of atom probe data: diffusion-controlled dissolution of precipitates
31. Analysis of conventional and three-dimensional atom probe data for multiphase analysis10.1063/1.356258 ↗
32. Local magnification effects in the atom probe10.1016/0039-6028(91)90449-3 ↗
33. Trajectory overlaps and local magnification in three-dimensional atom probe10.1063/1.126545 ↗
34. Atom probe tomography and transmission electron microscopy characterisation of precipitation in an Al–Cu–Li–Mg–Ag alloy10.1016/j.ultramic.2010.12.004 ↗
35. Saturation of fragmentation during severe plastic deformation10.1146/annurev-matsci-070909-104445 ↗
36. Microstructure and mechanical properties of pure Cu processed by high-pressure torsion10.1016/j.msea.2008.06.039 ↗
37. Ozturk · Mater. Sci. Eng. A · 1994 · 175 · 86110.1016/0921-5093(94)91051-0 ↗
38. Atomic-scale intermixing, amorphization and microstructural development in a multicomponent system subjected to surface severe plastic deformation10.1016/j.actamat.2012.11.001 ↗
39. Turcotte · 1992
40. The effect of particle distribution on damage formation in particulate reinforced metal matrix composites deformed in compression10.1016/S0921-5093(96)10461-5 ↗
41. Lawn · 1993
42. A general strength distribution function for brittle materials10.1016/0955-2219(92)90021-5 ↗
43. High-pressure torsion of pure cobalt: hcp–fcc phase transformations and twinning during severe plastic deformation10.1063/1.4804273 ↗