journal article·2024-11

Microstructure and mechanical properties of wire and arc additive manufactured 2319 aluminum alloy treated by laser shock peening

Jun Xiao, Wei Guo, Hongqiang Zhang, Wei Dai, Ying Zhu, Baoqiang Cong, Zewu Qi, Hongbin Zhu, Xin Ren, Minggao Li

Publisher page

Abstract

The components manufactured by Wire and Arc Additive Manufacturing (WAAM) have some problems to be solved urgently, such as uneven microstructure, numerous pore defects, and residual tensile stress. Laser Shock Peening (LSP) is an innovative and advanced surface modification technology that improves mechanical characteristics by inducing significant plastic deformation and high compressive residual stress on metal surfaces. Therefore, combining LSP with WAAM is expected to solve its existing problems. In this work, LSP with different energy parameters was used to post-process the WAAM 2319 aluminum alloy. The results indicated that LSP could improve the microstructure, eliminate near-surface pores, harden the surface layer, and induce a residual compressive stress layer, and the effect was more effective with the increase of laser energy applied. The yield strength of the peened specimens significantly increased by 60.73 %, and the ultimate tensile strength also increased by 16.03 %. The hole fatigue life of the peened specimens was significantly improved, increasing by 179.8 % and 261.7 %, respectively, applying laser energies of 5 J and 10 J. Therefore, the engineering industry may benefit from a combination of LSP and WAAM technology.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface Treatment and Residual Stress · Additive Manufacturing Materials and Processes · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Local microstructure evolution and mechanical performance of friction stir additive manufactured 2195 Al-Li alloy10.1016/j.matchar.2022.111818 ↗
2. Mechanical properties and precipitation behavior of the heat-treated wire+ arc additively manufactured 2219 aluminum alloy10.1016/j.matchar.2020.110735 ↗
3. Wire plus arc additive manufacturing10.1179/1743284715Y.0000000073 ↗
4. Recent development in aluminium alloys for aerospace applications10.1016/S0921-5093(99)00674-7 ↗
5. Precipitation behavior of aluminum alloy 2139 fabricated using additive manufacturing10.1016/j.msea.2015.08.088 ↗
6. Mechanical properties of 2219-Al components produced by additive manufacturing with TIG10.1007/s00170-015-8168-x ↗
7. A comparative study of additive manufacturing techniques: residual stress and microstructural analysis of CLAD and WAAM printed Ti-6Al-4V components
8. Pore formation and evolution in wire plus arc additively manufactured 2319 Al alloy
9. Thermo-mechanical analysis of wire and arc additive layer manufacturing process on large multi-layer parts10.1016/j.commatsci.2011.06.023 ↗
10. Effect of heat treatment on the microstructure and mechanical properties of AZ80M magnesium alloy fabricated by wire arc additive manufacturing10.1016/j.jma.2021.04.006 ↗
11. Microstructure evolution of wire-arc additively manufactured 2319 aluminum alloy with interlayer hammering
12. Fatigue crack growth behaviour of an Al-Mg4. 5Mn alloy fabricated by hybrid in situ rolled wire+arc additive manufacturing10.1016/j.ijfatigue.2021.106382 ↗
13. Laser shock processing and its effects on microstructure and properties of metal alloys: a review10.1016/S0142-1123(02)00022-1 ↗
14. Investigation of microstructure and mechanical properties evolution in 7050 aluminum alloy and 316L stainless steel treated by laser shock peening10.1016/j.matchar.2021.111571 ↗
15. Laser shock peening regulating aluminum alloy surface residual stresses for enhancing the mechanical properties: roles of shock number and energy10.1016/j.surfcoat.2021.127481 ↗
16. Grain refinement of LY2 aluminum alloy induced by ultra-high plastic strain during multiple laser shock processing impacts10.1016/j.actamat.2010.03.026 ↗
17. Microstructure, residual stress and tensile properties control of wire-arc additive manufactured 2319 aluminum alloy with laser shock peening10.1016/j.jallcom.2018.02.353 ↗
18. Gradient microstructure and vibration fatigue properties of 2024-T351 aluminium alloy treated by laser shock peening10.1016/j.surfcoat.2020.125698 ↗
19. Improvement in fatigue properties of 2024-T351 aluminum alloy subjected to cryogenic treatment and laser peening10.1016/j.surfcoat.2018.03.088 ↗
20. Effects of laser shock peening on the microstructure and fatigue crack propagation behaviour of thin AA2024 specimens10.1016/j.ijfatigue.2017.01.042 ↗
21. Laser shock peening: a promising tool for tailoring metallic microstructures in selective laser melting10.1016/j.jmatprotec.2018.11.024 ↗
22. 3D laser shock peening–a new method for the 3D control of residual stresses in selective laser melting
23. Simulating tortuous 3D morphology of microporosity formed during solidification of Al–Si–cu alloys10.1179/136404607X240580 ↗
24. Grain structures in aluminum alloy GTA welds10.1007/BF02653489 ↗
25. The heterogeneous band microstructure and mechanical performance in a wire+arc additively manufactured 2219 Al alloy
26. The strengthening effect of inter-layer cold working and post-deposition heat treatment on the additively manufactured Al–6.3 cu alloy10.1016/j.msea.2015.10.101 ↗
27. Application of ANOVA method to precipitation behaviour studies10.1016/j.msea.2005.02.021 ↗
28. State of the art of deep rolling10.1016/j.precisioneng.2016.05.001 ↗
29. Bimodal nanocrystallization of NiTi shape memory alloy by laser shock peening and post-deformation annealing10.1016/j.actamat.2011.07.070 ↗
30. Tailoring precipitation of directed energy deposited Al-cu alloy via laser shock peening
31. The effect of inter-layer cold working and post-deposition heat treatment on porosity in additively manufactured aluminum alloys10.1016/j.jmatprotec.2015.11.006 ↗
32. Improving the strength and ductility of laser directed energy deposited CrMnFeCoNi high-entropy alloy by laser shock peening
33. Tailoring properties of directed energy deposited Al-mg alloy by balancing laser shock peening and heat treatment10.1016/j.jmst.2024.03.051 ↗
34. Laser-shock processing effects on surface microstructure and mechanical properties of low carbon steel10.1016/S0921-5093(98)00889-2 ↗
35. Microstructure and mechanical properties of laser shock peened 38CrSi steel
36. Experimental measurement of biaxial thermal stress fields caused by arc welding10.1016/j.jmatprotec.2011.12.006 ↗
37. State of the art of deep rolling10.1016/j.precisioneng.2016.05.001 ↗
38. Bimodal nanocrystallization of NiTi shape memory alloy by laser shock peening and post-deformation annealing10.1016/j.actamat.2011.07.070 ↗
39. Fatigue performance improvement in AISI 4140 steel by dynamic strain aging and dynamic precipitation during warm laser shock peening10.1016/j.actamat.2010.10.032 ↗
40. Residual stress and fatigue life in laser shock peened open hole samples10.1016/j.ijfatigue.2012.06.011 ↗
41. Tensile properties, residual stress distribution and grain arrangement as a function of sheet thickness of mg–Al–Mn alloy subjected to two-sided and simultaneous LSP impacts10.1016/j.apsusc.2016.02.045 ↗
42. Developing a high-strength Al-mg-Si-Sc-Zr alloy for selective laser melting: crack-inhibiting and multiple strengthening mechanisms10.1016/j.actamat.2020.03.060 ↗
43. Hall–Petch and dislocation strengthening in graded nanostructured steel10.1016/j.actamat.2012.07.037 ↗
44. Effect of laser shock peening on high cycle fatigue failure of bolt connected AA2024-T351 hole structures10.1016/j.engfailanal.2022.106625 ↗