Effect of the heat treatment on the mechanical properties and microstructure of Scalmalloy® manufactured by Selective Laser Melting (SLM) under certified conditions
Source abstract
Abstract
Mechanical properties and microstructure of Scalmalloy® processed by Selective Laser Melting (SLM) under certified conditions are studied. Two types of samples are considered: as-built and heat-treated at 325 °C for 4 h. The heat treatment does not modify the grain size or the texture. SEM images show a typical bi-modal microstructure comprising equiaxed fine grained zones (FGZ) with ≈ 0.6 μm grain size and coarse grained zones (CGZ) with ≈ 7.5 μm grain size (longitudinal axis). According to electron backscatter diffraction (EBSD) analysis, FGZ have ≈ 0.8 μm equivalent circle diameter (considering grain boundaries those with misorientation >150) and contain areas with and without texture, while CGZ have ≈ 2.7 μm equivalent circle diameter, and most of the grains are oriented with [001] crystal direction along the building direction. On the contrary, the heat treatment produces a stress relief that is evidenced in EBSD by reductions in the low angle grain boundaries (LAGB) content, grain orientation spread (GOS), and dislocation density. Both samples show plastic deformation before fracture and the as-built condition features Portevin-Le-Chatelier (PLC) effect. The heat-treated samples exhibit the highest strength (yield strength = 454 ± 3 MPa; tensile strength = 509 ± 6 MPa) and hardness (165 ± 3 HV) while the lowest percentage of reduction of area (16 ± 6%) and elongation (11 ± 2%). Finally, the electrical conductivity of the material increases after the heat treatment which is associated with the redistribution of Mg-atoms out of the solid solution and the growth of precipitates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (91)
Show source-provided references
1. Wohlers · Hist. Addit. Manuf. · 2017 · 1
2. Microstructure evolution and mechanical property response of 3D-printed Scalmalloy with different heat-treatment times at 325°C10.3390/met11040555 ↗
3. Microstructure evolution during selective laser melting of metallic materials: a review10.2351/1.5085206 ↗
4. Structural integrity of additively manufactured aluminum alloys: effects of build orientation on microstructure, porosity, and fatigue behavior
5. 3D printing of high-strength aluminium alloys10.1038/nature23894 ↗
6. A review of additive manufacturing10.5402/2012/208760 ↗
7. A design for the additive manufacture of functionally graded porous structures with tailored mechanical properties for biomedical applications10.1016/j.jmapro.2011.01.004 ↗
8. A review of metal additive manufacturing application and numerical simulation
9. Metal additive manufacturing: a review10.1007/s11665-014-0958-z ↗
10. Corrosion of metallic materials fabricated by selective laser melting10.1038/s41529-019-0086-1 ↗
11. Massive nanoprecipitation in an Fe-19Ni-xAl maraging steel triggered by the intrinsic heat treatment during laser metal deposition10.1016/j.actamat.2017.02.069 ↗
12. Microstructural evolution, nanoprecipitation behavior and mechanical properties of selective laser melted high-performance grade 300 maraging steel10.1016/j.matdes.2017.08.026 ↗
13. Advances in metal additive manufacturing: a review of common processes, industrial applications, and current challenges10.3390/app11031213 ↗
14. New aluminum alloys specifically designed for laser powder bed fusion: a review10.3390/ma12071007 ↗
15. Comparison of microstructure and mechanical properties of Scalmalloy® produced by selective laser melting and laser metal deposition10.3390/ma11010017 ↗
16. Process and mechanical properties: applicability of a scandium modified Al-alloy for laser additive manufacturing10.1016/j.phpro.2011.03.047 ↗
17. Microstructure and mechanical properties of as-processed scandium-modified aluminium using selective laser melting10.1016/j.cirp.2016.04.057 ↗
18. Microstructural features of Sc- and Zr-modified Al-mg alloys processed by selective laser melting10.1016/j.matdes.2016.11.040 ↗
19. Influence of SLM scan-speed on microstructure, precipitation of Al3Sc particles and mechanical properties in Sc- and Zr-modified Al-mg alloys10.1016/j.matdes.2017.11.053 ↗
20. SLM-processed Sc- and Zr- modified Al-mg alloy: mechanical properties and microstructural effects of heat treatment10.1016/j.msea.2017.06.089 ↗
21. Microstructure characterization of SLM-processed Al-Mg-Sc-Zr alloy in the heat treated and HIPed condition
22. A comparative investigation on the microstructure and mechavnical properties of additively manufactured aluminum alloys10.1016/j.ijfatigue.2021.106165 ↗
23. Synthesis of precipitation-strengthened Al-Sc, Al-Zr and Al-Sc-Zr alloys via selective laser melting of elemental powder blends
24. Selective laser melting of a high strength Al-Mn-Sc alloy: alloy design and strengthening mechanisms10.1016/j.actamat.2019.04.014 ↗
25. Rometsch · 2019
26. Mechanical anisotropy investigated in the complex SLM-processed Sc- and Zr-modified Al–Mg alloy microstructure10.1002/adem.201801113 ↗
27. Fatigue and failure analysis of an additively manufactured contemporary aluminum alloy
28. Fatigue strength estimation methodology of additively manufactured metallic bulk material
29. On the processability and mechanical behavior of Al–Mg–Sc alloy for PBF-LB10.1007/s40964-021-00216-z ↗
30. Influence of LPBF-surface characteristics on fatigue properties of Scalmalloy®10.3390/met11121961 ↗
31. Dynamic fracture behavior of additively manufactured Scalmalloy®: effects of build orientation, heat-treatment and loading-rate10.1016/j.msea.2021.141978 ↗
32. Fatigue crack growth behavior of Al-4.5Mg-0.6Sc-0.3Zr alloy processed by laser powder bed fusion10.1007/s11665-021-05989-6 ↗
33. Effects of powder reuse on the microstructure and mechanical behaviour of Al – Mg – Sc – Zr alloy processed by laser powder bed fusion (LPBF)
34. Revealing the effects of powder reuse for selective laser melting by powder characterization10.1007/s11837-018-3305-2 ↗
35. Measuring the spreadability of pre-treated and moisturized powders for laser powder bed fusion
36. Laser Powder Bed Fusion of an Al-Mg-Sc-Zr Alloy : Manufacturing, Peak Hardening Response and Thermal Stability at Peak Hardness
37. Effects of iron precipitation and novel metal screw extrusion on electrical conductivity and properties of AA1370 aluminium10.1016/j.mseb.2020.114505 ↗
38. A nanostructural design to produce high-strength Al alloys with enhanced electrical conductivity10.1016/j.scriptamat.2013.12.002 ↗
39. Electrical conductivity field analysis for evaluation of FSW joints in AA6013 and AA7075 alloys10.1016/j.jmatprotec.2010.08.030 ↗
40. Microstructure and mechanical properties in Al-mg-Sc alloy induced by hetero-deformation10.1016/j.matchar.2021.111622 ↗
41. Strengthening mechanisms in a Zr-modified 5083 alloy deformed to high strains10.1016/j.msea.2014.10.030 ↗
42. Influence of scanning strategy and parameter on microstructural feature, residual stress and performance of Sc and Zr modified Al–mg alloy produced by selective laser melting10.1016/j.msea.2020.139593 ↗
43. Anisotropic corrosion behavior of Sc and Zr modified Al-mg alloy produced by selective laser melting10.1016/j.corsci.2020.108657 ↗
44. Pitting and intergranular corrosion of Scalmalloy® aluminium aluminium alloy additively manufactured by selective laser melting (SLM)
45. Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder10.1016/j.actamat.2012.11.052 ↗
46. Role of melt pool boundary condition in determining the mechanical properties of selective laser melting AlSi10Mg alloy10.1016/j.msea.2018.10.083 ↗
47. Selective laser melting of a novel Sc and Zr modified Al-6.2 mg alloy: processing, microstructure, and properties10.1016/j.powtec.2017.06.050 ↗
48. Microstructural investigations on as-cast and annealed Al-Sc and Al-Sc-Zr alloys10.1016/j.matchar.2009.06.012 ↗
49. Chapter 12: Aluminium Scandium Alloys
50. Recent advances in ebsd characterization of metals10.3390/met10081097 ↗
51. Spierings · 2018
52. Effect of strain-induced precipitation on the low angle grain boundary in AA7050 aluminum alloy10.1016/j.matdes.2011.04.025 ↗
53. Deformation banding in a precipitation hardened aluminum alloy during simple shear deformation10.1016/j.scriptamat.2018.11.032 ↗
54. Plastic strain localization in metals: origins and consequences10.1016/j.pmatsci.2013.06.001 ↗
55. Regions of existence of special and non-special grain boundaries
56. High temperature thermal and mechanical stability of high-strength nanotwinned Al alloys10.1016/j.actamat.2018.11.011 ↗
57. The interaction mechanism of screw dislocations with coherent twin boundaries in different face-centred cubic metals10.1016/j.scriptamat.2005.11.072 ↗
58. Stabilizing nanostructures in metals using grain and twin boundary architectures10.1038/natrevmats.2016.19 ↗
59. Twin boundaries: strong or weak?10.1016/j.scriptamat.2008.07.037 ↗
60. Strain rate sensitivity of the additive manufacturing material Scalmalloy®10.1007/s40870-021-00298-4 ↗
61. Additive manufacturing of Scalmalloy ® satellite parts, 8Th Eur
62. Mechanical properties and deformation dependent microstructural aspects of laser shock peened 7075-T6 aluminum alloy without coating10.1016/j.matchar.2021.111620 ↗
63. Temperature and deformation effect on the low and high angle grain boundary structure of a double forged pure tungsten10.1016/j.ijrmhm.2015.01.008 ↗
64. Metadynamic recrystallization in A5083 aluminum alloy with homogenized and as-extruded initial microstructures10.1016/j.msea.2022.142789 ↗
65. Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD10.1016/j.msea.2010.01.004 ↗
66. Analysis of As-Built Microstructures and Recrystallization Phenomena on Inconel 625 Alloy Obtained via Laser Powder Bed Fusion (L-PBF)10.3390/met11040619 ↗
67. Effect of aging treatment on the microstructure and mechanical properties of Al-3.02Mg-0.2Sc-0.1Zr alloy printed by selective laser melting10.1016/j.matdes.2019.107668 ↗
68. Effect of Sc on microstructure and mechanical properties of as-cast Al-mg alloys10.1016/j.matdes.2015.10.132 ↗
69. Influences of initial microstructures on Portevin-Le Chatelier effect and mechanical properties of a Ni–Fe–Cr–Base Superalloy10.1002/adem.201800234 ↗
70. Chiu · 2006 · 20 · 4189
71. Effect of grain refinement on jerky flow in an Al-mg-Sc alloy10.1007/s11661-016-3381-2 ↗
72. The influence of shearable and nonshearable precipitates on the Portevin-Le Chatelier behavior in precipitation hardening AlMgScZr alloys10.1016/j.ijplas.2021.103120 ↗
73. Unusual behavior of the Portevin – Le Chatelier effect in an AlMg alloy containing precipitates10.1016/j.msea.2015.04.094 ↗
74. Serrated flow in aluminium alloys containing lithium10.1016/S1359-6454(97)00149-3 ↗
75. Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting10.1016/j.jnucmat.2015.12.034 ↗
76. Precipitation behavior, microstructure and mechanical properties of Al-4.8Mg-0.82Sc-0.28Zr alloy fabricated by selective laser melting10.1016/j.msea.2022.142949 ↗
77. Effects of natural aging and pre-aging on the strength and electrical conductivity in Al-mg-Si AA6201 conductor alloys10.1016/j.msea.2021.141538 ↗
78. Optimization of electrical conductivity and strength combination by structure design at the nanoscale in Al-mg-Si alloys10.1016/j.actamat.2015.07.039 ↗
79. Quantitative contributions of solution atoms, precipitates and deformation to microstructures and properties of Al–Sc–Zr alloys10.1016/S1003-6326(19)65000-4 ↗
80. Electrical conductivity of aluminium-rich AI-Si-IVIg alloys10.1007/BF00725503 ↗
81. Vargel · 2020
82. Characteristics of metal specimens formed by selective laser melting: a state-of-the-art review10.1007/s11665-020-05323-6 ↗
83. Heat treatment of aluminium alloys produced by laser powder bed fusion: a review10.1016/j.matdes.2021.109651 ↗
84. A review of heat treatments on improving the quality and residual stresses of the Ti–6Al–4V parts produced by additive manufacturing10.3390/met10081006 ↗
85. Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: microstructure evolution, mechanical properties and fracture mechanism10.1016/j.msea.2016.03.088 ↗
86. A selective laser melting and solution heat treatment refined Al-12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility10.1016/j.actamat.2015.05.017 ↗
87. Effect of optimized heat treatments on the tensile behavior and residual stresses of selective laser melted AlSi10Mg samples10.4028/www.scientific.net/KEM.813.364 ↗
88. Influence of heat treatment on the tool life while machining SLM Inconel 718 with reference to C&W Inconel 71810.1016/j.jmapro.2022.08.054 ↗
89. Microstructure and properties of SLM-Hastelloy X alloy after different hot isostatic pressing + heat treatment10.1016/j.msea.2022.143714 ↗
90. Effect of heat treatment on the microstructure evolution and mechanical behaviour of a selective laser melted Inconel 718 alloy10.1016/j.jallcom.2021.158613 ↗
91. Examination of inverse hall-Petch relation in nanostructured aluminum alloys by ultra-severe plastic deformation10.1016/j.jmst.2021.01.096 ↗