journal article·2023-09Open access

EBSD-data analysis of an additive manufactured maraging 300 steel submitted to different tempering and aging treatments

F.F. Conde, G.G. Ribamar, J.D. Escobar, A.L. Jardini, M.F. Oliveira, J.P. Oliveira, J.A. Avila

Abstract

Maraging is a high alloy steel sensitive to the precipitation of intermetallics from a supersaturated solid solution during aging heat treatments. The precipitation phenomenon is well described in the literature, which gave rise to the alloy name regarding a martensite matrix with precipitates formed by aging treatment. Many studies have been performed to characterize this material, usually subjected to many sample preparations for transmission microscopy, which is very laborious, and few EBSD analyses. Therefore, in this work, a large study was conducted using electron backscatter diffraction (EBSD) to analyze maraging microstructures through band-contrast, kernel average misorientation (KAM), grain orientation spread (GOS), and misorientation distribution. Our results show that solubilization of the additive manufactured maraging steel resulted in a more homogeneous microstructure with new angle grain boundaries. Furthermore, tempering heat treatments relieve martensite strain, increasing band contrast values. Posterior aging presented a low impact on the results of EBSD analysis.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Additive Manufacturing: an overview
2. F2792-12a - standard terminology for additive Manufacturing technologies
3. Gu · 2015
4. Gibson · 2015
5. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
6. Microstructure and mechanical properties of selective laser melted 18Ni300 steel microstructure and mechanical properties of selective laser melted10.1016/j.phpro.2011.03.033 ↗
7. Hoeges · 2022
8. Maraging steel for additive manufacturing – Philipp Stoll’s paper at DDMC 2016
9. ASM · 1991 · 4 · 3470
10. Decker · 1962 · 55 · 58
11. Precipitation hardening in 350 grade maraging steel10.1007/BF02646522 ↗
12. Nanoprecipitate-hardened 1.5 GPa steels with unexpected high ductility10.1016/j.scriptamat.2009.02.062 ↗
13. Austenite reversion kinetics and stability during tempering of an additively manufactured maraging 300 steel
14. Effect of thermal cycling and aging stages on the microstructure and bending strength of a selective laser melted 300-grade maraging steel10.1016/j.msea.2019.03.129 ↗
15. Some applications of Electron Back scattering diffraction (EBSD) in materials research10.5772/35267 ↗
16. Schwartz · 2000
17. Precipitation hardening in 350 grade maraging steel10.1007/BF02646522 ↗
18. E3, E3-11 standard guide for preparation of metallographic specimens 1
19. A novel pole figure inversion method: specification of the MTEX algorithm10.1107/S0021889808030112 ↗
20. A correlative approach to segmenting phases and ferrite morphologies in transformation-induced plasticity steel using electron backscattering diffraction and energy dispersive X-ray spectroscopy10.1016/j.ultramic.2014.07.005 ↗
21. An investigation into the use of electron back scattered diffraction to measure recrystallised fraction10.1016/S1359-6462(99)00051-2 ↗
22. Characterization of the carbides and the martensite phase in powder-metallurgy high-speed steel10.1016/j.matchar.2010.02.003 ↗
23. Quantitative phase analysis of martensite-bainite steel using EBSD and its microstructure, tensile and high-cycle fatigue behaviors10.1016/j.msea.2020.139375 ↗
24. Goldberg · 1968 · 61 · 41
25. Martin · 1998
26. Microstructural evolution, nanoprecipitation behavior and mechanical properties of selective laser melted high-performance grade 300 maraging steel10.1016/j.matdes.2017.08.026 ↗
27. Influence mechanism of parameters process and mechanical properties evolution mechanism of maraging steel 300 by selective laser melting10.1016/j.msea.2017.06.033 ↗
28. Aging behaviour and mechanical performance of 18-Ni 300 steel processed by selective laser melting10.3390/met6090218 ↗
29. Comparison of maraging steel micro- and nanostructure produced conventionally and by laser additive manufacturing10.3390/ma10010008 ↗
30. Epitaxy and microstructure evolution in metal additive manufacturing10.1146/annurev-matsci-070115-031728 ↗
31. Epitaxy and microstructure evolution in metal additive manufacturing10.1146/annurev-matsci-070115-031728 ↗
32. Hardened austenite steel with columnar sub-grain structure formed by laser melting10.1016/j.msea.2014.12.018 ↗
33. The microstructure and mechanical properties of 316L austenitic stainless steel prepared by forge and laser melting deposition10.1016/j.msea.2023.144820 ↗
34. Modeling of precipitation hardening during the aging and overaging of 18Ni-co-Mo-Ti maraging 300 steel10.1016/j.jallcom.2004.09.049 ↗
35. Effects of austenite reversion during overageing on the mechanical properties of 18 Ni (350) maraging steel10.1016/j.msea.2005.03.074 ↗