journal article·2018-01

TEM investigations on lath martensite substructure in quenched Fe-0.2C alloys

T.H. Man, T.W. Liu, D.H. Ping, T. Ohmura

Publisher page

Abstract

Abstract Lath martensite in low-carbon steels is the main microstructural feature in the quenched state, and dislocations have been generally recognized as the substructure of lath martensite. However, the effects of quenching conditions on the quenched substructure have not yet been fully understood. In the present work, a Fe-0.2C (wt%) alloy was selected for detailed investigations on the microstructural evolution at various austenitizing temperatures. Microstructural characterization was carried out by using a conventional transmission electron microscope (TEM). The substructure of lath martensite was found to vary with austenitizing temperature. In the 1200 °C-water-quenched (WQ) samples, twinned laths (two specific variants having a {112}〈111〉-type twin relationship) and a twinned region (laths with the twin structure as their substructure) can be observed. Almost all lath martensite with a high density of fine twins as its substructure can be obtained in the 1300 °C-WQ samples. The twins gradually disappear or detwinning-occurs during TEM observations carried out with in situ heating. A further increase in temperature results in the formation of twinned laths and then lath with dislocation-like contrasts or lines appears as the substructure. These results suggested that a completely twin structure can be the initial substructure of lath martensite, and lath with dislocation-like contrasts or lines as its substructure is most likely the auto-tempering result of twinning.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Recent advance in understanding martensite in steels
2. The morphology of martensite in Fe-C, Fe-Ni-C and Fe-Cr-C alloys10.1007/BF00700770 ↗
3. Porter · 2009
4. The role of carbon in the strength of ferrous martensite10.1016/0036-9748(70)90088-8 ↗
5. Revisiting the structure of martensite in iron-carbon steels10.2320/matertrans.MRA2007338 ↗
6. Effect of carbon on the volume fraction and lattice parameters of retained austenite and martensite
7. Tempering of steel10.1007/BF02642436 ↗
8. Microstructures and hardness of as-quenched martensites (0.1–0.5%C)
9. The morphology of martensite in iron alloys10.1007/BF02814873 ↗
10. The morphology and crystallography of ferrous lath martensite. Studies of Fe-20%Ni-5%Mn-II. Transmission electron microscopy10.1016/0001-6160(81)90052-3 ↗
11. The morphology and crystallography of lath martensite in Fe-C alloys10.1016/S1359-6454(02)00577-3 ↗
12. Effect of carbon content on variant pairing of martensite in Fe–C alloys10.1016/j.actamat.2012.09.046 ↗
13. 3D structural and atomic-scale analysis of lath martensite: effect of the transformation sequence10.1016/j.actamat.2015.05.023 ↗
14. Crystallographic features of lath martensite in low-carbon steel10.1016/j.actamat.2005.11.001 ↗
15. The distribution of intervariant crystallographic planes in a lath martensite using five macroscopic parameters10.1016/j.actamat.2013.10.010 ↗
16. Martensite in steel: strength and structure10.1016/S0921-5093(99)00288-9 ↗
17. Dislocation characteristics in lath martensitic steel by neutron diffraction10.1088/1742-6596/746/1/012046 ↗
18. Polymorphous γ→α transformation in iron of a high-level of purity
19. The effect of quench rate on the properties morphology of ferrous martensite10.1007/BF02646850 ↗
20. Structure-property relations and the design of Fe-4Cr-C base structural steels for high strength and toughness10.1007/BF02654568 ↗
21. Lath martensite in low carbon steels
22. The microstructure and kinetics of martensite transformations in splat-quenched Fe and Fe-Ni alloy-I. Pure Fe10.1016/0001-6160(82)90213-9 ↗
23. Twin structure of the lath martensite in low carbon steel10.1016/j.pnsc.2016.03.004 ↗
24. Microstructural evolution and carbides in quenched ultra-low carbon (Fe-C) alloys10.2355/isijinternational.ISIJINT-2016-624 ↗
25. The martensite transformation in carbon steels10.1098/rspa.1960.0210 ↗
26. The morphology of martensite
27. Factors determining twining in martensite10.1016/0001-6160(65)90060-X ↗
28. Internal twinning in ferrous martensites10.1016/0001-6160(64)90119-1 ↗
29. Structure and mechanical properties of Fe-Cr-C-Co steels10.1007/BF02811625 ↗
30. The effect of quench rate on the Ms temperature and the structure of an Fe-C and Fe-C-Ni steel
31. The effect of quench rate on the martensitic transformation in Fe-C alloys10.1007/BF02814881 ↗
32. Understanding solid-solid (fcc→ω+ bcc) transition at atomic scale10.1007/s40195-015-0283-z ↗