journal article·2024-10

Microstructural evolution and wear behavior of friction stir processed L12 strengthened AlFeCrCuNi-type high-entropy alloy

G.Q. Huang, T. Sun, F.Q. Meng, X.W. Jiang, T.H. Chou, J. Ju, J. Gan, T. Yang, M.S. Li, Z.K. Shen, W.T. Hou, Z.Y. Piao, S. Mironov, X.M. Feng, Y.F. Shen

Publisher page

Abstract

In this work, a newly-developed L1 2-type precipitation-strengthened Al 0.3FeCuCrNi 2 high-entropy alloy (HEA) was subjected to friction stir processing (FSP), and the microstructural evolution, as well as its effect on the surface properties (hardness and wear behavior) were studied in detail. The results showed that the FSP of Al 0.3FeCuCrNi 2 HEA leads to significant grain refinement through continuous dynamic recrystallization (CDRX), dissolution of the needle-like L1 2/Cu-rich precipitates, increase in the intragranular dislocation density, and re-precipitation of the Cu-rich phases at grain boundaries. The improved strength due to grain refinement and increased dislocation density outweighs the strength deterioration occasioned by the dissolution of the initial precipitates, along with a slight increment in the surface hardness from 215.3 ± 8.2 HV before FSP to 237.4 ± 12.7 HV after FSP. Also, the FSP-induced microstructures result in a shift in the wear mechanism from initial abrasive wear and slight oxidative wear to severe oxidative wear.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · Advanced materials and composites · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. High-entropy alloys10.1038/s41578-019-0121-4 ↗
2. Low neutron cross-section FeCrVTiNi based high-entropy alloys: design, additive manufacturing and characterization
3. Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys10.1126/science.aas8815 ↗
4. Unveiling the unique bifunctionality of L12-structured nanoprecipitates in a FeCoNiAlTi-type high-entropy alloy
5. L12-strengthened high-entropy alloys for advanced structural applications10.1557/jmr.2018.186 ↗
6. Nano-precipitates strengthened non- equiatomic medium-entropy alloy with outstanding tensile properties10.1016/j.msea.2020.139218 ↗
7. Enhancing strength-ductility synergy in a casting non-equiatomic NiCoCr-based high-entropy alloy by Al and Ti combination addition10.1016/j.scriptamat.2021.113898 ↗
8. Microstructure evolution and deformation mechanism of coherent L12-strengthened high-entropy alloy during sliding wear10.1016/j.compositesb.2023.110651 ↗
9. Simultaneous enhancement of strength and ductility via microband formation and nanotwinning in an L12-strengthened alloy10.1016/j.fmre.2022.05.024 ↗
10. A strong and ductile NiCoCr-based medium-entropy alloy strengthened by coherent nanoparticles with superb thermal-stability10.1016/j.jmst.2022.06.012 ↗
11. Thermal stability and deformation mechanisms in Ni-Co-Fe-Cr-Al-Ti-Nb-type nanoparticle-strengthened high-entropy alloys10.1016/j.jmst.2023.05.044 ↗
12. Designing structures with combined gradients of grain size and precipitation in high entropy alloys for simultaneous improvement of strength and ductility10.1016/j.actamat.2022.117847 ↗
13. Dual heterogeneous structures lead to ultrahigh strength and uniform ductility in a Co-Cr-Ni medium-entropy alloy10.1038/s41467-020-16085-z ↗
14. Outstanding tensile properties of a precipitation-strengthened FeCoNiCrTi0.2 high-entropy alloy at room and cryogenic temperatures10.1016/j.actamat.2018.11.049 ↗
15. Superior high-temperature properties and deformation-induced planar faults in a novel L12-strengthened high-entropy alloy10.1016/j.actamat.2020.02.028 ↗
16. High temperature oxidation behavior and mechanism of Al0.3CuCrFeNi2 high-entropy alloy with a coherent γ/γ' microstructure10.1016/j.corsci.2021.109984 ↗
17. Electron and laser-based additive manufacturing of Ni-based superalloys: a review of heterogeneities in microstructure and mechanical properties
18. Microstructure evolution and mechanical properties of a nickel-based superalloy repaired using wire and arc additive manufacturing10.1016/j.matchar.2022.112315 ↗
19. Friction stir welding/processing of metals and alloys: a comprehensive review on microstructural evolution10.1016/j.pmatsci.2020.100752 ↗
20. Microstructure and mechanical properties of friction stir welded Haynes 28210.1016/j.matchar.2021.111558 ↗
21. High strength and ductility achieved in friction stir processed Ni-co based superalloy with fine grains and nanotwins10.1016/j.jmst.2021.06.082 ↗
22. Dynamic recrystallization phenomena during laser-assisted friction stir processing of a precipitation hardened nickel base superalloy10.1016/j.jallcom.2016.06.209 ↗
23. Laser-assisted friction stir processing of IN738LC nickel-based superalloy: stir zone characteristics10.1080/13621718.2015.1119967 ↗
24. Insights into the microstructural evolution and wear behavior of underwater friction stir processed CoCrFeNiMn high-entropy alloy10.1016/j.matchar.2023.113362 ↗
25. Unveiling the microstructure evolution and mechanical properties of submerged friction stir welded joint of fine-grained NiCoCr medium entropy alloy10.1016/j.matchar.2023.112903 ↗
26. Friction stir welding of a сarbon-doped CoCrFeNiMn high-entropy alloy10.1016/j.matchar.2018.08.063 ↗
27. Weldability of high entropy alloys: microstructure, mechanical property, and corrosion resistance10.1016/j.jmapro.2023.05.049 ↗
28. Microstructure and mechanical property of gas tungsten arc and friction stir welds of L12 precipitate FCC high-entropy alloy10.1063/5.0117251 ↗
29. Phase stability and tensile properties of Co-free Al0.5CrCuFeNi2 high-entropy alloys10.1016/j.jallcom.2013.09.105 ↗
30. High-content ductile coherent nanoprecipitates achieve ultrastrong high-entropy alloys10.1038/s41467-018-06600-8 ↗
31. The role of annealing twins during recrystallization of Cu10.1016/j.actamat.2007.03.021 ↗
32. Adaptive characterization of recrystallization kinetics in IF steel by electron backscatter diffraction10.1111/jmi.12082 ↗
33. Effect of electric current on recrystallization kinetics in interstitial free steel and AZ31 magnesium alloy10.1016/j.matchar.2017.09.021 ↗
34. A new critical point on the stress-strain curve: delineation of dynamic recrystallization from grain growth10.1016/j.matdes.2016.12.053 ↗
35. A new grain orientation spread approach to analyze the dynamic recrystallization behavior of a cast-homogenized Mg-Zn-Zr alloy using electron backscattered diffraction10.1016/j.msea.2017.10.062 ↗
36. Boron doped ultrastrong and ductile high-entropy alloys10.1016/j.actamat.2018.04.004 ↗
37. Macroscopic to nanoscopic in situ investigation on yielding mechanisms in ultrafine grained medium Mn steels: role of the austenite-ferrite interface10.1016/j.actamat.2019.07.043 ↗
38. Deformation mode dependent mechanism and kinetics of dynamic recrystallization in hot working of titanium alloy10.1016/j.msea.2019.138804 ↗
39. Hot deformation and dynamic recrystallization in Al-Mg-Si alloy10.1016/j.matchar.2021.110976 ↗
40. Study of pre-precipitated δ phase promoting deformation twinning and recrystallization behavior of Inconel 718 superalloy during hot compression10.1016/j.matdes.2023.111693 ↗
41. Cu assisted stabilization and nucleation of L12 precipitates in Al0.3CuFeCrNi2 fcc-based high entropy alloy10.1016/j.actamat.2017.02.053 ↗
42. Microstructure evolution during FSW/FSP of high strength aluminum alloys10.1016/j.msea.2005.06.009 ↗
43. Clarification of microstructure evolution of aluminum during friction stir welding using liquid CO2 rapid cooling10.1016/j.matdes.2017.05.013 ↗
44. On the microstructures, phase assemblages and properties of Al0.5CoCrCuFeNiSix high-entropy alloys10.1016/j.jallcom.2014.11.085 ↗
45. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
46. Thermodynamic re-evaluation of the Cu-Ni system10.1016/0364-5916(92)90022-P ↗
47. Elucidating microstructural evolution and its effect on the mechanical properties of FSWed alumina-forming austenitic steel for power plant applications10.1016/j.matdes.2022.110484 ↗
48. Effect of stacking fault energy on the grain structure evolution of FCC metals during friction stir welding10.1007/s40195-020-01064-6 ↗
49. Effect of welding temperature on microstructure of friction-stir welded aluminum alloy 105010.1007/s11661-014-2651-0 ↗
50. Effect of stacking fault energy on the restoration mechanisms and mechanical properties of friction stir welded copper alloys10.1016/j.matdes.2018.11.050 ↗
51. Effects of Ta microalloying on the microstructure and mechanical properties of L12-strengthened CoCrFeNi–AlTi high-entropy alloys10.1016/j.msea.2023.145048 ↗
52. Dual effects of pre-strain on continuous and discontinuous precipitation of L12-strengthened high-entropy alloys10.1016/j.jallcom.2022.166730 ↗
53. Investigation on underwater friction stir processing of AZ-61 magnesium alloy
54. Investigation on microstructure, mechanical and tribological properties of friction stir processing of AZ31/AlFeCrMoNb surface composite
55. Worn surface and subsurface layer structure formation behavior on wear mechanism of CoCrFeMnNi high entropy alloy in different sliding conditions10.1016/j.apsusc.2021.149202 ↗
56. Strengthening the mechanical properties and wear resistance of CoCrFeMnNi high entropy alloy fabricated by powder metallurgy10.1016/j.apt.2022.103519 ↗
57. Effects of laser scanning rate and Ti content on Wear of novel Fe-Cr-B-Al-Ti coating prepared via laser cladding10.1007/s11666-022-01465-2 ↗