journal article·2022-09

Effect of electrostatic field on microstructure and mechanical properties of the 316L stainless steel modified layer fabricated by laser cladding

Wentai Ouyang, Zifa Xu, Yang Chao, Yufan Liu, Wensheng Luo, Junke Jiao, Liyuan Sheng, Wenwu Zhang

Publisher page

Abstract

In the present research, the laser cladding 316 L stainless steel layer with and without exerting electrostatic field were investigated. The microstructure and mechanical properties analyses reveal that the high solidification rate and specific convection result in the grain coarsening by stages and the crystal tends to grow paralleling with the laser scanning direction. Moreover, the rapid solidification also leads to the micro-segregation inside grain. The exerting of electrostatic field opposite to laser scanning direction promotes the elements diffusion and convection in the molten pool, which benefits the directional solidification of the laser cladding layer and produces the columnar grains. In addition, the accelerated diffusion eliminates the micro-segregation but induces the formation of stacking faults inside grains. The exerting of electrostatic field consistent with laser scanning direction restricts the elements diffusion and convection in the molten pool, which results in the ordered mushy solidification and ultrafine grain structure in whole cladding layer. Moreover, the existence of electrostatic field consistent with laser scanning direction promotes the micro-segregation and precipitation of small MC carbides. Compared with the laser cladding layer, the exerting of electrostatic field could decrease the porosity and improve the modulus and hardness of the laser cladding layer except the hardness of dendritic region. The interdendritic region in laser cladding layer with exerting of electrostatic field opposite to laser scanning direction obtains the highest modulus and hardness. © 2022 Elsevier Inc.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Fatigue properties of type 316LN stainless steel in air and mercury10.1016/j.jnucmat.2005.03.019 ↗
2. Corrosion performance of additively manufactured stainless steel parts: a review
3. Influence of grain boundary carbides on mechanical properties of high nitrogen austenitic stainless steel10.1016/j.matdes.2012.01.024 ↗
4. A case study on failure of AISI 347H stabilized stainless steel pipe in a petrochemical plant
5. Influence of hot working on microstructure and mechanical behavior of high nitrogen stainless steel10.1007/s10853-011-5439-2 ↗
6. Temperature evolution, phase ratio and corrosion resistance of duplex stainless steels treated by laser surface heat treatment10.1016/j.jmapro.2020.12.040 ↗
7. Investigation of microbial corrosion inhibition of Cu-bearing 316L stainless steel in the presence of acid producing bacterium Acidithiobacillus caldus SM-110.1016/j.jmst.2020.05.070 ↗
8. Effect of surface oxide properties on corrosion resistance of 316L stainless steel for biomedical applications10.1016/S0010-938X(03)00148-3 ↗
9. Annealing effect on Wear resistance of nanostructured 316L stainless steel subjected to dynamic plastic deformation10.1016/S1005-0302(12)60145-5 ↗
10. Microstructure formation and columnar to equiaxed transition during cold crucible directional solidification of a high-Nb TiAl alloy10.1016/j.jmrt.2021.02.052 ↗
11. Microstructural characterization and mechanical behavior of ultrasonic impact peened and laser shock peened AISI 316L stainless steel10.1016/j.surfcoat.2020.125403 ↗
12. Effects of laser shock peening on microstructure and fatigue behavior of Ti–6Al–4V alloy fabricated via electron beam melting10.1016/j.msea.2020.139199 ↗
13. Effect of laser shock peening on microstructural, mechanical and corrosion properties of laser beam welded commercially pure titanium10.1016/j.optlastec.2020.106527 ↗
14. Effect of transverse static magnetic field on radial microstructure of hypereutectic aluminum alloy during directional solidification10.1016/j.jmst.2020.11.025 ↗
15. Three dimensional dendritic morphology and orientation transition induced by high static magnetic field in directionally solidified Al-10wt.%Zn alloy10.1016/j.jmst.2019.03.029 ↗
16. Effect of permanent magnet stirring on solidification of Sn-Pb alloy10.1016/j.matdes.2016.07.006 ↗
17. Reducing porosity and optimizing performance for Al-Cu-based alloyswith large solidification intervals by coupling travelling magneticfields with sequential solidification10.1016/j.jmst.2020.11.035 ↗
18. Laser deposition of high-entropy alloys: a comprehensive review10.1016/j.optlastec.2021.107447 ↗
19. Effects of laser polishing on surface morphology and mechanical properties of additive manufactured TiAl components10.1016/j.jmapro.2021.03.014 ↗
20. Research and progress of laser cladding on engineering alloys: a review10.1016/j.jmapro.2021.03.061 ↗
21. Research on microstructure properties of the TiC/Ni-Fe-Al coating prepared by laser cladding technology
22. Laser cladding of Inconel 718 powder on a non-weldable substrate: clad bead geometry-solidification cracking relationship10.1016/j.jmapro.2020.04.045 ↗
23. Effect of magnetic field on crack control of co-based alloy laser cladding10.1016/j.optlastec.2021.107129 ↗
24. The effect of strong magnetic field treatment on microstructure and room temperature compressive properties of NiAl–Cr (Mo)–Hf eutectic alloy10.1016/j.msea.2008.09.020 ↗
25. Microstructure and wear resistance of electromagnetic field assisted multi-layer laser clad Fe901 coating10.1016/j.surfcoat.2020.125876 ↗
26. Microstructure, microhardness and corrosion resistance of NiCrBSi coatings under electromagnetic field auxiliary laser cladding10.1016/j.surfcoat.2018.11.034 ↗
27. Investigation on laser cladding Ni-base coating assisted by electromagnetic field10.1016/j.optlastec.2019.01.017 ↗
28. Control of microstructure and mechanical properties of laser solid formed Inconel 718 superalloy by electromagnetic stirring10.1016/j.optlastec.2017.09.022 ↗
29. A new method for preparing high entropy alloys: electromagnetic pulse treatment and its effects on mechanical and corrosion properties10.1016/j.msea.2020.138916 ↗
30. Effect of electric-magnetic compound field on the pore distribution in laser cladding process10.1016/j.optlastec.2018.06.037 ↗
31. Effect of magnetic field waveform on microstructure and properties of laser cladding
32. Multi-layer functional graded stainless steel fabricated by laser melting deposition10.1016/j.vacuum.2017.04.020 ↗
33. The redistribution of solute atoms during the solidification of metals10.1016/0001-6160(53)90126-6 ↗
34. In situ studies of liquid-liquid phase separation, solidification sequence and dendrite growth kinetics in electrostatically levitated Ti–Y alloys10.1016/j.actamat.2021.116962 ↗
35. Effects of electromagnetic compound field on the escape behavior of pores in molten pool during laser cladding10.1016/j.surfcoat.2019.125198 ↗
36. Improvement of material performance of Inconel 718 formed by high deposition-rate laser metal deposition10.1016/j.matdes.2016.03.006 ↗
37. Experimental characterization and micromechanical-statistical modeling of 316L stainless steel processed by selective laser melting10.1016/j.commatsci.2020.109595 ↗
38. Assessment of the microstructure and mechanical properties of a laser-joined carbon fiber-reinforced thermosetting plastic and stainless steel10.1007/s11223-018-0020-8 ↗
39. Effects of cooling rate on solidification cracking behavior in 310S stainless steel
40. Solidification and microstructure evolution in additively manufactured H13 steel via directed energy deposition: integrated experimental and computational approach10.1016/j.jmapro.2021.06.009 ↗
41. Effect of withdrawal rate on microstructure and mechanical properties of a directionally solidified NiAl-based hypoeutectic alloy doped with trace Hf and Ho10.1016/j.intermet.2010.08.013 ↗
42. Transition of solid-liquid interface and tensile properties of CoCrFeNi high-entropy alloys during directional solidification10.1016/j.jallcom.2019.02.050 ↗
43. Investigation on microstructure and mechanical properties of directional solidified DZ417G alloy with different proportion of recycling alloy10.4028/www.scientific.net/AMR.452-453.46 ↗
44. Mechanism of δ → δ + γ phase transformation and hardening behavior of duplex stainless steel via sub-rapid solidification process10.1016/j.matchar.2020.110679 ↗
45. Microstructure evolution and elevated temperature compressive properties of a rapidly solidified NiAl–Cr (Nb)/Dy alloy10.1016/j.matdes.2008.10.022 ↗
46. Optimizing the microstructures and mechanical properties of Al-Cu-based alloys with large solidification intervals by coupling travelling magnetic fields with sequential solidification10.1016/j.jmst.2020.05.048 ↗
47. Numerical and experimental study on electric field driven coalescence of binary falling droplets in oil10.1016/j.seppur.2016.12.015 ↗
48. Effects of annealing treatment on microstructure and tensile behavior of the Mg-Zn-Y-Nd alloy10.1016/j.jma.2019.07.011 ↗
49. Optimizing microstructure, shrinkage defects and mechanical performance of ZL205A alloys via coupling travelling magnetic fields with unidirectional solidification10.1016/j.jmst.2020.10.035 ↗
50. Strain-induced change in the elastically soft direction of epitaxially grown facecentered-cubic metals10.1063/1.120778 ↗
51. A study on crystal plasticity of face-centered cubic structures induced by deformation twinning10.1016/j.actamat.2020.07.040 ↗
52. The influence of stacking fault energy on plasticity mechanisms in triode-plasma nitrided austenitic stainless steels: implications for the structure and stability of nitrogen-expanded austenite10.1016/j.actamat.2018.10.019 ↗