Precipitation behavior of α phase during aging treatment in a β-quenched Ti-7333
Source abstract
Abstract
Abstract In this work, the precipitation behavior of α phase during the isothermal aging treatment was investigated in the β-quenched Ti-7333. The results indicate that dislocations contribute to the precipitation of α phase with a dot-like morphology at the beginning of aging treatment, and these dot-like α precipitates holding the same Burgers orientation relationship (BOR) with respect to the β matrix coalesce into the platelet morphology. The platelet-like α precipitates that orientate to different growth directions combine with each other to form the V-shaped configuration. And the formation of this configuration is closely related with the variant selection (VS) of α phase, which is resulted from the perfect accommodation of transformation strain within the β matrix. Meanwhile, it is found that low-angle grain boundaries (LAGBs) and high-angle grain boundaries (HAGBs) can be decorated by α phase during the aging treatment, and its precipitation degree significantly depends on the angle between the closely packed direction of αGB and the GB plane. The volume fraction of α phase increases with increasing aging time, and this increasing volume fraction eventually results in the increase in micro-hardness of the alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Candidate materials for high-strength fastener applications in both the aerospace and automotive industries10.1361/105994905X75466 ↗
2. Composite structure of α phase in metastable β Ti alloys induced by lattice strain during β to α phase transformation10.1016/j.actamat.2017.04.051 ↗
3. Influence of solution treatment on microstructure and mechanical properties of a near β titanium alloy Ti-733310.1016/j.matdes.2015.06.015 ↗
4. Microstructure and mechanical property correlation and property optimization of a near β titanium alloy Ti-733310.1016/j.jallcom.2016.04.303 ↗
5. Properties of TIMETAL 555 (Ti-5Al-5Mo-5V-3Cr-0.6 Fe)10.1361/105994905X75628 ↗
6. Development of α-phase morphologies during low temperature isothermal heat treatment of a Ti–5Al–5Mo–5V–3Cr alloy10.1016/j.msea.2010.09.061 ↗
7. Effect of hot rolling and heat treatment on microstructure and tensile properties of high strength beta titanium alloy sheets10.1016/j.msea.2015.02.030 ↗
8. Evolution of the secondary α phase morphologies during isothermal heat treatment in Ti-7333 alloy10.1016/j.jallcom.2013.06.180 ↗
9. Development of chevron-shaped α precipitates in Ti–5Al–5Mo–5V–3Cr10.1016/j.scriptamat.2008.12.010 ↗
10. Reasons for formation of triangular .ALPHA. Precipitates in Ti-15V-3Cr-3Sn-3Al .BETA. Titanium alloy10.2320/matertrans.47.341 ↗
11. Nucleation and variant selection of secondary α plates in a β Ti alloy10.1016/j.actamat.2008.08.016 ↗
12. Experimental assessment of variant selection rules for grain boundary α in titanium alloys10.1016/j.actamat.2015.09.021 ↗
13. Variant selection of grain boundary α by special prior β grain boundaries in titanium alloys10.1016/j.actamat.2014.05.003 ↗
14. Variant selection in grain boundary nucleation of upper bainite10.1007/s11661-008-9510-9 ↗
15. Characteristics of a hot-rolled near β titanium alloy Ti-733310.1016/j.matchar.2017.04.031 ↗
16. Precipitation of α phase and its morphological evolution during continuous heating in a near β titanium alloy Ti-733310.1016/j.matchar.2017.07.032 ↗
17. Development of alpha precipitates in metastable Ti-5Al-5Mo-5V-3Cr and similar alloys10.1016/j.matchar.2016.09.005 ↗
18. Porter · 1981
19. The invariant line and precipitation in a Ni-45 wt% Cr alloy10.1016/0001-6160(87)90025-3 ↗
20. Variant selection in heterogeneous nucleation on defects in diffusional phase transformation and precipitation10.1016/S0921-5093(00)01904-3 ↗
21. Aging response of coarse-and fine-grained β titanium alloys10.1016/j.msea.2005.06.027 ↗
22. The influence of partitioning on the growth of intragranular α in near-β Ti alloys10.1016/j.jallcom.2015.04.143 ↗
23. Effect of self-accommodation on α/α boundary populations in pure titanium10.1016/S1359-6454(03)00035-1 ↗
24. Determination of the orientation of a parent β grain from the orientations of the inherited α plates in the phase transformation from body-centred cubic to hexagonal close packed10.1107/S0021889895004067 ↗
25. On variant distribution and coarsening behavior of the α phase in a metastable β titanium alloy10.1016/j.actamat.2016.01.023 ↗
26. Influence of faceting upon the equilibrium shape of nuclei at grain boundaries—I. Two-dimensions10.1016/0001-6160(75)90196-0 ↗
27. Crystallography of grain boundary α precipitates in a β titanium alloy10.1007/BF02649821 ↗
28. A theoretical approach to grain boundary character distribution (GBCD) in textured polycrystalline materials