Interfacial microstructure and mechanical properties of tungsten alloy/steel diffusion bonding joint using CrFeCoNiCu high entropy alloy interlayer
Source abstract
Abstract
In this paper, an innovative design of CrFeCoNiCu high entropy alloy (HEA) interlayer was selected to produce high-strength diffusion bonding joints of 93W-4.9Ni-2.1Fe tungsten alloy (93W, wt%) and 30CrMnSiNi2A steel (steel, wt%). The microstructure evolution and mechanical properties of the joints bonded at different temperatures were investigated. At the 93W/HEA interface, a curved and continuous μ-Fe 7W 6 type layer with high-density stacking faults was found in the diffusion zone between W particles and HEA, whereas the diffusion zone between γ-(Ni, Fe) phase and HEA was dominated by solid solution, companied by some nano-μ phase precipitation. The sluggish diffusion effect of HEA effectively inhibited the formation and growth of μ layer, despite the fact that the thickness of μ layer increased with the increasing of bonding temperature. Meanwhile, rod-like Cr 7C 3 phase and nano-granular Cr 23C 6 phase were found in the matrix phase of HEA near the HEA/steel interface. These chromium carbides coarsened and decreased with the increasing of bonding temperature. The strength of the bonded specimens is as high as 592 MPa at the bonding temperature of 950 °C. This study provides a new design strategy of interlayer for producing high-performance tungsten alloy/steel composites.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Advanced materials and composites · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Interfacial structure and formation mechanism of tungsten/steel HIP diffusion bonding joints using Ni interlayer10.1016/j.jmapro.2020.02.001 ↗
2. Microstructural characteristics, mechanical properties and interfacial formation mechanism of tungsten alloy/steel composite structure fabricated by HIP co-sintering10.1016/j.matdes.2021.110127 ↗
3. Influence of Fe-W intermetallic compound on fracture behavior of Steel/Tungsten HIP diffusion bonding joint: experimental investigation and first-principles calculation10.1016/j.jmapro.2020.03.054 ↗
4. Interfacial microstructures, residual stress and mechanical analysis of hot isostatic pressing diffusion bonded joint of 93W–4.9Ni–2.1Fe alloy and 30CrMnSiNi2A steel10.1016/j.fusengdes.2020.111602 ↗
5. Effect of holding time on the microstructure and strength of tungsten/ferritic steel joints diffusion bonded with a nickel interlayer10.1016/j.msea.2009.04.043 ↗
6. Effect of Ti interlayer on the bonding quality of W and steel HIP joint10.1016/j.jnucmat.2016.12.024 ↗
7. Effect of holding time on the microstructure and strength of tungsten/steel joints by HIP diffusion bonded using a Cu interlayer10.1016/j.matlet.2019.126875 ↗
8. Influence of intermetallic compounds on the microstructure and strength properties of diffusion bonded W–steel joints using Ti/Ni composite interlayer10.1016/j.fusengdes.2018.05.027 ↗
9. Microstructural evolution and mechanical properties in the partial transient liquid phase diffusion bonding of tungsten to steel10.1016/j.ijrmhm.2018.02.002 ↗
10. Microstructure, residual stresses and mechanical properties of diffusion bonded tungsten–steel joint using a V/Cu composite barrier interlayer10.1016/j.ijrmhm.2014.09.002 ↗
11. High-entropy alloy: challenges and prospects10.1016/j.mattod.2015.11.026 ↗
12. High susceptibility to adiabatic shear banding and high dynamic strength in tungsten heavy alloys with a high-entropy alloy matrix10.1016/j.jallcom.2020.157796 ↗
13. Welding of high entropy alloys: progresses, challenges and perspectives10.1016/j.jmapro.2021.05.042 ↗
14. Vacuum diffusion bonding of TC4 titanium alloy to 316L stainless steel with AlCoCrCuNi2 high-entropy alloy interlayer10.1016/j.jallcom.2022.164698 ↗
15. Diffusion bonding of copper to titanium using CoCrFeMnNi high-entropy alloy interlayer10.1016/j.intermet.2020.107027 ↗
16. Microstructure and mechanical properties of novel tungsten heavy alloys prepared using FeNiCoCrCu HEA as binder10.1016/j.msea.2021.142451 ↗
17. Investigation of tungsten/steel brazing using Ta and Cu interlayer10.1016/j.fusengdes.2016.11.004 ↗
18. Rational design of composite interlayer for diffusion bonding of tungsten–steel joints10.1016/j.ijrmhm.2017.10.002 ↗
19. Precipitation and its strengthening of Cu-rich phase in CrMnFeCoNiCux high-entropy alloys10.1016/j.msea.2017.12.060 ↗
20. Enhancement of tensile properties applying phase separation with cu addition in gas tungsten arc welds of CoCrFeMnNi high entropy alloys10.1016/j.scriptamat.2022.114897 ↗
21. Boer · 1988
22. Microstructure and tensile strength of the bonded interfaces and parent materials in W/ODS steel joints fabricated by direct SSDB10.1007/s11661-021-06335-0 ↗
23. Investigation of tungsten/steel diffusion bonding with Ni–Fe cladding on tungsten substrate10.1016/j.fusengdes.2017.11.014 ↗
24. Investigation of tungsten/EUROFER97 diffusion bonding using Nb interlayer10.1016/j.fusengdes.2011.03.017 ↗
25. Diffusion bonding between W and EUROFER97 using V interlayer10.1016/j.jnucmat.2012.05.049 ↗
26. Process optimization for diffusion bonding of tungsten with EUROFER97 using a vanadium interlayer10.1016/j.jnucmat.2015.01.033 ↗
27. Interfacial microstructure and strengthening mechanism of W/steel diffusion bonding joint using a porous NiFeWss interlayer prepared by in-situ reduction10.1016/j.matlet.2021.131501 ↗
28. Microstructure and mechanical properties of diffusion bonded W/steel joint using V/Ni composite interlayer10.1016/j.matchar.2013.10.013 ↗
29. Stable bonding of W and ODS steel fabricated by TLP diffusion technology through inserting a novel composite interlayer Zr/cu10.1016/j.jmatprotec.2021.117341 ↗
30. Diffusion bonding of a Cu–Cr–Zr alloy to stainless steel and tungsten using nickel as an interlayer10.1016/j.msea.2003.10.296 ↗
31. Thermodynamic analysis of the W-Co-Cr system supported by ab initio calculations and verified with quaternary data10.1016/j.calphad.2015.04.012 ↗
32. Thermodynamic modelling of the σ and μ phases in several ternary systems containing Co, Cr, Fe, Mo, Re and W10.1016/j.jallcom.2020.156122 ↗
33. Room temperature deformation in the Fe7Mo6 mu-phase10.1016/j.ijplas.2018.05.002 ↗
34. In situ TEM investigation on the precipitation behavior of μ phase in Ni-base single crystal superalloys10.1016/j.actamat.2016.03.046 ↗
35. Effect of alloying elements on the stacking fault energy and ductility in Mg2Si intermetallic compounds10.1021/acsomega.1c02099 ↗
36. Mapping the relationship among composition, stacking fault energy and ductility in Nb alloys: a first-principles study10.1016/j.actamat.2017.11.029 ↗
37. Diffusion bonding W and RAFM-steel with an Fe interlayer by hot isostatic pressing10.1016/j.fusengdes.2020.111796 ↗
38. Wavy microstructure for improvement of bonding strength in titanium to carbon steel brazed joints10.1016/j.jmatprotec.2022.117572 ↗
39. Design for quality explosive welding10.1016/0924-0136(92)90200-C ↗
40. In situ synchrotron X-ray imaging and mechanical properties characterization of additively manufactured high-entropy alloy composites10.1016/j.jallcom.2021.159505 ↗
41. Microstructure and mechanical properties of CoCrFeNiWx high entropy alloys reinforced by μ phase particles10.1016/j.jallcom.2020.155997 ↗
42. Microstructural evolution, mechanical properties and corrosion resistance of CoCrFeNiW0.5 high entropy alloys with various annealing heat treatment10.1016/j.jallcom.2022.165602 ↗
43. Interface microstructure and diffusion kinetics in diffusion bonded Mg/Al joint10.1007/s11144-008-5259-9 ↗
44. Interdiffusion study on Co(W) solid solution and topological close-packed μ phase in Co–W system10.1016/j.intermet.2010.10.018 ↗
45. Interdiffusion study of the topologically closed packed μ phase and the phase boundary compositions in the Fe–Mo system10.1016/j.intermet.2019.106586 ↗
46. Topological close packed μ phase formation and the determination of diffusion parameters in the Co–Mo system10.1016/j.intermet.2009.07.019 ↗
47. Experimental and numerical studies on the sluggish diffusion in face centered cubic Co-Cr-Cu-Fe-Ni high-entropy alloys10.1016/j.jmst.2018.02.003 ↗
48. Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys10.1016/j.actamat.2013.04.058 ↗
49. Microstructural/mechanical characterizations of electron beam welded IN738LC joint after post-weld heat treatment10.1016/j.jmrt.2022.01.053 ↗
50. Precipitation behavior of carbides in a low-carbon NiCoFeCr high-entropy alloy at 800 °C10.1016/j.matlet.2021.130020 ↗
51. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
52. Effect of solid carburization on the surface microstructure and mechanical properties of the equiatomic CoCrFeNi high-entropy alloy10.1016/j.jallcom.2018.07.329 ↗
53. Ultrastrong and ductile transient liquid phase (TLP) bonding joints reinforced by ordered multi-precipitates10.1016/j.compositesb.2021.109568 ↗