Enhanced mechanical properties and corrosion resistance of rolled Mg-1.5Sn-0.5Ca alloy by Ce microalloying
Source abstract
Abstract
Abstract The aim of this study is to investigate the effect of minor cerium (Ce) on the microstructure, mechanical properties, and corrosion behavior of rolled Mg-1.5Sn-0.5Ca alloy. The results show that there are mainly α-Mg and CaMgSn phases and the rod-like CaMgSn phase broken is uniformly distributed in the Mg matrix in the form of particles after rolling. The addition of minor Ce can refine the eutectic structure between CaMgSn and α-Mg phase. Meanwhile, the minor Ce improves the strength and ductility of the rolled Mg-1.5Sn-0.5Ca alloy due to the more uniform microstructure and finer grain in the alloy. The fracture morphologies of the alloys are mainly ductile fractures. It is found that the Ce-containing Mg-1.5Sn-0.5Ca alloy has finer homogeneous dimples. In addition, the Ce addition improves the corrosion resistance of the alloy. The corrosion products are mainly Mg(OH)2 and a small amount of Ce oxide/hydroxide. These Ce oxide/hydroxide can fill the holes in the Mg(OH)2 film, made a denser protective film formed. The dense corrosion product film inhibits the penetration of Cl− and decreases the active sites caused by the second-phase particles on the surface of the alloy, so the corrosion rate is reduced in the Mg-1.5Sn-0.5Ca-0.1Ce alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Recent advances on the development of magnesium alloys for biodegradable implants10.1016/j.actbio.2014.07.005 ↗
2. Bidegradable metals10.1016/j.mser.2014.01.001 ↗
3. Microstructure evolution and texture tailoring of reduced graphene oxide reinforced Zn scaffold
4. Mechanical properties of magnesium alloys for medical application: a review10.1016/j.jmbbm.2018.07.022 ↗
5. Corrosion behaviour in salt spray and in 3.5% NaCl solution saturated with Mg(OH)2 of as-cast and solution heat-treated binary Mg-X alloys: X=Mn, Sn, Ca, Zn, Al, Zr, Si, Sr10.1016/j.corsci.2013.06.030 ↗
6. Structure, mechanical properties, corrosion behavior and cytotoxicity of biodegradable Mg-X (X= Sn, Ga, In) alloys10.1016/j.msec.2013.02.005 ↗
7. Preparation and characterization of as-extruded Mg-Sn alloys for orthopedic applications10.1016/j.matdes.2014.12.041 ↗
8. The corrosion of solid solution Mg-Sn binary alloys in NaCl solutions10.1016/j.electacta.2018.11.118 ↗
9. In vitro corrosion and biocompatibility of binary magnesium alloys10.1016/j.biomaterials.2008.10.021 ↗
10. Role of Sn in corrosion and passive behavior of extruded Mg-5 wt%Sn alloy10.1016/j.corsci.2015.10.028 ↗
11. Influences of the quantity of Mg2Sn phase on the corrosion behavior of Mg-7Sn magnesium alloy10.1016/j.electacta.2010.12.030 ↗
12. Effects of second phases on microstructure, microhardness, and corrosion behavior of Mg-3Sn-(1Ca) alloys10.3390/ma12162515 ↗
13. Influences of metallurgical factors on the corrosion behaviour of extruded binary Mg-Sn alloys10.1016/j.corsci.2014.01.035 ↗
14. The microstructure, mechanical properties and degradation behavior of laser-melted Mg-Sn alloys10.1016/j.jallcom.2016.06.068 ↗
15. Mechanical and degradation property improvement in a biocompatible Mg-Ca-Sr alloy by thermomechanical processing10.1016/j.jmbbm.2018.02.001 ↗
16. On the dynamic mechanical property and deformation mechanism of as-extruded Mg-Sn-Ca alloys under tension10.1016/j.msea.2016.03.125 ↗
17. Effects of Sn, Ca additions on thermal conductivity of Mg matrix alloys10.1179/1743284715Y.0000000128 ↗
18. Microstructure, mechanical and bio-corrosion properties of as-extruded Mg-Sn-Ca alloys10.1016/S1003-6326(16)64232-2 ↗
19. Influence of minor Ce additions on the microstructure and mechanical properties of Mg-1.0Sn-0.6Ca alloy10.1016/j.jmst.2019.07.036 ↗
20. Enhanced corrosion resistance of Mg-Sn-Zn-Al alloy by Y microalloying10.1016/j.scriptamat.2019.01.015 ↗
21. Effects of minor RE (Y, La) on microstructure and corrosion behavior of TX31 alloys10.1016/j.jmrt.2021.06.050 ↗
22. Microstructure, mechanical and corrosion properties of novel Mg-Sn-Ce alloys produced by high pressure die casting10.1016/j.msec.2019.110064 ↗
23. Effects of cerium on as-cast microstructure and mechanical properties of Mg-3Sn-2Ca magnesium alloy10.1016/j.msea.2009.02.038 ↗
24. Effects of little Ce addition on as-cast microstructure and creep properties of Mg-3Sn-2Ca magnesium alloy10.1016/S1003-6326(08)60411-2 ↗
25. The microstructure, mechanical properties and corrosion behavior of Ce-containing Mg-3Sn-1Ca alloy10.1080/02670836.2019.1597486 ↗
26. Tensile properties of hot rolled Mg–3Sn–1Ca alloy sheets at elevated temperatures10.1016/j.matdes.2011.03.051 ↗
27. Phase equilibria, thermodynamics and solidification microstructures of Mg-Sn-Ca alloys, part 1: experimental investigation and thermodynamic modeling of the ternary Mg-Sn-Ca system10.1016/j.intermet.2007.10.010 ↗
28. Misorientation and mechanical anisotropy in a deformed dual phase stainless steel weld joint10.1016/j.msea.2013.03.018 ↗
29. Texture, local misorientation, grain boundary and recrystallization fraction in pipeline steels related to hydrogen induced cracking10.1016/j.msea.2014.10.009 ↗
30. Physics and phenomenology of strain hardening: the FCC case10.1016/S0079-6425(02)00003-8 ↗
31. Strain hardening of as-extruded Mg-xZn (x=1, 2, 3 and 4 wt%) alloys10.1016/j.jmst.2018.09.015 ↗
32. Effect of Sn content on strain hardening behavior of as-extruded Mg-Sn alloys10.1016/j.msea.2017.12.074 ↗
33. Effect of Sc addition on the work-hardening behavior of ZK60 magnesium alloy10.1016/j.matdes.2012.07.050 ↗
34. Strain hardening behavior of a friction stir welded magnesium alloy10.1016/j.scriptamat.2007.08.001 ↗
35. Effects of trace Ca/Sn addition on corrosion behaviors of biodegradable Mg-4Zn-0.2Mn alloy10.1016/j.jma.2018.01.004 ↗
36. Corrosion behavior of Mg-6Bi-2Sn alloy in the simulated body fluid solution: the influence of microstructural characteristics10.1016/j.jallcom.2017.10.073 ↗
37. Effects of coverage layer on the electrochemical corrosion behaviour of Mg-Al-Mn alloy subjected to massive laser shock peening treatment10.1016/j.jallcom.2018.12.224 ↗
38. Robust corrosion resistance and self-healing characteristics of a novel Ce/Mn conversion coatings on EV31 magnesium alloys10.1016/j.apsusc.2020.145385 ↗