journal article·2014-09

Effects of rare earth yttrium on microstructure and properties of Ni–16Mo–7Cr–4Fe nickel-based superalloy

X.L. Li, S.M. He, X.T. Zhou, Y. Zou, Z.J. Li, A.G. Li, X.H. Yu

Publisher page

Abstract

Effects of rare earth yttrium on microstructure of Ni-16Mo-7Cr-4Fe alloy were examined by optical microscopy, scanning electron microscopy, transmission electron microscopy and X-ray fluorescence. M6C phase was observed in the alloys with and without yttrium addition, and Ni17Y2 phase existed in the alloys containing 0.05-0.43 wt.% yttrium simultaneously. The amount of Ni17Y2 phase increased as yttrium concentration increased. When the concentration of yttrium increased to 0.43 wt.%, some multi-precipitated phase regions appeared in the form of large amount of coarse Ni3Y phase surrounded by M6C phase and gamma phase in the alloy. Influences of rare earth yttrium on high temperature static oxidation and mechanical properties of Ni-16Mo-7Cr-4Fe alloy were also investigated. The alloy containing 0.05 wt.% yttrium showed the best oxidation resistance and mechanical properties simultaneously. The adequate concentration of yttrium at grain boundary and in the solid-solution (gamma phase) and the adhesion enhancement of the outer oxidation scale to the substrate are key factors for the improvements in the mechanical properties and oxidation resistance respectively. (C) 2014 Elsevier Inc. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. 1973 · 37830
2. Donachine · 2002 · 14 · 211
3. Benefits of minor additions of yttrium to the oxidation and creep-behavior of a nickel-based composite10.1098/rsta.1980.0126 ↗
4. Reaction of yttrium with para-nitrochlorophosphonazo and the spectrophotometric determination of yttrium in nickel-base alloys in the presence of cerium sub-group rare-earth10.1039/an9851001245 ↗
5. Creep strength of yttrium doped 4(th) generation Ni-base single crystal superalloy10.2320/jinstmet.70.380 ↗
6. The influence of yttrium additions on the oxidation resistance of a directionally solidified Ni–Al–Cr3C2 eutectic alloy10.1007/BF00603990 ↗
7. Determination of yttrium in complex nickel-base alloys using microwave dissolution and inductively coupled plasma optical-emission spectrometry10.1021/ac00173a013 ↗
8. Effect of yttrium on diffusion layer of Ni–Al–Mo–B alloy IC6 during high temperature oxidation process10.1016/S1359-6462(99)00277-8 ↗
9. Influence of Y on stress rupture property of a Ni-based superalloy10.1016/j.msea.2012.04.117 ↗
10. Role of yttrium in the microstructure and mechanical properties of a boron-modified nickel-based superalloy10.1016/j.scriptamat.2007.06.003 ↗
11. Surface modification of hard alloy by Y ion implantation under different atmosphere10.1016/j.apsusc.2011.01.113 ↗
12. Laser beam weld-metal microstructure in a yttrium modified directionally solidified Ni3Al-base alloy10.1016/j.intermet.2007.05.008 ↗
13. Cyclic oxidation and hot corrosion behavior of Y/Cr-modified aluminide coatings prepared by a hybrid slurry/pack cementation process10.1007/s11085-010-9228-0 ↗
14. Pt-modified Ni aluminides, MCrAlY-base multilayer coatings and TBC systems fabricated by spark plasma sintering for the protection of Ni-base superalloys10.1016/j.surfcoat.2009.09.054 ↗
15. Structure of NiCrAlY coatings deposited on single-crystal alloy turbine blade material by laser cladding10.1016/j.actamat.2009.06.049 ↗
16. Rare earth elements modification of laser-clad nickel-based alloy coatings10.1016/S0169-4332(01)00017-4 ↗
17. Yttrium addition to heat-resistant cast stainless steel10.1016/j.scriptamat.2006.01.024 ↗
18. Relation between selective oxidation and diffusional phenomena in Fe–Ni–Cr ternary alloys — effect of yttrium additions10.1016/0001-6160(80)90085-1 ↗
19. Improvement of the oxidation resistance of Tribaloy T-800 alloy by the additions of yttrium and aluminium10.1016/j.corsci.2010.11.038 ↗
20. Observations of reactive element gettering of sulfur in thermally grown oxide pegs10.1016/j.scriptamat.2006.06.017 ↗
21. Addition of yttrium, cerium and hafnium to combat the deleterious effect of sulfur impurity during oxidation of an Ni–Cr–Al alloy10.1016/0921-5093(89)90738-7 ↗
22. Direct observation of the interaction of yttrium and sulfur in oxidized NiAl10.1016/1359-6462(95)00662-1 ↗
23. Effect of silicon on microstructure and stress rupture properties at 1100 degrees C of yttrium modified Ni–Al–Mo–B alloy IC610.1023/A:1004848528582 ↗
24. Effect of rare earth on the microstructures and properties of a low expansion superalloy10.1016/S0925-8388(00)00862-8 ↗