Properties and hardening behavior of equal channel angular extrusion processed Mg-Al binary alloys
Source abstract
Abstract
We examined the competition between precipitation and grain-size refinement during equal channel angular extrusion (ECAE) of two fully solutionized coarse-grained Mg-Al alloys which was accomplished by using a “step-down” temperature method, up to 4 passes using the BC route. The extrudates show various levels of microstructural heterogeneity, especially at lower processing temperatures. Grain size refinement from hundreds of micrometers to a few micrometers was achieved by dynamic recrystallization (DRX). This is in conjunction with the formation of precipitates with a bimodal size distribution. One type is a few micrometers and found at grain boundaries, while the other precipitate type is a few hundred nanometers and found inside large parent grain remnants (PGR). The non-uniformity of the microstructure indicates that the ECAE deformation process is highly inhomogeneous. However, the presence of both fine grains and PGRs renders the extrudate with a higher capacity for actual strain hardening rate (ASHR: dσ/dε ) comparable to that of the as-received materials. Dynamic compressive test results show a significant strength increase attributed to the precipitates, which is in addition to the strength improvement from grain size refinement (Hall-Petch Effect). These features validate the utility of ECAE for high-strength Mg alloy engineering. The work herein also provides microstructural insights to the severe plastic deformation (SPD) processing of Mg-Al alloys as well as a wealth of experimental data for the development of numerical models.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Microstructure and mechanical properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Advanced metals for aerospace and automotive use10.1016/0921-5093(94)91026-X ↗
2. Mouritz · 2012
3. Corrosion of mg alloy AZ91D in the presence of living cells10.1002/jbm.b.31896 ↗
4. Effect of KOH concentration on the electrochemical behavior of coatings formed by pulsed DC micro-arc oxidation (MAO) on AZ31B Mg alloy10.1016/j.jallcom.2015.11.169 ↗
5. Jones · 2007
6. Texture evolution and recrystallization mechanism in a Mg–3Al–1Zn alloy under ballistic impact10.1016/j.jallcom.2019.152599 ↗
7. Dynamic precipitation and recrystallization in Mg-9wt.%Al during equal-channel angular extrusion: a comparative study to conventional aging10.1016/j.actamat.2019.04.046 ↗
8. Dynamic precipitation in a binary Mg-Al alloy during equal channel angular extrusion (ECAE)10.1017/S1431927618011595 ↗
9. Materials processing by simple shear10.1016/0921-5093(95)09705-8 ↗
10. Principles of equal-channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
11. Compressive responses of ultrafine-grained titanium within a broad range of strain rates and temperatures10.1016/j.mechmat.2017.07.015 ↗
12. Extreme grain refinement by severe plastic deformation: a wealth of challenging science10.1016/j.actamat.2012.10.038 ↗
13. Recrystallization mechanisms, grain refinement, and texture evolution during ECAE processing of mg and its alloys10.1016/j.mechmat.2021.104067 ↗
14. Microstructural characterization of pure Mg and AZ31B processed by ECAE10.1016/j.matchar.2019.109950 ↗
15. A comparative study on the microstructure and mechanical behavior of titanium: ultrafine grain vs. coarse grain10.1016/j.msea.2016.05.093 ↗
16. Non-conventional hot rolling for improvement of mechanical properties in binary Mg-alloys10.1016/j.mechmat.2021.104111 ↗
17. Improvement of strength of magnesium alloy processed by equal channel angular extrusion10.1016/j.scriptamat.2008.07.007 ↗
18. Mechanical properties of magnesium alloy AZ31 after severe plastic deformation10.2320/matertrans.ME200705 ↗
19. Slip, twinning, and fracture in hexagonal close-packed metals10.1007/BF02648537 ↗
20. Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B10.1016/j.ijplas.2004.05.018 ↗
21. Nonbasal deformation modes of HCP metals and alloys: role of dislocation source and mobility
22. The effect of strain rate on the mechanisms of plastic flow and failure of an ECAE AZ31B magnesium alloy10.1007/s10853-019-03838-5 ↗
23. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
24. Current issues in recrystallization: a review10.1016/S0921-5093(97)00424-3 ↗
25. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
26. Twinning and the ductility of magnesium alloys: Part I. “Tension” twins10.1016/j.msea.2006.12.037 ↗
27. Twinning and the ductility of magnesium alloys: Part II. “Contraction” twins10.1016/j.msea.2007.02.109 ↗
28. The Al-Mg (Aluminum-Magnesium) system10.1007/BF02873413 ↗
29. Age hardening in a Mg-9 wt.% Al alloy10.1016/0001-6160(68)90109-0 ↗
30. Precipitation and hardening in magnesium alloys10.1007/s11661-012-1217-2 ↗
31. Microhardness and microstructure characteristics of AZ91 magnesium alloy under different cooling rate conditions
32. Inhomogeneous evolution of microstructure in AZ91 Mg-alloy during high temperature equal channel angular pressing10.1016/j.jallcom.2009.11.150 ↗
33. Dynamic microstructural changes in Mg–9Al–1Zn alloy during hot compression10.1016/j.scriptamat.2009.03.051 ↗
34. Mechanical response and texture evolution of AZ31 alloy at large strains for different strain rates and temperatures10.1016/j.ijplas.2010.08.009 ↗
35. Improving the mechanical properties of magnesium and a magnesium alloy through severe plastic deformation10.1016/S0921-5093(00)01660-9 ↗
36. Nanomechanics of Hall–Petch relationship in nanocrystalline materials10.1016/j.pmatsci.2009.03.008 ↗
37. Highly localized shear deformation in a Mg–Al–Mn alloy subjected to ballistic impact10.1016/j.vacuum.2019.108868 ↗
38. Characterization of spalled AZ31B processed by ECAE10.1016/j.msea.2019.138298 ↗
39. Spall strength in alloyed magnesium: a compendium of research efforts from the cmede 10-year effort10.1016/j.mechmat.2021.104065 ↗
40. K. T. Ramesh, High Rates and Impact Experiments, Springer US, Boston, MA, pp. 929–960.10.1007/978-0-387-30877-7_33 ↗
41. Xu
42. Strengthening magnesium by design: integrating alloying and dynamic processing10.1016/j.mechmat.2021.104203 ↗
43. Grain size and microhardness evolution during annealing of a magnesium alloy processed by high-pressure torsion10.1016/j.jmrt.2014.10.008 ↗
44. MATLAB
45. Thermal conductivity of magnesium alloys in the temperature range from −125 °c to 400 °c10.1007/s10765-011-1145-1 ↗
46. Plastic work to heat conversion during high-strain rate deformation of Mg and Mg alloy10.1007/s11661-016-3825-8 ↗
47. Christian · 2002
48. Combined reactions10.1007/BF02811643 ↗
49. Effect of test temperature on flow behavior and strain hardening of magnesium under high strain rate deformation conditions10.1016/j.msea.2019.138546 ↗
50. Influence of grain size on the compressive deformation of wrought Mg–3Al–1Zn10.1016/j.actamat.2004.07.015 ↗
51. Influence of the magnesium concentration on the relationship between fracture mechanism and strain rate in high purity Al-Mg alloys10.1016/0921-5093(94)90974-1 ↗
52. Strengthening mechanisms in an Al–Mg alloy10.1016/j.msea.2009.11.056 ↗
53. Modeling the precipitation processes and strengthening mechanisms in a Mg-Al-(Zn) AZ91 alloy10.1007/s11661-005-0330-x ↗
54. Microstructure and mechanical properties of magnesium containing high volume fractions of yttria dispersoids10.1016/S0921-5093(99)00074-X ↗
55. The elastic modulus of cast Mg–Al–Zn alloys10.1016/S1471-5317(02)00013-5 ↗
56. Dislocation creep behavior in Mg–Al–Zn alloys10.1016/j.msea.2005.06.059 ↗
57. Mechanical properties of magnesium alloy AZ31 after severe plastic deformation10.2320/matertrans.ME200705 ↗
58. Adaptive thresholding using the integral image10.1080/2151237X.2007.10129236 ↗
59. Topographic distance and watershed lines