journal article·2022-08Open access

Mechanism of chlorine-induced stress corrosion cracking of two 304 SS heats in simulated marine environment through in situ X-ray tomography and diffraction: Role of deformation induced martensite and crack branching

Ryan Schoell, Li Xi, Yuchen Zhao, Xin Wu, Yu Hong, Zhenzhen Yu, Peter Kenesei, Jonathan Almer, Zeev Shayer, Djamel Kaoumi

Abstract

In-situ synchrotron x-ray tomography and diffraction experiments were conducted on two heats of 304SS undergoing chlorine-induced stress-corrosion-cracking (CISCC) in a simulated marine environment. The role of deformation induced martensite on CISCC was investigated through diffraction analysis where no significant amount of martensite was found to form during CISCC, indicating that it may not play a significant role in affecting the process. Tomography combined with stress-intensity analysis revealed the influence of stress-intensity on branching types with single crack growth, micro-branching, and macro-branching. Post experimental electron microscopy characterization revealed the presence of FeCl 2, CrCl 2, and NiCl 2·6H 2O compounds at the crack, which infers a dissolution mechanism during the experiment. A dissolution mechanism highlighting the synergy between stress and corrosion was proposed to explain chlorine-induced stress-corrosion-cracking and crack branching.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Raymond · 2015
2. Toward understanding the effects of strain and chloride deposition density on atmospheric chloride-induced stress corrosion cracking of type 304 austenitic stainless steel under MgCl^sub 2^ and FeCl^sub 3^:MgCl^sub 2^ droplets10.5006/3026 ↗
3. Low-temperature stress corrosion cracking of stainless steels in the atmosphere in the presence of chloride deposits10.5006/1.3319115 ↗
4. Jones · 2017
5. Low-temperature stress corrosion cracking of austenitic and duplex stainless steels under chloride deposits10.5006/1242 ↗
6. U.S. NRC · 2019
7. In situ synchrotron X-ray tomography of 304 stainless steels undergoing chlorine-induced stress corrosion cracking
8. Mechanical degradation of cold-worked 304 stainless steel in salt spray environments10.1016/j.jnucmat.2011.12.008 ↗
9. He · 2014
10. Atmospheric stress corrosion cracking of stainless steel rock climbing anchors, part 110.5006/3227 ↗
11. Detecting and imaging stress corrosion cracking in stainless steel, with application to inspecting storage canisters for spent nuclear fuel10.1016/j.ndteint.2019.102180 ↗
12. Chloride-induced stress corrosion cracking of used nuclear fuel welded stainless steel canisters: a review10.1016/j.jnucmat.2015.07.043 ↗
13. Raj · 2002
14. Stress corrosion cracking of type aisi 304 stainless steel at room temperature; influence of chloride content and acidity10.1016/0010-938X(80)90071-2 ↗
15. Willmott · 2019
16. Fracture mechanics by three-dimensional crack-tip synchrotron X-ray microscopy10.1098/rsta.2013.0157 ↗
17. The imaging of failure in structural materials by synchrotron radiation X-ray microtomography10.1016/j.engfracmech.2017.07.027 ↗
18. Understanding fatigue crack growth in aluminum alloys by in situ X-ray synchrotron tomography10.1016/j.ijfatigue.2012.06.009 ↗
19. Observations of intergranular stress corrosion cracking in a grain-mapped polycrystal10.1126/science.1156211 ↗
20. Bolivar · 2019 · 161
21. Direct observation of crack opening as a function of applied load in the interior of a notched tensile sample of Al Li 209010.1016/S1359-6454(96)00311-4 ↗
22. X-ray computed tomography
23. Stock · 2019
24. Baruchel · 2000
25. Crack growth characterization in single-edge notched tension testing by means of direct current potential drop measurement10.1016/j.ijpvp.2017.06.009 ↗
26. An efficient and accurate numerical method of stress intensity factors calculation of a branched crack10.1115/1.1796449 ↗
27. SCC growth behaviors of austenitic stainless steels in simulated PWR primary water10.1016/j.jnucmat.2012.03.013 ↗
28. The role of crack branching in stress corrosion cracking of aluminium alloys10.1515/corrrev-2015-0050 ↗
29. Deformation induced martensitic transformation in 304 austenitic stainless steel: in-situ vs. ex-situ transmission electron microscopy characterization10.1016/j.msea.2017.12.036 ↗
30. Effects of relative humidity on atmospheric stress corrosion cracking of stainless steels10.3323/jcorr1974.35.10_559 ↗
31. A. International · 2003
32. Single edge-crack stress intensity factor solutions10.1016/j.engfracmech.2005.09.003 ↗
33. Numerical simulation of temperature field and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurements10.1016/j.commatsci.2005.07.007 ↗
34. Wu · 2017
35. The role of crack branching in stress corrosion cracking of aluminium alloys, in10.1515/corrrev-2015-0050 ↗
36. Effect of delta ferrite on microstructure and mechanical properties of high-chromium martensitic steel10.1007/s11665-019-3862-8 ↗
37. Fracture mechanics by three-dimensional crack-tip synchrotron X-ray microscopy10.1098/rsta.2013.0157 ↗
38. Cyclic strain rate effect on martensitic transformation and fatigue behaviour of an austenitic stainless steel10.1111/ffe.12627 ↗
39. Relation between martensite morphology and volume change accompanying fcc to bcc martensitic transformation in Fe–Ni–co alloys10.1016/j.msea.2005.12.044 ↗
40. Fracture behavior of Ce-TZP/alumina/aluminate composites with different amounts of transformation toughening. Influence of the testing methods10.1016/j.jeurceramsoc.2017.09.052 ↗
41. Bathias · 2010 · 2010
42. Fracture toughness of type 304 and 316 stainless steels and their welds10.1179/imr.1997.42.2.45 ↗
43. Schijve · 2009 · c2009
44. Crack branching during stress corrosion cracking of high-strength materials, soviet materials science: a transl. of Fiziko-khimicheskaya mekhanika materialov / Academy of Sciences of the
45. Accelerated crack growth experiments of SS304H for dry storage canister in substitute ocean water – effect of temperature
46. Effect of chloride concentration on the corrosion–fatigue crack behavior of an age-hardenable martensitic stainless steel10.1016/j.ijfatigue.2016.05.022 ↗
47. Effect of chloride and sulfate additions on corrosion of low alloy steel in high-temperature water10.1016/j.electacta.2015.05.137 ↗
48. Effect of carbonate and chloride ions on the corrosion susceptibility of pipeline steel samples artificially aged10.20964/2018.02.53 ↗