Fabrication of high-strength Mg-Gd-Zn-Zr alloy via selective laser melting
Source abstract
Abstract
Abstract A Mg-11.00Gd-1.77Zn-0.43Zr (wt.%) alloy named GZ112K was prepared by selective laser melting (SLM) with different processing parameters. The formability, element vaporization, microstructure and tensile properties of the SLMed samples at different scanning speed and hatch spacing were characterized. The process map at a constant laser power of 80 W for the alloy has been established. It shows that the optimum scanning speed and hatch spacing are 300–700 mm/s and 100 μm respectively. The SLMed samples have fine grains of about 2 μm and dispersed eutectic phase of β-(Mg,Zn)3Gd due to the very high cooling rate, high solid solubility of Gd and Zn elements in ɑ-Mg matrix owing to the effect of solute trapping. The SLMed GZ112K alloy with scanning speed of 300 mm/s and hatch spacing of 100 μm has yield strength (YS) of 325 MPa, ultimate tensile strength (UTS) of 332 MPa and elongation of 4.0% at room temperature. Compared with as-cast alloy, the SLMed GZ112K alloy has much higher YS (+162 MPa), UTS (+122 MPa) and comparable elongation (+0.4%).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Additive Manufacturing Materials and Processes · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Magnesium properties—applications—potential10.1016/S0921-5093(00)01351-4 ↗
2. Microstructure evolution and mechanical properties of an ultra-high strength casting Mg–15.6Gd–1.8Ag–0.4Zr alloy10.1016/j.jallcom.2014.07.028 ↗
3. Fabrication of high-strength Mg-Gd-Zn-Zr alloys via differential-thermal extrusion10.1016/j.matchar.2017.07.031 ↗
4. Formation of lamellar phase with 18R-type LPSO structure in an as-cast Mg96Gd3Zn1(at%) alloy10.1016/j.matlet.2015.12.080 ↗
5. Characteristic zirconium-rich coring structures in Mg–Zr alloys10.1016/S1359-6462(02)00046-5 ↗
6. Characterization and strengthening effects of γ′ precipitates in a high-strength casting Mg-15Gd-1Zn-0.4Zr (wt.%) alloy10.1016/j.matchar.2017.02.010 ↗
7. Development of high strength sand cast Mg–Gd–Zn alloy by co-precipitation of the prismatic β′ and β1 phases10.1016/j.matchar.2019.04.036 ↗
8. A review of magnesium die-castings for closure applications10.1016/j.jma.2019.02.005 ↗
9. Heat treatment and mechanical properties of a high-strength cast Mg–Gd–Zn alloy10.1016/j.msea.2015.11.021 ↗
10. Microstructure and mechanical behavior of an additive manufactured (AM) WE43-Mg alloy
11. Microstructure and mechanical properties of Al–12Si produced by selective laser melting: effect of heat treatment10.1016/j.msea.2013.10.023 ↗
12. Strengthening mechanisms in the rapidly solidified AZ 91 magnesium alloy10.1016/0036-9748(89)90303-7 ↗
13. Microstructure and mechanical properties of selective laser melted magnesium10.1016/j.apsusc.2011.03.004 ↗
14. Effect of energy input on formability, microstructure and mechanical properties of selective laser melted AZ91D magnesium alloy10.1016/j.msea.2014.05.092 ↗
15. Additive manufactured WE43 magnesium: a comparative study of the microstructure and mechanical properties with those of powder extruded and as-cast WE4310.1016/j.matchar.2018.11.011 ↗
16. Solidification-driven orientation gradients in additively manufactured stainless steel10.1016/j.actamat.2019.10.047 ↗
17. Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy10.1016/j.msea.2011.11.092 ↗
18. A study of the microstructural evolution during selective laser melting of Ti–6Al–4V10.1016/j.actamat.2010.02.004 ↗
19. Effect of aging treatment on the microstructure and mechanical properties of Al-3.02Mg-0.2Sc-0.1Zr alloy printed by selective laser melting10.1016/j.matdes.2019.107668 ↗
20. An investigation into interaction between magnesium powder and Ar gas: implications for selective laser melting of magnesium10.1016/j.powtec.2018.04.026 ↗
21. Experimental investigation on selective laser melting of bulk net-shape pure magnesium10.1080/10426914.2015.1025963 ↗
22. Effects of processing parameters on properties of selective laser melting Mg–9%Al powder mixture10.1016/j.matdes.2011.06.061 ↗
23. Microstructure and mechanical properties of selective laser melted Mg-9 wt%Al powder mixture10.1016/j.matlet.2018.03.068 ↗
24. Process influences on laser-beam melting of the magnesium alloy AZ9110.1016/j.phpro.2016.08.097 ↗
25. Design of experiments approach in AZ31 powder selective laser melting process optimization10.1016/j.acme.2016.07.007 ↗
26. Fracture behaviour of a magnesium–aluminium alloy treated by selective laser surface melting treatment10.1016/j.matdes.2013.10.010 ↗
27. Microstructure evolution and biodegradation behavior of laser rapid solidified Mg–Al–Zn alloy10.3390/met7030105 ↗
28. Influence of laser process parameters on the densification, microstructure, and mechanical properties of a selective laser melted AZ61 magnesium alloy10.1016/j.jallcom.2019.06.261 ↗
29. Microstructure, biodegradation, antibacterial and mechanical properties of ZK60-Cu alloys prepared by selective laser melting technique10.1016/j.jmst.2018.02.006 ↗
30. Influence of element vaporization on formability, composition, microstructure, and mechanical performance of the selective laser melted Mg–Zn–Zr components10.1016/j.matlet.2015.05.074 ↗
31. Study on porous Mg-Zn-Zr ZK61 alloys produced by laser additive manufacturing10.3390/met8080635 ↗
32. Selective laser melting of Mg-Zn binary alloys effects of Zn content on densification behavior, microstructure, and mechanical property10.1016/j.msea.2019.04.067 ↗
33. Effect of laser processing parameters on porosity, microstructure and mechanical properties of porous Mg-Ca alloys produced by laser additive manufacturing10.1016/j.msea.2017.07.031 ↗
34. Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder10.1016/j.actamat.2012.11.052 ↗
35. Effects of processing parameters on tensile properties of selective laser melted 304 stainless steel10.1016/j.matdes.2013.03.056 ↗
36. Microstructure formed during selective laser melting of IN738LC in keyhole mode10.1016/j.jallcom.2019.03.419 ↗
37. Metal vaporization from weld pools10.1007/BF02657376 ↗
38. Effect of strontium on the microstructure, mechanical properties, and fracture behavior of AZ31 magnesium alloy10.1007/s11661-006-1085-8 ↗
39. The interdependence theory: the relationship between grain formation and nucleant selection10.1016/j.actamat.2011.04.035 ↗
40. Additive manufacturing of ultrafine-grained high-strength titanium alloys10.1038/s41586-019-1783-1 ↗
41. Current research progress in grain refinement of cast magnesium alloys: a review article10.1016/j.jallcom.2014.09.061 ↗
42. Solute segregation and precipitation in a creep-resistant Mg–Gd–Zn alloy10.1016/j.actamat.2008.08.025 ↗
43. Formation of a lamellar 14H-type long period stacking ordered structure in an as-cast Mg–Gd–Zn–Zr alloy10.1007/s10853-008-3213-x ↗
44. Model for solute redistribution during rapid solidification10.1063/1.329867 ↗
45. Exploring the Hall-Petch relation and strengthening mechanism of bimodal-grained Mg–Al–Zn alloys10.1016/j.jallcom.2020.155004 ↗
46. Strengthening mechanisms and their superposition law in an age-hardenable Mg-10 wt pct Y alloy10.1007/s11661-012-1162-0 ↗
47. The effect of process parameters on residual stress evolution and distortion in the laser powder bed fusion of Ti-6Al-4V
48. Effect of heat treatment on the microstructures and mechanical properties of the extruded Mg–11Gd–1Zn alloy10.1016/j.jallcom.2012.08.045 ↗
49. Heat transfer modelling and stability analysis of selective laser melting10.1016/j.apsusc.2007.08.074 ↗