A procedure to obtain correlation curve between local misorientation and plastic strain
Source abstract
Abstract
Numerous studies have assessed the degree of plastic strain induced in polycrystalline materials using crystal orientation mapping data obtained by electron backscatter diffraction. However, it was pointed out that the local misorientation, defined as the averaged misorientation between adjacent measurement points, was difficult to use for a quantitative assessment because the magnitude of the local misorientation was affected by various measurement conditions including the step size, that is the spacing of the crystal orientation measurement points. To quantitatively assess the local misorientation, this study proposed a procedure for estimating the correlation curve between the local misorientation and the degree of plastic strain, which is referred to as the master curve. The procedure to determine the master curve was proposed using Type 316 stainless steel specimens of various degrees of plastic strain. The procedure was based on the characteristics of the change in the misorientation parameters due to the measurement conditions that were investigated using the crystal orientations obtained for various conditions and specimens. It was shown that similar local plastic strain distributions were obtained regardless of the measurement conditions, including especially the step size. From the findings, it was recommended that a smoothing filter should be applied when making a quantitative assessment of the local misorientation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Plastic deformation and creep damage evaluations of type 316 austenitic stainless steels by EBSD10.1016/j.matchar.2010.05.006 ↗
2. Fatigue damage assessment of SUS316L using EBSD and PALS measurements10.1016/j.matchar.2019.05.038 ↗
3. Misorientation development in grains of tensile strained and crept 2.25%Cr-1%Mo steel10.1016/S1359-6462(01)01197-6 ↗
4. Measurement of plastic strain of polycrystalline material by electron backscatter diffraction10.1016/j.nucengdes.2004.11.006 ↗
5. Misorientation mapping for visualization of plastic deformation via electron back-scattered diffraction10.1017/S1431927606060120 ↗
6. Strain mapping near a triple junction in strained Ni-based alloy using EBSD and biaxial nanogauges10.1016/j.actamat.2011.01.051 ↗
7. Overcoming the drawbacks of plastic strain estimation based on KAM10.1016/j.ultramic.2017.08.013 ↗
8. In situ SEM-EBSD analysis of plastic deformation mechanisms in neutron-irradiated austenitic steel10.1016/j.jnucmat.2019.01.034 ↗
9. EBSD- and ECCI-based assessments of inhomogeneous plastic strain evolution coupled with digital image correlation
10. Creep damage assessment of high chromium heat resistant steels and weldments10.1016/j.msea.2008.08.045 ↗
11. Rui · Materials Science & Engineering A. · 2018 · 733 · 32910.1016/j.msea.2018.07.058 ↗
12. EBSD analysis of creep deformation induced grain lattice distortion: a new method for creep damage evaluation of austenitic stainless steels10.1016/j.msea.2018.07.058 ↗
13. Characterization of microstructural damage due to low-cycle fatigue by EBSD observation10.1016/j.matchar.2009.07.003 ↗
14. Fatigue damage evaluation using electron backscatter diffraction10.2320/matertrans.M2011014 ↗
15. A comparison of EBSD based strain indicators for the study of Fe-3Si steel subjected to cyclic loading10.1016/j.matchar.2016.03.020 ↗
16. EBSD analysis of cyclic load effect on final misorientation distribution of post-mortem low alloy steel: a new method for fatigue crack tip driving force prediction10.1016/j.ijfatigue.2018.04.016 ↗
17. ISO 23703 · 2022
18. Quantification of plastic strain of stainless steel and nickel alloy by electron backscatter diffraction10.1016/j.actamat.2005.08.046 ↗
19. A round robin EBSD measurement for quantitative assessment of small plastic strain10.1016/j.matchar.2020.110662 ↗
20. Round robin crystal orientation measurement using EBSD for damage assessment10.1299/mej.16-00077 ↗
21. Assessment of local deformation using EBSD: quantification of accuracy of measurement and definition of local gradient10.1016/j.ultramic.2011.02.004 ↗
22. Local plastic strain measurement by EBSD10.4028/www.scientific.net/AMM.7-8.173 ↗
23. Theory of orientation gradients in plastically strained crystals10.1016/S1359-6454(01)00323-8 ↗
24. Analysis of local orientation gradients in deformed single crystal10.1016/j.ultramic.2004.11.016 ↗
25. Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD10.1016/j.msea.2010.01.004 ↗
26. Determination of elastic strain fields and geometrically necessary dislocation distributions near nanoindents using electron back scatter diffraction10.1080/14786430903304145 ↗
27. Investigation of the indentation size effect through the measurement of the geometrically necessary dislocations beneath small indents of different depths using EBSD tomography10.1016/j.actamat.2008.09.039 ↗
28. Strain mapping near a triple junction in strained Ni-based alloy using EBSD and biaxial nanogauges10.1016/j.actamat.2011.01.051 ↗
29. Assessment of geometrically necessary dislocation levels derived by 3D EBSD
30. Correlations between two EBSD-based metrics Kernel Average Misorientation and Image Quality on indicating dislocations of near-failure low alloy steels induced by tensile and cyclic deformations
31. Influence of bulk damage on crack initiation in low-cycle fatigue of Type 316 stainless steel10.1111/j.1460-2695.2009.01420.x ↗
32. Observation of fatigue crack initiation and growth in stainless steel to quantify low-cycle fatigue damage for plant maintenance
33. Measurement of local plastic strain distribution of stainless steel by electron backscatter diffraction10.1016/j.matchar.2008.07.010 ↗
34. A smoothing filter for misorientation mapping obtained by EBSD10.2320/matertrans.MAW201005 ↗
35. Assessment of local deformation using EBSD: quantification of local damage at grain boundaries10.1016/j.matchar.2012.02.001 ↗
36. A new method for determining small misorientations from electron back scatter diffraction patterns10.1016/S1359-6462(01)00943-5 ↗
37. Problems in determining the misorientation axes, for small angular misorientations, using electron backscatter diffraction in the SEM10.1046/j.1365-2818.1999.00572.x ↗
38. Improving the precision of orientation measurements from technical materials via EBSD pattern matching10.1016/j.actamat.2018.08.028 ↗