journal article·2021-08

HRTEM investigations on nano precipitates in Custom 475 maraging stainless steel

Cheng-Yao Huang, Hung-Wei Yen

Publisher page

Abstract

Abstract In this work, nano precipitates in stainless maraging steel (Custom 475) were investigated using high-resolution transmission electron microscopy. In this steel, aging induces three transformation products, NiAl-B2 phase, R phase and austenite, which contribute various hardening effects dependent on the aging temperature. In the steel aged at 480 °C, precipitation of NiAl-B2 phase was the primary reaction and led to slow incremental hardening. No hardening effect was observed in the steel aged at 650 °C despite the presence of austenite of over 25 vol% and coarse B2 and R phases. Efficient hardening was obtained by aging at 520 °C, and the maximum hardness (601 HV) was achieved when the steel was aged for 4 h. This high strength is attributed to the formation of both B2 and R nano precipitates. Moreover, lattice images and diffractograms clarified the crystal structure of the R phase and its orientation relationship with the martensite matrix. This work provides comprehensive insights into precipitation behaviors in Custom 475 maraging steel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. The hardening mechanism in maraging steels
2. Structure and hardening mechanisms of 18 percent nickel-cobalt-molybdenum maraging steels
3. A study of precipitation in stainless and maraging steels using the Moessbauer effect (Mossbauer spectroscopy used to study precipitation reactions in 17-7 PH stainless steel and in 18 Ni-8 Co-5 Mo maraging steel)
4. Progress toward attaining theoretical strength with iron-nickel maraging steels10.1007/BF03378496 ↗
5. Kinetics of aging reactions in 18 PCT NI maraging steels
6. Identification of strengthening precipitates in 18 Ni/250/ aluminum, vanadium, and titanium maraging steels (Primary and secondary strengthening precipitates in 18 Ni/250/Al, V and Ti maraging steels)
7. The physical metallurgy of maraging steels10.1179/imr.1968.13.1.115 ↗
8. Precipitation in 18 wt% Ni maraging steel of grade 35010.1016/S1359-6454(99)00370-5 ↗
9. The limits of strength and toughness in steel10.2355/isijinternational.41.599 ↗
10. Modelling the correlation between processing parameters and properties of maraging steels using artificial neural network10.1016/S0927-0256(03)00092-2 ↗
11. Precipitation hardening in a 12%Cr-9%Ni-4%Mo-2%Cu stainless steel10.1016/j.actamat.2003.10.048 ↗
12. Microstructure and mechanical properties of a 2000 MPa Co-free maraging steel after aging at 753 K10.1007/s11661-004-0221-6 ↗
13. Ageing behaviour of an Fe-20Ni-1.8Mn-1.6Ti-0.59Al (wt%) maraging alloy: clustering, precipitation and hardening10.1016/j.actamat.2004.08.018 ↗
14. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
15. Microstructural evolution in 13Cr-M-2.5Mo-2Al martensitic precipitation-hardened stainless steel10.1016/j.msea.2004.12.002 ↗
16. Characterization of nanoscale NiAl-type precipitates in a ferritic steel by electron microscopy and atom probe tomography10.1016/j.scriptamat.2010.03.013 ↗
17. Alloying element segregation effect in a multi-phase strengthened maraging stainless steel
18. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation10.1038/nature22032 ↗
19. A SANS and APT study of precipitate evolution and strengthening in a maraging steel10.1016/j.msea.2017.07.013 ↗
20. A new maraging stainless steel with excellent strength-toughness-corrosion synergy10.3390/ma10111293 ↗
21. A novel ultra-high strength maraging steel with balanced ductility and creep resistance achieved by nanoscale beta-NiAl and Laves phase precipitates10.1016/j.actamat.2018.02.044 ↗
22. Composition of the strengthening phases in a magnetic steel Fe--15 Ni--15 Co--10 W
23. Structure and composition of the phases precipitating on Fe-Ne-V martensite aging
24. Precipitation reactions and strengthening behavior in 18 WT Pct nickel maraging steels10.1007/BF02646061 ↗
25. Precipitation hardening in 350-grade maraging-steel10.1007/BF02646522 ↗
26. Overview of intermetallic sigma10.5402/2012/732471 ↗
27. Precipitation characteristics of μ-phase in wrought nickel-base alloys and its effect on their properties10.1007/BF00352653 ↗
28. Phase chemistry and precipitation reactions in maraging steels. 1. Introduction and study of co-containing C-300 steel10.1007/BF02668190 ↗
29. Isothermal formation of quasi-crystalline precipitates and their effect on strength in a 12CR-9NI-4MO maraging stainless-steel10.1007/BF02652323 ↗
30. Chi-phase precipitation in a duplex stainless steel10.1016/j.matchar.2009.04.013 ↗
31. Laves phase in 22Cr-27Ni-2Ti-Al austenitic valve steel10.1016/S1006-706X(16)30192-3 ↗
32. The crystal structure of the r-phase, Mo-Co-Cr10.1107/S0365110X60001394 ↗
33. A study of precipitation in a 12 percent Cr-Co-Mo steel10.1016/0001-6160(69)90054-6 ↗
34. Quasi-crystalline and crystalline precipitation during isothermal tempering in a 12CR-9NI-4MO maraging stainless-steel10.1016/0956-7151(94)00461-P ↗
35. Degradation of impact toughness due to formation of R phase in high nitrogen 25Cr-7Ni-Mo duplex stainless steels10.2355/isijinternational.41.192 ↗
36. Intermetallicr-phase in maraging steels of the Fe-Cr-Ni-Co-Mo system10.1007/s11041-006-0102-2 ↗
37. Crystal-structure units of the R (Fe(3)Mo(2)) phase in the Fe-Mo alloy system10.1103/PhysRevB.77.134205 ↗
38. Development of custom 465(A (R)) corrosion-resisting steel for landing gear applications10.1007/s11665-015-1830-5 ↗
39. Linear friction welding process model for carpenter custom 465 precipitation-hardened martensitic stainless steel10.1007/s11665-014-0985-9 ↗
40. The relation between aging temperature, microstructure evolution and hardening of custom 465 (R) stainless steel10.1016/j.matchar.2017.02.023 ↗
41. Hydrogen diffusivity measurement and microstructural characterization of custom 465 stainless steel10.1016/j.electacta.2015.08.016 ↗
42. Environment-assisted cracking in custom 465 stainless steel10.1007/s11661-010-0401-5 ↗
43. The effect of eta-Ni3Ti precipitates and reversed austenite on the passive film stability of nickel-rich custom 465 steel10.1016/j.corsci.2019.04.016 ↗
44. Study of B1 (NaCl-type) to B2 (CsCl-type) pressure-induced structural phase transition in BaS, BaSe and BaTe using ab initio computations10.1088/0953-8984/25/7/075401 ↗