journal article·2019-07

Microstructure evolution of Al6061 and copper during ultrasonic energy assisted compression

Anagh Deshpande, Alireza Tofangchi, Keng Hsu

Publisher page

Abstract

Abstract Metal forming is often performed at elevated temperatures, typically above the recrystallization temperature of metals, which results in a reduction in yield stress during forming. Similar reduction in yield stress can also be achieved by simultaneous application of ultrasonic energy during deformation. The resulting softening of metals causes a reduction in the forming forces and increased ductility. A thorough understanding of the effect of ultrasonic energy irradiation during deformation on the microstructure is lacking which seems to be inhibiting wider adoption of ultrasonic energy in more manufacturing processes. In this manuscript, a detailed analysis of the microstructure of aluminum 6061 alloy and copper, which have identical Faced-Center Cubic crystal structure but different stacking fault energies, has been presented. Focus has been placed on the differences between their microstructure evolution behaviors after deformation under simultaneous application of ultrasonic energy. These differences have been distinctly highlighted using Electron Backscatter Diffraction (EBSD) and TEM analysis. EBSD analysis revealed assistance to subgrain formation due to ultrasonic energy. It was also observed that due to lack of dynamic recovery, copper underwent discontinuous dynamic recrystallization (DDRX) during ultrasonic energy assisted deformation. On the other hand, the recrystallization mechanism in Al6061 alloy was found to be geometric dynamic recrystallization (gDRX). The insights obtained in this work potentially advance the understanding of mechanisms governing microstructure evolution during ultrasonic energy assisted deformation and establish analogy between the mechanisms governing thermomechanical processing and ultrasonic energy assisted deformation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Effects of ultrasound on deformation characteristics10.1109/T-SU.1966.29367 ↗
2. Titanium wire drawing with longitudinal-torsional composite ultrasonic vibration10.1007/s00170-015-7540-1 ↗
3. An investigation of conventional and ultrasonic-assisted forming of annealed AA1050 sheet
4. Theoretical and experimental analyses of ultrasonic-assisted indentation forming of tube10.1177/0954405413501502 ↗
5. Effect of ultrasonic vibration on welding load, temperature and material flow in friction stir welding10.1016/j.jmatprotec.2016.08.025 ↗
6. The ultrasonic welding mechanism as applied to aluminum- and gold-wire bonding in microelectronics
7. Theoretical and experimental analyses of atom diffusion characteristics on wire bonding
8. Nano features of Al/Au ultrasonic bond interface observed by high resolution transmission electron microscopy10.1016/j.matchar.2008.01.001 ↗
9. Microstructure evolution of 6061 O Al alloy during ultrasonic consolidation: an insight form electron backscatter diffraction10.1016/j.actamat.2009.12.035 ↗
10. Transmission electron microscopy of an ultrasonically consolidated copper-aluminum interface10.1557/jmr.2014.176 ↗
11. J. W. G. J., S. G. A., T. A. B. Steve Koellhoffer, "Role of friction on the thermal development in ultrasonically consolidated aluminum foils and composites," J. Mater. Process. Technol., vol. 211, no. 11, pp. 1864–1877, November 2011.
12. Microstructure and mechanical properties of ultrasonic spot welded copper-to-magnesium alloy joints10.1016/j.matdes.2015.06.104 ↗
13. Microstructural characterization and mechanical properties of high power ultrasonic spot welded aluminum alloy AA6111-Ti-Al6V4 dissimilar joints10.1016/j.matchar.2014.09.001 ↗
14. Microstructure and mechanical properties of an ultrasonic spot welded aluminum alloy: the effect of welding energy10.3390/ma10050449 ↗
15. Microstructure and mechanical properties of ultrasonic welded joint of 1060 aluminum alloy and T2 pure copper10.3390/met7090361 ↗
16. Acoustoplastic metal direct-write: towards solid aluminum 3D printing in ambient conditions10.1016/j.addma.2017.11.006 ↗
17. Analytical description of ultrasonic hardening and softening10.1016/j.ultras.2011.02.003 ↗
18. Thermomechanical analyses of ultrasonic welding process using10.1016/j.mechmat.2008.06.004 ↗
19. G.-Y. K., Z. W., L. F., Q. Z., D. M., Z. C., Zhehe Yao, "Acoustic softening and residual hardening in aluminum: modeling," Int. J. Plast., vol. 39, pp. 75–87, 2012.10.1016/j.ijplas.2012.06.003 ↗
20. Microstructural analysis of ultrasonic welded AA6061 by electron backscattered diffraction
21. A thermomechanical crystal plasticity constitutive model for ultrasonic consolidation10.1016/j.commatsci.2011.07.023 ↗
22. Acoustic softening in metals during ultrasonic assisted deformation via CP-FEM10.1016/j.matlet.2010.10.031 ↗
23. A comparative study of mechanical and microstructural characteristics of aluminium and titanium undergoing ultrasonic assisted compression testing10.1016/j.msea.2016.11.021 ↗
24. Acoustic energy enabled dynamic recovery in aluminium and its effects on stress evolution and post-deformation microstructure10.1016/j.msea.2017.11.015 ↗
25. Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions10.1016/j.pmatsci.2013.09.002 ↗
26. A review of dynamic recrystallization ohenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
27. Geometric dynamic recrystallization in hot torsion of Al-5Mg-0.6Mn10.1016/0921-5093(95)09990-5 ↗
28. A new grain orientation spread approach to analyze the dynamic recrystallization behavior of a cast-homoginized Mg-Zn-Zr alloy using electron backscatter diffraction10.1016/j.msea.2017.10.062 ↗
29. The new grain formation during warm and hot deformation of copper10.1115/1.1925284 ↗
30. Dynamic recrystallisation: plasticity enhancing structural development10.1016/j.jallcom.2003.10.067 ↗
31. New insight on acoustoplasticity – ultrasonic irradiation enhances subgrain formation during deformation10.1016/j.ijplas.2010.09.007 ↗
32. McQueen · 2011
33. Grain structure in a 6061 aluminum alloy during torsion10.1016/j.msea.2005.12.018 ↗
34. Subgrain development in hot working of Al and Al-5Mg10.1016/S0921-5093(97)00331-6 ↗