Uniaxial ratcheting behavior and microstructure evolution of 316H stainless steel under the random cyclic loads
Source abstract
Abstract
In this study, the Computational Fluid Dynamics (CFD)-Finite Element Method (CFD-FEM) were used to simulate the transient stress response of the structure surface under thermal striping environment, and a uniaxial random cyclic loading (RCL) method was used to reveal the mechanical properties and initial microstructure evolution of 316H austenitic stainless steel (SS) under random stress induced by thermal striping. The experimental results showed that 316H exhibited a lower saturation ratcheting strain rate at 334.44 MPa, along with stronger cyclic hardening effects and resistance to plastic accumulation at loading rate of 100 Hz. Random loading tests with different cycles were performed at σ peak = 334.44 MPa and f R C L = 100 Hz , and ratcheted specimens were characterized to investigate the effect of the micro-mechanism on cyclic softening/hardening. The geometrically necessary dislocation (GND) density increases and then decreases with cyclic loading, which is mainly attributed to the deformation twin (DT) and multi-dislocation slip mechanisms. The deformation mechanism during the ratcheting cycle from 1000 to 3000 cycles is mainly dominated by the twinning reduction, where the dislocation migration accelerated the transformation from dislocation walls to subgrain boundaries; the twinning increase dominates from 3000 to 9000 cycles, where the subgrain boundary grew into boundaries with high angle misorientations.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Effect of hot rolling process on the mechanical and microstructural property of the 9Cr–1Mo steel10.1016/j.anucene.2011.07.027 ↗
2. Séran · 2017 · 285
3. Some thermal hydraulic challenges in sodium cooled fast reactors10.1016/j.nucengdes.2010.01.006 ↗
4. Tanaka · 2009
5. Risk assessment of thermal striping in MYRRHA research reactor10.1016/j.nucengdes.2017.04.031 ↗
6. Investigation of V&V process for thermal fatigue issue in a sodium cooled fast reactor–application of uncertainty quantification scheme in verification and validation with fluid-structure thermal interaction problem in T-junction piping system10.1016/j.nucengdes.2014.03.006 ↗
7. Study on convective mixing for thermal striping phenomena (experimental analyses on mixing process in parallel triple-jet and comparisons between numerical methods)10.1299/jsmeb.45.592 ↗
8. A next generation sodium-cooled fast reactor concept and its R&D program10.5516/NET.2007.39.3.171 ↗
9. Comparison of lifetime assessments between ASME and RCC-MRx in liquid metal nuclear research reactors surfing from thermal striping10.1016/j.nucengdes.2022.111988 ↗
10. Thermal-striping analysis methodology for sodium-cooled reactor design10.1016/j.ijheatmasstransfer.2021.121321 ↗
11. Study of the quantitative assessment method for high-cycle thermal fatigue of a T-pipe under turbulent fluid mixing based on the coupled CFD-FEM method and the rainflow counting method10.1016/j.nucengdes.2016.09.021 ↗
12. Cladding design on lower head of the central measuring shroud in a fast reactor against thermal striping10.1016/j.nucengdes.2019.110389 ↗
13. Thermomechanical fatigue properties and microstructural damage of nitrogen alloyed 316LN stainless steel10.1016/j.ijfatigue.2020.105704 ↗
14. Dislocation evolution in 316L stainless steel subjected to uniaxial ratchetting deformation10.1016/j.msea.2010.06.020 ↗
15. Ratcheting-induced twinning/de-twinning behaviors in a 316LN austenitic stainless steel10.1016/j.msea.2022.143648 ↗
16. Uniaxial ratcheting behavior and molecular dynamics simulation evaluation of 316LN stainless steel10.1016/j.msea.2022.143535 ↗
17. Ratcheting deformation behavior of 316LN stainless steel under thermomechanical and isothermal loadings10.1016/j.ijfatigue.2020.105718 ↗
18. Influence of dynamic strain aging on the deformation behavior during ratcheting of a 316LN stainless steel10.1016/j.msea.2012.11.115 ↗
19. Dynamic strain aging-mediated temperature dependence of ratcheting behavior in a 316LN austenitic stainless steel10.1016/j.msea.2022.144503 ↗
20. Numerical study on thermal stress fluctuation caused by coaxial-jet flow in lower head of central measurement column10.1016/j.ijpvp.2022.104757 ↗
21. A multiaxial fatigue life prediction method for metallic material under combined random vibration loading and mean stress loading in the frequency domain10.1016/j.ijfatigue.2021.106235 ↗
22. Steady and unsteady calculations on thermal striping phenomena in triple-parallel jet10.1016/j.nucengdes.2016.06.015 ↗
23. Time-domain extrapolation method for tractor drive shaft loads in stationary operating conditions10.1016/j.biosystemseng.2021.08.020 ↗
24. A critical plane-energy model for multiaxial fatigue life prediction10.1111/ffe.12614 ↗
25. Ratcheting behavior of SA508-3 steel at elevated temperature: experimental observation and simulation10.1007/s40195-017-0588-1 ↗
26. Ratcheting and fatigue behavior of a copper alloy under uniaxial cyclic loading with mean stress10.1016/j.ijfatigue.2008.04.008 ↗
27. Molecular dynamics simulation study of uniaxial ratcheting behaviors for ultrafine-grained nanocrystalline nickel10.1007/s11665-019-04256-z ↗
28. EBSD based studies on various modes of cyclic deformation at 923 K in a type 316LN stainless steel10.1016/j.msea.2018.02.101 ↗
29. Grain refinement by dynamic recrystallization during laser direct energy deposition of 316L stainless steel under thermal cycles10.1016/j.jmapro.2022.01.057 ↗
30. Investigation on temporal evolution of the grain refinement in copper under high strain rate loading via in-situ synchrotron measurement and predictive modeling10.1016/j.actamat.2017.10.005 ↗
31. Induction of large twin related domains and the grain boundary evolution during hot plate rolling and annealing of 316H-type stainless steel10.1016/j.matlet.2021.131590 ↗
32. Measurements of subgrain growth in a single-phase aluminum alloy by high-resolution EBSD10.1016/S1044-5803(01)00175-9 ↗
33. Internal stress relaxation and load redistribution during the twinning–detwinning-dominated cyclic deformation of a wrought magnesium alloy, ZK60A10.1016/j.actamat.2008.04.006 ↗
34. On the first direct observation of de-twinning in a twinning-induced plasticity steel10.1016/j.actamat.2018.06.029 ↗
35. Softening mechanisms in ultrasonic treatment of deformed austenitic stainless steel10.1016/j.ultras.2021.106519 ↗
36. Influence of plastic deformation heterogeneity on development of geometrically necessary dislocation density in dual phase steel10.1016/j.msea.2016.05.022 ↗
37. Multiaxial high-cycle fatigue life prediction under random spectrum loadings10.1016/j.ijfatigue.2019.105462 ↗
38. Visco-plastic constitutive modeling on Ohno–Wang kinematic hardening rule for uniaxial ratcheting behavior of Z2CND18. 12N steel10.1016/j.ijplas.2011.06.001 ↗
39. Constitutive modelling of ratcheting behaviour for nickel-based single crystal superalloy under thermomechanical fatigue loading considering microstructure evolution10.1016/j.ijfatigue.2020.105786 ↗
40. Dual frequency domain characteristics of ratcheting behavior of AZ31B alloy under asymmetrically stress-controlled loading mode10.1016/j.matchar.2022.112574 ↗
41. Dislocation density-based plasticity model from massive discrete dislocation dynamics database10.1016/j.jmps.2020.104152 ↗
42. Grain structure, texture and mechanical property evolution of automotive aluminium sheet during high power ultrasonic welding10.1016/j.matchar.2016.06.004 ↗
43. Design of a twinning-induced plasticity high entropy alloy10.1016/j.actamat.2015.04.014 ↗
44. The dislocation-based fatigue deformation mechanism of a RAFM steel under multi-axial loadings10.1016/j.jnucmat.2021.153324 ↗
45. Hierarchical evolution and thermal stability of microstructure with deformation twins in 316 stainless steel10.1016/j.msea.2017.03.073 ↗
46. Large scale atomistic simulations of screw dislocation structure, annihilation and cross-slip in FCC Ni10.1016/S0921-5093(00)01716-0 ↗
47. Influence of cellular subgrain feature on mechanical deformation and properties of directed energy deposited stainless steel 316 L
48. Mechanisms of DRX nucleation with grain boundary bulging and subgrain rotation during the hot working of nickel-based superalloys with columnar grains10.1016/j.jallcom.2019.01.334 ↗