journal article·2022-11

Insights on early recovery kinetics in ferrite - pearlite cold rolled high strength sheet steels

S. Janakiram, P. Sudharshan Phani, Govind Ummethala, Hima Viswa Jagdeesh, Sairam K. Malladi, J. Gautam, Leo A.I. Kestens

Publisher page

Abstract

This study presents the results of temperature and composition dependent recovery behavior of ferrite-pearlite high strength steels. Annealing of cold rolled sheets at 300 °C with varying pearlite fractions results in an increase in hardness that scales with the pearlite content. In contrast, annealing at 500 °C results in a decrease in hardness, independent of pearlite content. By coupling complementary techniques such as high resolution nanoindentation mapping and electron microscopy (EBSD and TEM), microstructure-property correlations at the micrometer length scale are established to provide new insights on the driving force for temperature and composition dependent recovery kinetics. Simple recovery models are also discussed to complement the microstructural observations. Collectively, these results offer insights into the role of individual phases in the early recovery of ferrite-pearlite high strength steels that are critical for subsequent processing steps including inter-critical annealing.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Intercritical annealing of cold-rolled ferrite-pearlite steel: microstructure evolutions and phase transformation kinetics10.1016/j.actamat.2021.116920 ↗
2. Interaction between recrystallization and phase transformation during intercritical annealing in a cold-rolled dual-phase steel: a cellular automaton model10.1016/j.actamat.2013.05.040 ↗
3. Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging10.1016/j.actamat.2010.10.002 ↗
4. Microstructure and texture evolution in dual-phase steels: competition between recovery, recrystallization, and phase transformation10.1016/j.msea.2010.03.028 ↗
5. Transformation-induced plasticity (TRIP) in advanced steels: a review10.1016/j.msea.2020.140023 ↗
6. An overview of dual-phase steels: advances in microstructure-oriented processing and micromechanically guided design10.1146/annurev-matsci-070214-021103 ↗
7. Effect of pearlite morphology on recrystallization behaviour in cold rolled high strength automotive steel sheets10.1088/1742-6596/1270/1/012015 ↗
8. New insights on recovery and early recrystallization of ferrite-pearlite banded cold rolled high strength steels by high speed nanoindentation mapping10.1016/j.scriptamat.2020.113676 ↗
9. Microstructural and micro hardness variation during low temperature recovery annealing in C-Mn high strength steels10.1088/1742-6596/1270/1/012017 ↗
10. Recovery during annealing in a cold rolled low carbon steel. Part I: kinetics and microstructural characterization10.1016/j.actamat.2004.04.019 ↗
11. Dutta · 2020
12. Defect recovery in severely deformed ferrite lamellae during annealing and its impact on the softening of cold-drawn pearlitic steel wires10.1007/s11661-015-3263-z ↗
13. Change in carbon state by low-temperature aging in heavily drawn pearlitic steel wires10.1016/j.actamat.2011.09.014 ↗
14. Evolution of strength and microstructure during annealing of heavily cold-drawn 6.3 GPa hypereutectoid pearlitic steel wire10.1016/j.actamat.2012.03.006 ↗
15. Microstructural and microhardness variation during low temperature recovery annealing in C-Mn high strength steels10.1088/1742-6596/1270/1/012017 ↗
16. “Back-annealing” of cold rolled steels through recovery and/or partial recrystallisation10.1179/095066010X12646898728444 ↗
17. Raabe · 2014
18. Orientation dependent recovery in interstitial free steel10.2355/isijinternational.52.884 ↗
19. Recovery processes in the ferrite phase in C-Mn steel10.2355/isijinternational.44.1188 ↗
20. Modelling recovery kinetics in high-strength martensitic steels10.1080/09500839.2017.1342048 ↗
21. Modeling the effect of solute drag on recovery and recrystallization during hot deformation of Nb microalloyed steels10.2355/isijinternational.50.239 ↗
22. Chapter 6 Recovery After
23. Comparison of the annealing behaviour between cold and warm rolled ELC steels by thermoelectric power measurements10.1016/j.actamat.2006.11.010 ↗
24. Resistivity recovery of high purity and carbon doped iron following low temperature electron irradiation10.1080/00337578308207398 ↗
25. Effect of annealing treatment on mechanical and magnetic softening behaviors of cold rolled interstitial-free steel10.1007/s11665-019-03953-z ↗
26. TNR dependent hot rolling microstructure and texture development in c-Mn dual phase and HSLA steels10.4028/www.scientific.net/DDF.391.120 ↗
27. A critical assessment of the effect of indentation spacing on the measurement of hardness and modulus using instrumented indentation testing10.1016/j.matdes.2018.107563 ↗
28. Critical assessment of high speed nanoindentation mapping technique and data deconvolution on thermal barrier coatings10.1016/j.matdes.2019.108084 ↗
29. Image quality analysis: a new method of characterizing microstructures10.2355/isijinternational.45.254 ↗
30. Evolution of microstructural banding during the manufacturing process of dual phase steels10.2320/matertrans.47.2269 ↗
31. Microstructure and texture control in cold rolled high strength steels10.4028/www.scientific.net/DF.22.84 ↗
32. Development of a new generation of quench and partitioning steels: influence of processing parameters on texture, nanoindentation, and mechanical properties10.1016/j.matdes.2019.108329 ↗
33. Pereloma · 2017
34. Shimokawa · 2020 · 61 · 2139
35. Dislocation theory of yielding and strain ageing of iron10.1088/0370-1298/62/1/308 ↗
36. No title
37. Recovery revisited10.1016/0956-7151(94)00409-9 ↗
38. Model for the Cottrell atmosphere formation during aging of ultra low carbon bake hardening steels10.2355/isijinternational.40.725 ↗
39. Kinetics of strain aging in bake hardening ultra low carbon steel-a comparison with low carbon steel10.1361/105994901770344719 ↗
40. Kinetics of low temperature precipitation in a ULC-bake hardening steel10.1016/S1359-6462(00)00638-2 ↗
41. Recovery and recrystallization kinetics of differently rolled, thin tungsten plates in the temperature range from 1325 ° C to 1400 ° C
42. Investigation of orientation gradients in pearlite in hypoeutectoid steel by use of orientation imaging microscopy10.1002/srin.200705857 ↗
43. Rollett · 2004
44. Dynamics of tempering processes in stainless steel10.2495/MC170191 ↗
45. One-step annealing optimizes strength-ductility tradeoff in pearlitic steel wires10.1016/j.msea.2019.04.086 ↗
46. Gridnev · 1975 · 201 · 201
47. Atomic-scale mechanisms of deformation-induced cementite decomposition in pearlite10.1016/j.actamat.2011.03.022 ↗
48. Effect of niobium and coiling and annealing temperatures on the microstructure, mechanical properties, and bake hardening of ultralow-carbon steels for the automotive industry10.1023/A:1019666003371 ↗
49. Formation of fine cementite precipitates by static annealing of equal-channel angular pressed low-carbon steels10.1016/S1359-6454(01)00165-3 ↗
50. Microstructure and crystallographic texture of an ultrafine grained C-Mn steel and their evolution during warm deformation and annealing10.1016/j.actamat.2004.10.051 ↗