journal article·2003-12

Quantification of the Laves phase in advanced 9–12% Cr steels using a standard SEM

G. Dimmler, P. Weinert, E. Kozeschnik, H. Cerjak

Materials Characterization· Volume 51· Issue 5
Publisher page

Abstract

Abstract The precipitates in 9–12% Cr steels are usually quantified using the TEM/EFTEM method in combination with an image analysis routine. Because of the limited spatial area of investigation, a complete statistical quantification and description of Laves-phase precipitation, based on this method, is not possible. To compensate the limited magnification range, a technique has been developed to measure larger particles also using a standard scanning electron microscope (SEM). To enable the scanning of a large specimen area, a special preparation technique, in combination with a self-developed quantification routine, was applied. The growth and coarsening of the Laves phase was investigated for several advanced 9–12% Cr heat-resistant steels at 600 and 650 °C. The results are compared with published values obtained from (partly) different measuring techniques as well as to thermodynamic equilibrium calculations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Quantification of precipitates in advanced creep resistant 9–12% Cr steels10.1002/srin.199805562 ↗
2. Future ferrite steels for high-temperature service
3. Stocker Chr. Auswirkungen der Ausscheidungskinetik auf das Kriechverhalten Mo- und B-legierter 9% Cr-Stähle. PhD Thesis, ARC-Seibersdorf, TU Vienna; 2002.
4. Wachter O, Ennis PJ, Czyrska-Filemonowicz A, Zielinska-Liepic A, Nickel H. Untersuchung der Eigenschaften des 9–12% Chromstahles vom Typ 9Cr-0,5Mo-1,8W,V,Nb im Hinblick auf seine Verwendung als Rohrleitungs-und Kesselbaustahl unter erhöhten Temperaturen. KFA rep. Jül-3074, Jülich; 1995.
5. Precipitation behaviour of Laves phase and it's effect on toughness of 10Cr–2Mo ferritic-martensitic steel
6. Effect of Mo and Si on Laves phase precipitation in 10% Cr-steels
7. Aging phenomena before the precipitation of the bulky Laves phase in Fe–19% Cr ferritic alloys10.1016/0956-716X(95)00086-B ↗
8. Metallurgy and creep properties of new 9–12% Cr steels10.1002/srin.199605503 ↗
9. Quantitative evaluation of precipitates in the martensitic cast steel G-X12CrMoWVNbN10-1-1
10. Evaluation of structural stability and creep resistance of 9–12% Cr steel10.1002/srin.199605504 ↗
11. The effect of Nb, V, N and Al on creep rupture strength of 9–12% Cr steel10.1002/srin.199501143 ↗
12. Evaluation of particle size distributions of precipitates in a 9% Cr-steel using energy filtered transmission electron microscopy10.1016/S0968-4328(00)00086-X ↗
13. Foldyna V. Microstructural stability of ferritic 9–12% chromium steels. Contract COST-94-0076.
14. Beitrag zur Quantifizierung der Entwicklung betriebsbedingter Ausscheidungen in neuen 9 bis 12% Cr-Stählen am Beispiel G-X12CrMoWVNbN-10-1-1
15. Porter · 1992 · 420
16. Guang-Jun C. Microstructure and mechanical properties of high chromium steel weld metals. PhD Thesis, Department of Physics Chalmers University of Technology, Göteborg; 1994.
17. 1983
18. Nippon Steel · 1994
19. Hanus R, COST report VOEST-ALPINE Giesserei Linz GmbH COST 522 (2000).
20. Wide-band detector for micro-microampere low-energy electron currents10.1088/0950-7671/37/7/307 ↗
21. Sample preparation for high-resolution damage examinations in the SEM10.1515/pm-2002-391202 ↗
22. Reuter · 1972 · 121
23. Goldstein · 1992
24. A comprehensive approach on the development and improvement of 9–12% Cr steels
25. Quantification of Laves phase particle size in 9CrW steel10.1016/S1044-5803(01)00159-0 ↗
26. Method of estimating size of discrete objects
27. Hättestrand M. Precipitation reactions at high temperatures in 9–12% chromium steels. PhD thesis, Department of Experimental Physics, Chalmers University of Technology, Göteborg, Schweden; 2000.
28. Effect of W on recovery of lath structure during creep of high chromium martensitic steels10.1016/S0921-5093(99)00066-0 ↗
29. MatCalc—a simulation tool for multicomponent thermodynamics, diffusion and phase transformation kinetics
30. Christian · 1965
31. Investigations and analysis on the stationary creep behaviour of 9–12% chromium ferritic martensitic steels