journal article·2006-12

Effect of matrix structure on the impact properties of an alloyed ductile iron

Gülcan Toktaş, Mustafa Tayanç, Alaaddin Toktaş

Materials Characterization· Volume 57· Issue 4-5
Publisher page

Abstract

Abstract An investigation was performed to examine the influence of the matrix structure on the impact properties of a 1.03% Cu, 1.25% Ni and 0.18% Mo pearlitic ductile iron. Specimens were first homogenized at 925 °C for 7 h and a fully ferritic structure was obtained in all ductile iron samples. Then, various heat treatments were applied to the homogenized specimens in order to obtain pearlitic/ferritic, pearlitic, tempered martensitic, lower and upper ausferritic matrix structures. The unnotched charpy impact specimens were tested at temperatures between − 80 °C and + 100 °C; the tensile properties (ultimate tensile strength, 0.2% yield strength and elongation) and the hardnesses of the matrix structures were investigated at room temperature. The microstructures and the fracture surfaces of the impact specimens tested at room temperature were also investigated by optical and scanning electron microscope. The results showed that the best impact properties were obtained for the ferritic matrix structure that had the lowest hardness, yield and tensile strength. Ductile iron with a lower ausferritic matrix had the best combination of ultimate tensile strength, percent elongation and impact energies of all structures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Effect of microstructure on the fatigue strength of an austempered ductile iron10.1007/BF00356546 ↗
2. Effect of pearlite on the vibration-fracture behavior of spheroidal graphite cast irons under resonant conditions10.1007/s11661-002-0384-y ↗
3. 1990
4. Mechanical properties of SG-iron with different matrix structure10.1023/A:1004866817049 ↗
5. Factors affecting ductile iron's impact, tensile strength
6. Effects of low temperatures on charpy impact toughness of austempered ductile irons10.1361/105994902770343728 ↗
7. Effect of austenitizing conditions on the impact properties of an alloyed austempered ductile iron of initially ferritic matrix structure10.1361/105994998770348007 ↗
8. ASTM E23-02 · 2002
9. TS 138 EN 10002-1 · 1996
10. The effect of testing temperature on fracture toughness of austempered ductile iron10.1007/s11661-001-0261-0 ↗
11. Toktas, G. Investigating the effect of matrix structure of spheroidal graphite cast iron on mechanical and fatigue properties, Ph.D. Thesis, Balikesir University, Balikesir, Turkey; 2004.
12. Tensile properties of austempered ductile iron under thermomechanical treatment10.1361/105994900770346286 ↗
13. Effect of composition and heat treatment parameters on the characteristics of austempered ductile irons10.1179/cmq.1997.36.5.289 ↗
14. Investigations on the fracture toughness of austempered ductile irons austenitized at different temperatures10.1016/S0921-5093(02)00633-0 ↗
15. Effect of austempering time on mechanical properties of a low manganese austempered ductile iron10.1361/105994900770346150 ↗
16. Development of austempered ductile cast iron (ADI) with simultaneous high yield strength and fracture toughness by a novel two-step austempering process10.1016/S0921-5093(01)01210-2 ↗
17. Influence of microalloying and heat treatment on the kinetics of bainitic reaction in austempered ductile iron10.1361/105994901770345222 ↗
18. High-strength ductile iron-as cast bainitic ductile iron and austempered ductile iron
19. Influence of austempering temperature on the characteristics of austempered ductile iron alloyed with Cu and Ni
20. Microstructure and toughness of CuNiMo austempered ductile iron10.1016/j.matlet.2004.02.041 ↗
21. Dieter · 1976