journal article·2022-01

Development of a novel testing methodology for in-situ microstructural characterisation during continuous strain path change

Sisir Dhara, Scott Taylor, Łukasz Figiel, Darren Hughes, Sumit Hazra

Publisher page

Abstract

Strain path transition is a common phenomenon during continuous stamping operations of sheet metal and can potentially alter the forming limit of the material. Enabling strain path change in a single experiment is a key challenge faced by several researchers. To understand the effect of continuous strain path change on material forming limits, detailed material characterisation is needed where the material is deformed while the strain path of the material is changed continuously. In this work, a test method was developed, which consisted of a novel mechanical rig and specimen design. The mechanism allowed DP600 steel and AA5182-O aluminium samples to change strain paths continuously without unloading the specimen. Digital image correlation measurements of the strain evolution of the samples during tests showed that the technique was able to alter the strain path of the sample from uniaxial to biaxial strain path. In particular, the measurements showed that the transition from uniaxial to biaxial strain paths was sharper in DP600 than AA5182-O. The test was repeated in a scanning electron microscope (SEM) chamber to observe the behaviour of the microstructure during the strain path transition. The microstructural strain evolution showed rotation of strain bands while the evolution of electron back scattered diffraction (EBSD) maps conveyed grain rotation during continuous strain path change in both the materials. The strain path transition controlled the rotation of grains with preferred crystallographic orientations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and mechanical properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Formability analysis of pre-strained AA5754-O sheet metal using Yld96 plasticity theory: role of amount and direction of uni-axial pre-strain10.1016/j.jmapro.2016.09.014 ↗
2. A synchrotron X-ray diffraction study of non-proportional strain-path effects10.1016/j.actamat.2016.11.011 ↗
3. Effect of continuous strain path changes on forming limit strains of DP60010.1111/str.12329 ↗
4. Investigations of the effect of strain path changes on forming limit curves using an in-plane biaxial tensile test10.1016/j.ijmecsci.2015.05.007 ↗
5. A general forming limit criterion for sheet metal forming10.1016/S0020-7403(98)00113-1 ↗
6. Review of theoretical models of the strain-based FLD and their relevance to the stress-based FLD10.1016/j.ijplas.2003.11.004 ↗
7. Path-dependence of the forming limit stresses in a sheet metal10.1016/j.ijplas.2006.05.005 ↗
8. Effect of strain hardening behavior on forming limit stresses of steel tube subjected to nonproportional loading paths10.1016/j.ijplas.2006.11.008 ↗
9. Experimental evaluation and constitutive modeling of non-proportional deformation for asymmetric steels10.1016/j.ijplas.2010.04.002 ↗
10. Coupled effects of texture, hardening and non-proportionality of strain on ductility in ferritic steel10.1016/j.commatsci.2013.03.002 ↗
11. Texture, hardening and non-proportionality of strain in BCC polycrystal deformation10.1016/j.ijplas.2013.04.008 ↗
12. Influence of the strain path changes on the formability of a zinc sheet10.1016/j.jmatprotec.2019.03.026 ↗
13. The role of plastic slip anisotropy in the modelling of strain path change effects10.1016/j.jmatprotec.2008.01.056 ↗
14. Modelling of ultra-thin steel sheet in two-stage tensile deformation considering strain path change and grain size effect and application in multi-stage microforming10.1016/j.ijmachtools.2021.103713 ↗
15. Occurence of strain path changes in a two-stage deep drawing process10.1016/j.jmatprotec.2009.09.004 ↗
16. Analysis of plastic flow localization under strain paths changes and its coupling with finite element simulation in sheet metal forming10.1016/j.jmatprotec.2009.02.008 ↗
17. Crystal plasticity-based forming limit prediction for FCC materials under non-proportional strain-path10.1016/j.msea.2010.06.063 ↗
18. Local plastic strain evolution in a high strength dual-phase steel10.1016/j.msea.2010.04.052 ↗
19. Deformation-induced microstructural banding in TRIP steels10.1007/s11661-018-4650-z ↗
20. Local behavior of an AISI 304 stainless steel submitted to in situ biaxial loading in SEM10.1016/j.msea.2017.02.087 ↗
21. Strain path diagram simulation of AA 5182 aluminum alloy10.1016/j.proeng.2013.09.205 ↗
22. Characterization of plastic anisotropy of AA5182-O sheets during prestraining and subsequent annealing10.1115/1.4040157 ↗
23. Damage-based finite element modeling of stretch flange forming of aluminium-magnesium alloy10.4028/www.scientific.net/MSF.519-521.815 ↗
24. Forming of Al 5182-O in a servo press at room and elevated temperatures10.1115/1.4030334 ↗
25. Formability assessment of prestrained automotive grade steel sheets using stress based and polar effective plastic strain-forming limit diagram10.1115/1.4030786 ↗
26. Postanneal mechanical properties of prestrained AA5182-O sheets10.1115/1.4004613 ↗
27. The effect of prestrain and subsequent annealing on the mechanical behavior of AA5182-O10.1016/j.msea.2010.12.014 ↗
28. Carvill · 1994
29. Microstructure and mechanical properties of laser welded DP600 steel joints10.1016/j.msea.2009.09.051 ↗
30. Sutton · 2009
31. GOM, GOM ARAMIS
32. LaVision
33. Damage in dual phase steel DP1000 investigated using digital image correlation and microstructure simulation10.1088/0965-0393/23/8/085005 ↗
34. Microscale plastic strain heterogeneity in slip dominated deformation of magnesium alloy containing rare earth10.1016/j.msea.2014.01.102 ↗
35. Geometrically necessary dislocation and size-dependent plasticity10.1016/S1359-6462(02)00329-9 ↗