journal article·2022-11

Changes in microstructure and mechanical properties of the carbon fiber and their effects on C/SiC composites

Jianjie Hao, Jiayan Li, Xiaolei Shi, Ping He, Wei Shi, Yi Tan

Publisher page

Abstract

The changes in microstructure and mechanical properties of the carbon fiber and their effects on C/SiC composites were studied. The H, N and O atoms escaped and the carbon content in the carbon fiber increased when the heat treatment temperature exceeds 1200 °C. Meanwhile, the growth of graphite crystallite leaded to stress concentration and reduced the tensile strength of carbon fiber to 2.98 GPa by 1200 °C heat treatment. The active atoms on the surface of the carbon fiber were reduced, thus weakening the bonding force between the carbon fiber and the pyrolytic carbon interface layer and improving the pullout mechanism of the carbon fiber. This result was also observed by synchrotron radiation X-ray computed tomography. The flexural strength of the C/SiC composite increased from 300 MPa without treatment to 364 MPa after 1600 °C heat treatment.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fiber-reinforced polymer composites · Advanced ceramic materials synthesis · Graphene research and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Delamination analysis in high speed drilling of carbon fiber reinforced plastics (CFRP) using artificial neural network model10.1016/j.matdes.2008.03.014 ↗
2. Wettability of carbon fibers modified by acrylic acid and interface properties of carbon fiber/epoxy10.1016/j.eurpolymj.2007.11.021 ↗
3. Carbon fiber surfaces and composite interphases10.1016/j.compscitech.2014.07.005 ↗
4. Oxidation behavior of PAN based carbon fiber reinforced phenolic resin matrix composites10.1023/A:1006792223737 ↗
5. Effect of new epoxy matrix for T800 carbon fiber/epoxy filament wound composites10.1016/j.compscitech.2007.01.026 ↗
6. Mechanical, thermal and interfacial performances of carbon fiber reinforced composites flavored by carbon nanotube in matrix/interface10.1016/j.compstruct.2016.10.022 ↗
7. The future of carbon-carbon composites10.1016/0008-6223(87)90116-3 ↗
8. Oxidation microstructure studies of reinforced carbon/carbon10.1016/j.carbon.2005.11.013 ↗
9. Enhancement of the oxidation resistance of C/C composites by depositing SiC nanowires onto carbon fibers by electrophoretic deposition10.1016/j.jallcom.2014.08.209 ↗
10. Ultra-high-temperature ablation behavior of SiC–ZrC–TiC modified carbon/carbon composites fabricated via reactive melt infiltration10.1016/j.jeurceramsoc.2019.10.027 ↗
11. High temperature corrosion of carbon/carbon composites in Zr–Ti melts during liquid metal infiltration10.1016/j.corsci.2015.05.014 ↗
12. Microstructures of short-carbon-fiber-reinforced SiC composites prepared by hot-pressing10.1016/j.matchar.2008.04.006 ↗
13. Non-destructive testing of satellite nozzles made of carbon fibre ceramic matrix composite, C/SiC10.1016/j.matchar.2006.09.010 ↗
14. Fibre-matrix adhesion and its relationship to composite mechanical properties10.1007/BF01151234 ↗
15. Effect of acidic anode treatment on carbon fibers for increasing fiber-matrix adhesion and its relationship to interlaminar shear strength of composites10.1023/A:1004754100310 ↗
16. Microstructural investigations of the pyrocarbon interphase in SiC fiber-reinforced SiC matrix composites10.1016/j.matlet.2009.06.040 ↗
17. Effects of BN/SiC dual-layer interphase on mechanical and dielectric properties of SiCf/SiC composites10.1016/j.ceramint.2013.09.091 ↗
18. Atmospheric pressure plasma surface modification of carbon fibres10.1088/1742-6596/100/1/012002 ↗
19. The research on the interfacial compatibility of polypropylene composite filled with surface treated carbon fiber10.1016/j.apsusc.2009.06.053 ↗
20. Effects of Twaron fiber surface treatment by air dielectric barrier discharge plasma on the interfacial adhesion in fiber reinforced composites10.1016/j.surfcoat.2010.04.049 ↗
21. Effect of chemical vapor deposition treatment of carbon fibers on the reflectivity of carbon fiber-reinforced cement-based composites10.1016/j.compscitech.2007.08.003 ↗
22. Comparison of chemical vapor deposition and chemical grafting for improving the mechanical properties of carbon fiber/epoxy composites with multi-wall carbon nanotubes10.1007/s10853-012-7119-2 ↗
23. Compressive and interlaminar shear properties of carbon/carbon composite laminates reinforced with carbon nanotube-grafted carbon fibers produced by injection chemical vapor deposition10.1016/j.msea.2014.12.044 ↗
24. Chemically grafting carbon nanotubes onto carbon fbers by Poly(acryloyl chloride) for enhancing interfacial strength in carbon fiber/unsaturated polyester composites10.1007/s12221-014-0659-0 ↗
25. Improving the interfacial strength of silicone resin composites by chemically grafting silica nanoparticles on carbon fiber10.1016/j.compscitech.2017.10.020 ↗
26. Chemically grafting carbon nanotubes onto carbon fibers for enhancing interfacial strength in carbon fiber/HDPE composites10.1002/sia.6425 ↗
27. Enhancing the fracture resistance of carbon fiber reinforced SiC matrix composites by interface modification through a simple fiber heat-treatment process10.1016/j.carbon.2016.08.047 ↗
28. Influence of heat treatment on physical–chemical properties of PAN-based carbon fiber10.1016/j.ceramint.2005.02.014 ↗
29. Correlation between graphite crystallite distribution morphology and the mechanical properties of carbon fiber during heat treatment10.1016/j.matlet.2011.07.057 ↗
30. Effect of heat treatment on carbon fiber surface properties and fibers/epoxy interfacial adhesion10.1016/j.apsusc.2011.04.129 ↗
31. The effect of heat treatment temperature and time on the microstructure and mechanical properties of PAN-based carbon fibers10.1007/s10853-013-7762-2 ↗
32. Effect of epoxy coatings on carbon fibers during manufacture of carbon fiber reinforced resin matrix composites10.1016/j.matdes.2009.09.034 ↗
33. Surface analysis of unsized and sized carbon fibers10.1016/S0008-6223(98)00300-5 ↗
34. Stabilization and carbonization of Pan-based carbon-fibers as related to mechanical-properties10.1016/0008-6223(91)90129-7 ↗
35. Denitrogenation behavior and tensile strength increase during carbonization of stabilized pan fibers10.1016/S0008-6223(98)00113-4 ↗
36. Chemical structure evolution and mechanism during pre-carbonization of PAN-based stabilized fiber in the temperature range of 350–600°C10.1016/j.polymdegradstab.2007.05.020 ↗
37. Tensile failure phenomena in carbon fibres10.1016/j.carbon.2016.06.037 ↗
38. Nanocomposite microstructures dominating anisotropic elastic modulus in carbon fibers10.1016/j.actamat.2018.12.029 ↗
39. The effect of nanostructure upon the deformation micromechanics of carbon fibres10.1016/j.carbon.2012.09.047 ↗
40. Factors controlling the strength of carbon fibres in tension10.1016/j.compositesa.2013.11.007 ↗
41. Residual thermal stresses in carbon/carbon–Zr–Ti–C composites and their effects on the fracture behavior of composites with different preforms10.1016/j.carbon.2014.09.094 ↗