Investigation on corrosion behavior and mechanical properties of an extruded Mg-Zn-Al-Sn-Mn alloy
Source abstract
Abstract
Abstract Mg alloy with the alloying elements of Zn, Al, Sn and Mn was designed, and hot extrusion was carried out under various extrusion speeds and temperatures. The microstructure was well characterized, and the mechanical properties as well as corrosion resistance were tested. The results showed that the high speed extrusion resulted in more second phase particles, an increase in fraction of dynamic recrystallized (DRXed) grains, and a weaker basal plane texture. Moreover, high extrusion temperature increased the number of second phases, grain size, and DRX degree, while decreased the strength of basal plane texture. The sample extruded under the speed of 10 mm/min and temperature of 300 °C exhibited the highest yield strength (YS) and ultimate tensile strength (UTS), and the best corrosion resistance. High extrusion temperature could reduce the strength, while increase the elongation (EL). The corrosion resistance was improved greatly by grain refinement, while it became worse by increasing the number of fine and dispersed second phase particles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Turning a native or corroded Mg alloy surface into an anti-corrosion coating in excited CO210.1038/s41467-018-06433-5 ↗
2. Achieving three-layered Al/Mg/Al sheet via combining porthole die co-extrusion and hot forging10.1016/j.jma.2020.02.016 ↗
3. Designing a magnesium alloy with high strength and high formability10.1038/s41467-018-04981-4 ↗
4. A new concept for corrosion inhibition of magnesium: suppression of iron re-deposition10.1016/j.elecom.2015.10.023 ↗
5. Microstructure and corrosion behavior of as-extruded Mg-xLi-3Al-2Zn-0.2Zr alloys (x = 5, 8, 11 wt.%)10.1016/j.corsci.2020.108487 ↗
6. Corrosion behaviour of AZ31 magnesium alloy with different grain sizes in simulated biological fluids10.1016/j.actbio.2009.04.041 ↗
7. Effects of grain size on the corrosion resistance of wrought magnesium alloys containing neodymium10.1016/j.corsci.2012.01.021 ↗
8. The surface, microstructure and corrosion of magnesium alloy AZ31 sheet10.1016/j.electacta.2010.02.068 ↗
9. Corrosion of hot extrusion AZ91 magnesium alloy: I-relation between the microstructure and corrosion behavior10.1016/j.corsci.2011.02.015 ↗
10. Revealing the relationship between grain size and corrosion rate of metals10.1016/j.scriptamat.2010.08.035 ↗
11. Crystallographic orientation and electrochemical activity of AZ31 Mg alloy10.1016/j.elecom.2010.05.011 ↗
12. Effect of grain size and crystal orientation on the corrosion behavior of as-extruded Mg-6Gd-2Y-0.2Zr alloy10.1016/j.corsci.2019.108338 ↗
13. Electrochemical behavior of mg-Al-Zn-in alloy as anode materials in 3.5wt.% NaCl solution10.1016/j.electacta.2017.03.119 ↗
14. Effect of extrusion on corrosion properties of Mg-2Ca-χAl (χ=0, 2, 3, 5) alloys10.1016/j.corsci.2017.08.014 ↗
15. Influence of zinc on the microstructure, mechanical properties and in vitro corrosion behavior of magnesium-zinc binary alloys10.1016/j.jallcom.2015.06.227 ↗
16. Low hydrogen release behavior and antibacterial property of Mg-4Zn-xSn alloys10.1016/j.matlet.2019.01.048 ↗
17. Mechanistic understanding of the corrosion behavior of Mg4Zn0.2Sn alloys: from the perspective view of microstructure10.1016/j.corsci.2020.108863 ↗
18. Effect of manganese on discharge and corrosion performance of magnesium alloy AP65 as anode for seawater-activated battery10.5006/0010-9312-68.5.388 ↗
19. Unexpected influence of Mn addition on the creep properties of a cast Mg–2Al–2Ca (mass%) alloy10.1016/j.actamat.2011.08.049 ↗
20. Dynamic precipitation, microstructure and mechanical properties of Mg-5Zn-1Mn alloy sheets prepared by high strain-rate rolling10.1016/j.matdes.2016.03.129 ↗
21. Effect of manganese on grain refinement of Mg–Al based alloys10.1016/j.scriptamat.2006.02.020 ↗
22. Microstructure and mechanical properties of Mg–Al–Mn–Ca alloy sheet produced by twin roll casting and sequential warm rolling10.1016/j.jallcom.2010.07.183 ↗
23. Strong and ductile age-hardening Mg-Al-Ca-Mn alloy that can be extruded as fast as aluminum alloys10.1016/j.actamat.2017.03.046 ↗
24. Designing a magnesium alloy with high strength and high formability10.1038/s41467-018-04981-4 ↗
25. Effect of extrusion speed on microstructure and mechanical properties of the Mg-Ca binary alloy10.1016/j.jma.2020.05.011 ↗
26. The relation between microstructure and corrosion behavior of AZ80 Mg alloy following different extrusion temperatures10.1016/j.corsci.2008.03.003 ↗
27. A thermodynamic description of the Al-Mg-Zn system10.1007/s11661-997-0104-8 ↗
28. The influence of mischmetal and tin on the microstructure and mechanical properties of Mg–6Zn–5Al-based alloys10.1016/j.actamat.2007.10.042 ↗
29. Strain-induced dynamic precipitation of Mg17Al12 phases in Mg–8Al alloys sheets rolled at 748K10.1016/j.msea.2015.03.112 ↗
30. Effect of aging prior to extrusion on the microstructure and mechanical properties of mg–7Sn–1Al–1Zn alloy10.1016/j.jallcom.2014.11.213 ↗
31. Microstructure and mechanical properties of Mg-Al-Zn alloy extruded by porthole die with different initial billets10.1016/j.msea.2018.01.129 ↗
32. Microstructure, texture and mechanical properties of Mg-3.0Zn-0.2Ca alloys fabricated by extrusion at various temperatures10.1016/j.jallcom.2015.08.215 ↗
33. Microstructure and mechanical properties of Mg-Zn-Ca-Zr alloy fabricated by hot extrusion-shearing process10.1016/j.msea.2020.139937 ↗
34. Influence of second-phase precipitates on the texture evolution of Mg–Al–Zn alloys during hot deformation10.1016/j.scriptamat.2011.10.028 ↗
35. Optimization of mechanical and damping properties of Mg–0.6Zr alloy by different extrusion processing10.1016/j.jma.2015.02.001 ↗
36. Comparison of microstructure and mechanical properties of mg-Zn microalloyed with ca or Ce10.1016/j.vacuum.2018.02.029 ↗
37. Microstructure and mechanical properties of AZX912 magnesium alloy extruded at different temperatures10.1016/j.msea.2016.10.032 ↗
38. The electrochemical corrosion of pure magnesium in 1 N NaCl10.1016/S0010-938X(96)00172-2 ↗
39. Influence of microstructure on the corrosion of diecast AZ91D10.1016/S0010-938X(98)00121-8 ↗
40. On the corrosion behaviour of magnesium and its alloys using electrochemical techniques10.1016/S0378-7753(96)02456-1 ↗
41. Corrosion of hot extrusion AZ91 magnesium alloy. Part II: effect of rare earth element neodymium (Nd) on the corrosion behavior of extruded alloy10.1016/j.corsci.2011.05.035 ↗
42. AC impedance spectroscopy study of the corrosion behavior of an AZ91 magnesium alloy in 0.1 M sodium sulfate solution10.1016/j.electacta.2006.10.007 ↗
43. Effect of grain size on corrosion: a review10.5006/1.3462912 ↗
44. Enhanced corrosion resistance of Mg alloy ZK60 after processing by integrated extrusion and equal channel angular pressing10.1016/j.actamat.2011.06.033 ↗
45. Formation of abnormal coarse grains and its effects on corrosion behaviors of solution treated ZK60 Mg alloy10.1016/j.corsci.2020.109201 ↗