Investigation into microstructure evolution, mechanical properties and corrosion resistance of Al-Zn-Mg-Cu alloy after hot forming quenching integrated process with warm die
Source abstract
Abstract
The growing severity of environmental challenges has intensified the transportation sector's shift toward lightweight materials for ecological preservation and energy conservation. Among these solutions, high-strength Al-Zn-Mg-Cu series aluminum alloys have emerged as a focal point in materials research, demonstrating exceptional potential for sustainable industrial applications. In this study, the pre-ageing and baking treatment after hot form and quench process (HFQ) with warm die were designed to achieve the balance between strength and corrosion resistance for Al-Zn-Mg-Cu alloy. The findings suggest that pre-HFQ treatment with warm die promotes the generation of high density dislocation, inducing the formation of large-sized grain boundary precipitation (GBP) with high Cu content, and expanding GBP space and precipitation free zone (PFZ), which are responsible for the improvement of corrosion resistance. The maximum corrosion depth was reduced to 21.18 μm form the initial 61.86 μm of the as-received alloy during the accelerated inter-granular corrosion (IGC) test. The EXCO morphology is mainly dominated by slight local IGC and pitting, which is close to the similar condition of retrogression and re-ageing (RRA).High temperature (160 °C) pre-ageing accelerates the nucleation of GP zones, and baking treatment (180 °C/30 min) facilitates the transformation of GP zones to η', which is beneficial to the enhancement of strength.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Recent developments in advanced aircraft aluminium alloys10.1016/j.matdes.2013.12.002 ↗
2. Recent development in aluminium for automotive applications10.1016/S1003-6326(14)63305-7 ↗
3. Allwood · 2012
4. Investigations into hot form quench conditions on microstructure evolution and bake-hardening response for high-strength aluminum alloy10.1007/s11665-020-05245-3 ↗
5. Effects of high temperature pre precipitation on mechanical and corrosion behavior of an Al-Zn-Mg-Cu alloy10.1016/j.jallcom.2024.173738 ↗
6. Correlations between stress corrosion cracking susceptibility and grain boundary microstructures for an Al-Zn-Mg alloy10.1016/j.corsci.2013.07.032 ↗
7. The effect of quench rate and overageing temper on the corrosion behavior of AA705010.1016/j.corsci.2013.10.010 ↗
8. The effect of initial temper on the corrosion resistance for Al-Zn-Mg-cu alloy10.1016/j.corsci.2022.110730 ↗
9. Effects of different aging treatments on microstructures and mechanical properties of Al-Cu-Li alloy joints welded by electron beam welding10.1016/j.cja.2017.07.002 ↗
10. Revealing the mechanisms of exfoliation corrosion and stress corrosion cracking for an Al-Zn-Mg-Cu alloy after continuous retrogression and re-ageing treatment10.1016/j.corsci.2024.112474 ↗
11. Corrosion behaviour of different tempers of AA7075 aluminum alloy10.1016/j.electacta.2004.01.046 ↗
12. Simulation study on function mechanism of some precipitates in localized corrosion of al alloys10.1016/j.corsci.2006.12.002 ↗
13. Influence of dual retrogression and reaging temper on microstructure, strength and exfoliation corrosion behavior of Al-Zn-Mg-cu alloy10.1016/S1003-6326(11)61248-X ↗
14. Stress corrosion behavior and microstructure analysis of Al-Zn-Mg-Cu alloys fabricated by CMT wire arc additive manufacturing with different post-treatments
15. Enhancing mechanical and corrosion properties of Al-Zn-Mg-Cu alloy through electropulsing and aging alternate treatment10.1016/j.matchar.2024.114485 ↗
16. In-situ rolling friction stir welding of aluminum alloys towards corrosion resistance10.1016/j.corsci.2024.111920 ↗
17. Investigation of microstructure and corrosion resistance of an Al-Zn-Mg-Cu, alloy under various ageing conditions10.1016/j.corsci.2023.111719 ↗
18. Enhancing the corrosion resistance of high-strength Al-Zn-Mg-cu alloys after equal channel angular pressing by developing retrogression and re-aging strategies10.1016/j.corsci.2025.112736 ↗
19. Effects of stress aging treatment on the microstructure, mechanical properties and electrochemical corrosion behavior of Al-Zn-Mg-Cu alloy10.1016/j.jallcom.2024.174686 ↗
20. Enhanced plasticity and corrosion resistance of high strength Al-Zn-Mg-Cu alloy processed by an improved thermomechanical processing10.1016/j.jallcom.2017.05.047 ↗
21. Lin · 2008
22. Application of hot forming cold die quenching for facilitating equal channel angular pressing of AA2024 aluminum alloy10.1016/j.jallcom.2019.03.059 ↗
23. An indirect hot form and quench (HFQ) for manufacturing components of aluminum alloy sheets and comparison with direct HFQ10.1016/j.ijmachtools.2023.104073 ↗
24. The effect of hot form quench (HFQ®) conditions on precipitation and mechanical properties of aluminium alloys10.1016/j.msea.2019.06.027 ↗
25. Numerical study of the solution heat treatment, forming, and in-die quenching (HFQ) process on AA575410.1016/j.ijmachtools.2014.07.008 ↗
26. ASTM Standard G110-92 · 2003
27. Precipitation sequences during quenching of the AA7010 alloy10.1016/S1359-6454(02)00063-0 ↗
28. Investigation of quench sensitivity of high strength Al-Zn-Mg-Cu alloys by time-temperature-properties diagrams10.1016/j.matdes.2009.12.038 ↗
29. Chemical kinetics of water-rock interactions10.1029/JB089iB06p04009 ↗
30. Effect of different quenching processes following solid-solution treatment on properties and precipitation behaviors of 7050 alloy10.1016/S1003-6326(18)64861-7 ↗
31. Harrison · 2017
32. Optimizing the bake hardening behavior of al7075 using response surface methodology10.1016/j.matdes.2009.11.014 ↗
33. Bake hardening of nanograin AA7075 aluminum alloy10.1016/j.msea.2011.10.031 ↗
34. Modelling of the age hardening behaviour of Al–Mg–Si alloys10.1016/S1359-6454(00)00301-3 ↗
35. Role of grain-boundary precipitates and solute-depleted zone on the intergranular corrosion of aluminum alloy 715010.5006/1.3287699 ↗
36. Correlations between intergranular stress corrosion cracking, grain-boundary microchemistry, and grain-boundary electrochemistry for Al-Zn-Mg-Cu alloys10.1016/j.corsci.2010.08.024 ↗
37. The effect of copper content and heat treatment on the stress corrosion characteristics of AI-6Zn-2Mg-XCu alloys10.1007/BF02643806 ↗
38. Some effects of alloy composition on stress corrosion cracking in Al-Zn-Mg-Cu alloys10.1016/j.corsci.2015.05.016 ↗
39. Effect of cu content on corrosion behavior of 7xxx series aluminum alloys10.1149/1.1695385 ↗
40. Investigation of mechanical and corrosion properties of an Al-Zn-Mg-Cu alloy under various ageing conditions and interface analysis of eta’ precipitate10.1016/j.matdes.2015.06.183 ↗
41. Influence of retrogression and re-aging treatment on corrosion behaviour of an Al-Zn-Mg-Cu alloy10.1016/j.matdes.2010.11.036 ↗
42. Evidence for dislocation transport of hydrogen in aluminum10.1007/BF02642394 ↗
43. Study on hydrogen-assisted stress corrosion cracking behavior of 7050 aluminum alloy10.1016/j.jmrt.2025.02.253 ↗
44. Effect of heat treatment on microstructure, mechanical properties and corrosion behavior of LACSed 7075 deposits10.1016/j.matchar.2024.114424 ↗
45. Improving mechanical anisotropy and corrosion resistance of extruded AA7075 alloy by warm cross rolling and annealing10.1016/j.jallcom.2021.158725 ↗
46. Inhibiting segregation enabled outstanding combination of mechanical and corrosion properties in precipitation-strengthened aluminum alloys10.1016/j.jmst.2023.06.067 ↗