journal article·2016-10

Strengthening effect of in situ TiC particles in Ti matrix composite at temperature range for hot working

Fengcang Ma, Zhongbing Shi, Ping Liu, Wei Li, Xinkuan Liu, Xiaohong Chen, Daihua He, Ke Zhang, Deng Pan, Di Zhang

Publisher page

Abstract

Abstract In this work, hot-working behavior of Ti matrix composite reinforced with TiC particles was investigated by means of hot compression tests and metallographic techniques. The strengthening effect of TiC particles on flow stress was measured. It was found that there is an about 100 K increase in βt of the 5 vol.% in situ TiC reinforced Ti-1100 composite compared to that of the monolithic Ti-1100 alloy. The incorporation of TiC particles increased the flow stress significantly. Sharp decreases in flow stress are observed at 10 − 1 s − 1 or 10 − 2 s − 1 strain rates and 1373 K or 1423 K during hot compression. An improved model was used to characterize the strengthening effect of ceramic reinforcement in term of threshold stress. The calculated values of deformation activation energy and threshold stress vary with test temperature from 1273 to 1423 K, and the threshold stress of the composite decreases from 70 MPa to 18 MPa. Besides the effect of temperature, the great variation of threshold stress may result from the transformation of αphase to βphase partly.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. A review on particulate reinforced titanium matrix composites
2. Selective laser melting of titanium alloys and titanium matrix composites for biomedical applications: a review10.1002/adem.201500419 ↗
3. Creep rupture life of in situ synthesized (TiB+TiC)/Ti matrix composites10.1016/S1359-6462(01)00926-5 ↗
4. Thermal stability and crystallization kinetics of mechanically alloyed TiC∕Ti-based metallic glass matrix composite10.1063/1.2234535 ↗
5. Selective laser melting of in situ titanium–titanium boride composites: processing, microstructure and mechanical properties10.1016/j.actamat.2014.05.022 ↗
6. Superplasticity of fine TiC and TiN dispersed Ti–6Al–4V alloy composites10.4028/www.scientific.net/MSF.170-172.549 ↗
7. Steady state creep behaviour of TiC particulate reinforced Ti–6Al–4V composite10.1016/S0921-5093(98)00617-0 ↗
8. Steady state creep behaviour of particulate-reinforced titanium matrix composites10.1016/1359-6454(95)00242-1 ↗
9. Creep rupture of a silicon carbide reinforced aluminum composite10.1007/BF02644396 ↗
10. Superplastic behavior of in situ synthesized (TiB+TiC)/Ti matrix composite10.1016/j.scriptamat.2005.01.049 ↗
11. Quantification of the strengthening effect of reinforcements during hot deformation of aluminum-based composites10.1016/j.matdes.2014.09.029 ↗
12. Hot deformation behavior of in situ nano ZrB2 reinforced 2024Al matrix composite10.1016/j.compscitech.2015.05.006 ↗
13. Hot deformation behavior and processing maps of fine-grained SiCp/AZ91 composite10.1016/j.matdes.2014.11.006 ↗
14. Effect of TiC particles on the hot-deformation behavior of in-situ Ti matrix composite
15. Analysis of the creep behavior of silicon carbide whisker reinforced 2124 Al (T4)10.1007/BF02646227 ↗
16. Creep deformation characteristics of discontinuously reinforced aluminium-matrix composites10.1016/S0266-3538(01)00018-5 ↗
17. Unified interpretation of threshold stresses in the creep and high strain rate superplasticity of metal matrix composites10.1016/S1359-6454(99)00219-0 ↗
18. Investigation of creep threshold stresses using in situ TEM straining experiment in an Al-5Y2O3-10SiC composite
19. P-phase precipitation and its effect on martensitic transformation in (Ni,Pt)Ti shape memory alloys10.1016/j.actamat.2011.11.043 ↗
20. Rosenberg · 1968 · 851
21. Villars · 1995 · 3 · 2907
22. Thermomechanical processing of alpha titanium alloys - an overview10.1016/S0921-5093(98)01155-1 ↗
23. Hot deformation behavior of Al18B4O3w/ZK60 magnesium matrix composite10.1016/j.msea.2008.03.010 ↗
24. Fabrication technology and material characterization of carbon fibre reinforced magnesium10.1016/j.jmatprotec.2005.04.023 ↗
25. Unsteady flow softening behaviour of near beta Ti alloy TLM during hot deformation10.1179/1743284713Y.0000000393 ↗
26. Ray · 1997 · 201
27. Prasad · 1997 · 459
28. Enhanced superplasticity and strength in modified Ti–6Al–4V alloys10.1007/BF02668895 ↗
29. Processing map for the hot working of near-α titanium alloy 68510.1016/S0924-0136(97)00102-7 ↗
30. Group theory description of transformation pathway degeneracy in structural phase transformations10.1016/j.actamat.2016.01.027 ↗
31. Hot deformation behavior of SiCp/AZ91 magnesium matrix composite fabricated by stir casting10.1016/j.msea.2008.05.046 ↗
32. Creep behavior of discontinuous SiC–Al composites10.1016/0921-5093(90)90004-M ↗