journal article·2016-06

Creep study of mechanisms involved in low-temperature superplasticity of UFG Ti-6Al-4V processed by SPD

Petr Kral, Jiri Dvorak, Wolfgang Blum, Egor Kudryavtsev, Sergey Zherebtsov, Gennady Salishchev, Marie Kvapilova, Vaclav Sklenicka

Publisher page

Abstract

Abstract The deformation kinetics of ultrafine-grained Ti-6Al-4V with mean (sub)grain size about 150 nm (produced by isothermal multiaxial forging) and superplastic properties at the relatively low temperature of 873 K was investigated in compression and tension over a large range of strain rates from 10 − 7 to 10 − 2 s − 1 . Electron microscopic observations showed that the grains coarsen during deformation towards the quasi-stationary spacing w qs of strain induced boundaries. In spite of the grain coarsening the grains were generally smaller than w qs allowing high-angle boundaries to dominate the quasi-stationary strength. Texture measurements indicate that dislocation glide plays a large role in deformation. Glide in this alloy is significantly influenced by solid solution strengthening leading to a stress sensitivity of strain rate of n = 3. The present ultrafine-grained Ti alloy displays a stress sensitivity exponent n = 2 over an extended stress range where its superplastic behavior is optimal. While the deformation kinetics of present ultrafine-grained Ti alloy can be roughly explained by the traditional formula for superplastic flow, the significant discrepancy to the measured values suggests that solid solution strengthening must be taken into account to get a complete insight.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Kaibyshev · 1992
2. Submicrocrystalline and nanocrystalline structure formation in materials and search for outstanding superplastic properties10.4028/www.scientific.net/MSF.170-172.121 ↗
3. Low temperature superplasticity of Ti-6Al-4V processed by warm multidirectional forging10.4028/www.scientific.net/MSF.735.253 ↗
4. Diffusion in the Ti-Al system10.1016/S1359-6454(99)00400-0 ↗
5. A compilation and analysis of data for the stress dependence of the subgrain10.1016/0025-5416(86)90265-X ↗
6. Modeling of work hardenning and stress saturation in FCC metals10.1016/S0079-6425(97)00032-7 ↗
7. A simple dislocation model of deformation resistance of ultrafine-grained materials explaining hall–Petch strengthening and enhanced strain rate sensitivity10.1016/j.actamat.2008.12.041 ↗
8. Corrigendum to: “a simple dislocation model of deformation resistance of ultrafine-grained materials explaining Hall-Petch strengthening and enhanced strain rate sensitivity”10.1016/j.actamat.2011.05.032 ↗
9. Effect of grain refinement by ECAP on creep deformation resistance in the transition from coarse-grained to ultrafine-grained Cu by severe plastic deformation up to 24 passes of ECAP10.1016/j.msea.2011.08.010 ↗
10. Deformation kinetics of ultrafine-grained Cu and Ti10.1016/j.msea.2005.08.107 ↗
11. Nieh · 1997
12. In situ study of microstructure and strength of severely predeformed pure Cu in deformation at 573K10.1080/14786435.2015.1096025 ↗
13. Kassner · 2009
14. Superplastic tensile characteristics of in situ TiBw/Ti6Al4V composites with novel network microstructure10.1016/j.msea.2013.05.076 ↗
15. Mechanisms behind the superplastic behaviour of as-extruded TiBw/Ti6Al4V composites with a network architecture10.1016/j.matchar.2015.03.036 ↗
16. Influence of magnesium on grain refinement and ductility in a dilute Al-Sc alloy10.1016/S1359-6454(01)00262-2 ↗
17. Achieving superplasticity in ultrafine-grained copper: influence of Zn and Zr additions10.1016/S0921-5093(02)00868-7 ↗
18. Strength and ductility-related properties of ultrafine grained two-phase titanium alloy produced by warm multiaxial forging10.1016/j.msea.2011.12.102 ↗
19. Eisenlohr · 2006
20. Frost · 1982
21. Seventy-five years of superplasticity: historic developments and new opportunities10.1007/s10853-009-3780-5 ↗
22. Superplasticity in the Ti–6Al–7Nb alloy processed by high-pressure torsion10.1016/j.msea.2015.06.020 ↗
23. Grain boundary sliding revisited: developments in sliding over four decades10.1007/s10853-006-6476-0 ↗
24. Breutinger · 2006
25. Review: achieving superplastic properties in ultrafine-grained materials at high temperatures10.1007/s10853-015-9176-9 ↗
26. Understanding creep – a review10.1007/s11661-002-0090-9 ↗
27. Steady-state creep of crystals10.1063/1.1722604 ↗
28. W. Blum, 1993, High-temperature deformation and creep of crystalline solids, In H. Mughrabi, editor, Plastic Deformation and Fracture of Materials, volume 6 of Materials Science and Technology, ed. by R. W. Cahn, P. Haasen and E. J. Kramer, pages 359–405, Weinheim, VCH Verlagsgesellschaft.
29. Deformation kinetics of coarse-grained and ultrafine-grained commercially pure Ti
30. Super plasticity solution alloys and Newtonian-viscous flow in fine-grained class I solid solution alloys10.2355/isijinternational.31.76 ↗
31. Effect of grain refinement by ECAP on creep of pure Cu10.1016/j.msea.2013.10.022 ↗