Microstructure, oxidation resistance and high-temperature strength of a new class of 3D open‐cell nickel-based foams
Source abstract
Abstract
Abstract The 3D reticulated Ni–Cr–Fe alloy foams with 34–36 wt.% Cr and 20–24 wt.% Fe were synthesized by co-deposition of chromium and iron onto open–cell nickel foams, and then were homogenized to remove concentration gradients. Emphasis was placed on the research on the oxidation resistance behavior of newly developed Ni–Cr–Fe alloy foams with changing alloy composition, and the results were compared with those of Ni-25Cr and bare nickel foams at 800–1000 °C. The room and high-temperature compression behavior of Ni–Cr–Fe alloy foams was also examined, respectively. The results show that the Ni–36Cr–24Fe alloy foam exhibits the best oxidation resistance among the Ni–34Cr–20Fe, Ni–35Cr–22Fe, Ni–25Cr and bare nickel foams after oxidation at 1000 °C for 120 h. As the Cr and Fe contents increase, the yield stress and the plateau stress of the Ni–Cr–Fe alloy foams increase during the room and high-temperature compression tests. Whereas the compressive strength of the Ni–Cr–Fe alloy foams decreases with the increasing temperature at the same strain rate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · High-Temperature Coating Behaviors · Polymer Foaming and Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Mechanical properties of reticulated aluminium foams with electrodeposited Ni–W coatings10.1016/j.scriptamat.2008.03.035 ↗
2. Deformation and energy absorption properties of powder-metallurgy produced Al foams10.1016/j.msea.2011.05.031 ↗
3. Microstructural characterization of oxide morphologies on Ni and Inconel foams exposed to concentrated solar radiation10.1016/j.jallcom.2010.02.153 ↗
4. Ni–Mo–Cr foams processed by casting replication of sodium aluminate preforms10.1002/adem.200700300 ↗
5. Behavior of closed cell aluminium foams upon compressive testing at elevated temperatures: experimental results10.1016/j.matlet.2006.11.046 ↗
6. Synthesis of open-cell metal foams by templated directed vapor deposition10.1557/JMR.2001.0143 ↗
7. Oxidation limited lifetime of ni-base metal foams in the temperature range 700–900°C10.1002/adem.201000139 ↗
8. A new class of high temperature and corrosion resistant nickel-based open-cell foams10.1002/adem.200800088 ↗
9. Mechanical properties of oxidation-resistant Ni–Cr foams10.1016/S0921-5093(04)00814-7 ↗
10. Synthesis, structure, and mechanical properties of Ni–Al and Ni–Cr–Al superalloy foams10.1016/j.actamat.2003.11.012 ↗
11. Application of a manufacturing model for the optimization of additive processing of Inconel alloy 69010.1016/S0924-0136(98)00412-9 ↗
12. Tensile properties of open-cell nickel foams10.1016/j.matdes.2009.10.018 ↗
13. Synthesis of stochastic open cell Ni-based foams10.1016/j.scriptamat.2003.10.016 ↗
14. Influence of chromium and impurities on the grain-refining behavior of aluminum10.1007/BF02648967 ↗
15. Multifunctionality of cellular metal systems10.1016/S0079-6425(98)00004-8 ↗
16. Nickel foams with oxidation-resistant coatings formed by combustion synthesis10.1016/j.scriptamat.2008.01.014 ↗
17. High-temperature oxidation performance of a new alumina-forming Ni–Fe–Cr–Al alloy in flowing air10.1016/j.ijhydene.2010.04.099 ↗
18. Oxidation behavior of Ti3SiC2 at high temperature in air10.1016/S0921-5093(02)00210-1 ↗
19. Determination of thermodynamics and kinetics of point defects in NiO using the Rosenburg method10.1016/S0167-2738(98)00177-5 ↗
20. Wear and oxidation behaviour of high-chromium white cast irons10.1016/j.matchar.2007.05.021 ↗
21. Strain rate effects on the compressive property and the energy-absorbing capacity of aluminum alloy foams10.1016/S1044-5803(02)00194-8 ↗
22. Strain rate sensitivity of a closed-cell aluminium foam10.1016/S0921-5093(99)00750-9 ↗
23. The effects of strain rate, density, and temperature on the mechanical properties of polymethylene diisocyanate (PMDI)-based rigid polyurethane foams during compression10.1007/s10853-008-3105-0 ↗