Microstructural evolution, mechanical properties and superelasticity behavior in ultrasonic spot welding NiTi with Cu interlayer
Source abstract
Abstract
The microstructural evolution of NiTi shape memory alloy (SMA) with Cu interlayer joints fabricated by ultrasonic spot welding (USW) was thoroughly investigated using transmission electron microscopy (TEM) and Transmission Kikuchi Diffraction (TKD). Furthermore, an analysis was conducted on how these microstructural changes influence the behavior of superelasticity. Significant plastic deformation and element diffusion occur during the USW process, leading to the formation of dislocation entanglements, Ti(Ni 0.5Cu 0.5), Ni 3-xCu xTi phases, and NiTiCu 2O 4 nano-oxide in the vicinity of the interface. According to high-resolution transmission electron microscopy (HRTEM) results, there exists a crystallographic orientation relationship (ORs) between Cu and Ti(Ni 0.5Cu 0.5): [011]Cu//[100]Ti(Ni 0.5Cu 0.5). Additionally, semi-coherent interfaces form at Cu/Ti(Ni 0.5Cu 0.5) and NiTiCu 2O 4/R-phase interfaces. However, during cyclic tensile testing, the deterioration of superelastic response in NiTi joints is primarily attributed to the hindrance caused by the USW-induced room-temperature stabilized martensite, dislocation entanglements, and NiTiCu 2O 4 during martensite reverse transformation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Advanced Welding Techniques Analysis · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Process optimization and thermodynamic modeling of weld zone in nickel powder-added dissimilar pulsed-laser NiTi/ASS joint10.1016/j.jmrt.2022.08.086 ↗
2. Phase identification and thermodynamic modeling of a quaternary system in dissimilar laser-welded NiTi/ASS10.1016/j.jmrt.2021.11.154 ↗
3. On the effects of selective laser melting process parameters on microstructure and thermomechanical response of Ni-rich NiTi10.1016/j.actamat.2017.10.072 ↗
4. Physical metallurgy of Ti–Ni-based shape memory alloys10.1016/j.pmatsci.2004.10.001 ↗
5. Ultrasonic spot welded NiTi joints using an aluminum interlayer: microstructure and mechanical behavior10.1016/j.jmapro.2020.05.043 ↗
6. Improvement of the stability of superelasticity and elastocaloric effect of a Ni-rich Ti-Ni alloy by precipitation and grain refinement10.1016/j.scriptamat.2018.11.024 ↗
7. Study on interfacial characteristics and properties of NiTi/Al–mg joint by vaporizing foil actuator welding10.1016/j.jmrt.2022.08.090 ↗
8. Tailoring the superelasticity of NiTi alloy fabricated by directed energy deposition through the variation of residual stress10.1016/j.matdes.2022.111311 ↗
9. Fabrication of NiTi through additive manufacturing: a review10.1016/j.pmatsci.2016.08.001 ↗
10. Manufacturing and processing of NiTi implants: a review10.1016/j.pmatsci.2011.11.001 ↗
11. Stable tensile recovery strain induced by a Ni4Ti3 nanoprecipitate in a Ni50.4Ti49.6 shape memory alloy fabricated via selective laser melting10.1016/j.actamat.2021.117261 ↗
12. Solidification characterization and its correlation with the mechanical properties and functional response of NiTi shape memory alloy manufactured by electron beam freeform fabrication
13. Improvement of tensile superelasticity by aging treatment of NiTi shape memory alloys fabricated by electron beam wire-feed additive manufacturing10.1016/j.jmst.2022.10.050 ↗
14. Welding and joining of NiTi shape memory alloys: a review10.1016/j.pmatsci.2017.04.008 ↗
15. Microstructure and mechanical properties of resistance-welded NiTi/stainless steel joints10.1016/j.jmatprotec.2017.07.001 ↗
16. Laser welding of thin foil nickel–titanium shape memory alloy10.1016/j.optlaseng.2010.08.007 ↗
17. Resistance spot welding of NiTi shape memory alloy sheets: microstructural evolution and mechanical properties10.1016/j.jmapro.2022.07.006 ↗
18. Microstructure and mechanical behaviors of electron beam welded NiTi shape memory alloys10.1016/j.matdes.2013.12.039 ↗
19. Tungsten inert gas (TIG) welding of Ni-rich NiTi plates: functional behavior10.1088/0964-1726/25/3/03LT01 ↗
20. Microstructural characterization of laser micro-welded nitinol wires10.1016/j.matchar.2017.11.022 ↗
21. Enhancement of mechanical and functional properties of welded NiTi by controlling nickel vapourisation10.1080/13621718.2019.1595926 ↗
22. Size effect on the microstructure, phase transformation behavior, and mechanical properties of NiTi shape memory alloys fabricated by laser powder bed fusion10.1016/j.jmst.2023.02.026 ↗
23. Laser welding of a NiTi alloy: mechanical and shape memory behaviour10.1016/j.msea.2005.08.209 ↗
24. Structure, martensitic transformations and mechanical behaviour of NiTi shape memory alloy produced by wire arc additive manufacturing10.1016/j.jallcom.2020.156851 ↗
25. Tuning the microstructure, martensitic transformation and superelastic properties of EBF3-fabricated NiTi shape memory alloy using interlayer remelting10.1016/j.matdes.2022.110886 ↗
26. The mechanism of multistage martensitic transformations in aged Ni-rich NiTi shape memory alloys10.1016/S1359-6454(01)00385-8 ↗
27. Laser welding of precipitation strengthened Ni-rich NiTiHf high temperature shape memory alloys: microstructure and mechanical properties10.1016/j.matdes.2018.11.053 ↗
28. Microstructure and mechanical behaviors of electron beam welded NiTi shape memory alloys10.1016/j.matdes.2013.12.039 ↗
29. Revealing microstructural evolutions and mechanical properties of resistance spot welded NiTi-stainless steel with Ni or Nb interlayer
30. Microstructure and mechanical properties of ultrasonic spot welding TiNi/Ti6Al4V dissimilar materials using pure Al coating10.1016/j.jmapro.2021.02.009 ↗
31. Microstructure and mechanical properties of dissimilar NiTi and 304 stainless steel joints produced by ultrasonic welding10.1016/j.ultras.2022.106684 ↗
32. Effect of ultrasonic spot welding on the mechanical behaviour of NiTi shape memory alloys
33. Effects of vibration amplitude on microstructure evolution and mechanical strength of ultrasonic spot welded cu/Al joints10.3390/met7110471 ↗
34. Investigation of interfacial layer for ultrasonic spot welded aluminum to copper joints10.1038/s41598-017-12164-2 ↗
35. Dynamic recovery and recrystallization mechanisms during ultrasonic spot welding of Al-cu-mg alloy10.1016/j.matchar.2017.06.018 ↗
36. On the metallurgical joining mechanism during ultrasonic spot welding of NiTi using a cu interlayer10.1016/j.scriptamat.2019.12.012 ↗
37. Interfacial microstructure evolution and weld formation during ultrasonic welding of Al alloy to cu10.1016/j.matchar.2018.03.010 ↗
38. The effect of high strain rate deformation on intermetallic reaction during ultrasonic welding aluminium to magnesium10.1016/j.msea.2012.06.055 ↗
39. Laser welding of Ti–6Al–4V to nitinol10.1016/j.matdes.2014.04.078 ↗
40. Effect of interlayer thickness on microstructure and mechanical properties of as welded Ti6Al4V/cu/NiTi joints10.1016/j.matlet.2014.06.141 ↗
41. Microstructure, mechanical properties and transformation behavior of friction stir welded Ni50.7Ti49.3 alloy10.1016/j.matdes.2020.108491 ↗
42. Origin of abnormal multi-stage martensitic transformation behavior in aged Ni-rich Ti–Ni shape memory alloys10.1016/j.actamat.2004.06.002 ↗
43. Ultrahigh-performance TiNi shape memory alloy by 4D printing10.1016/j.msea.2019.138166 ↗
44. Improvement on microstructure and mechanical properties of cu/Al ultrasonic spot welded joints assisted by periodic additional force10.1016/j.jmatprotec.2024.118325 ↗
45. Microstructure and lap shear strength of the weld interface in ultrasonic welding of Al alloy to stainless steel10.1016/j.scriptamat.2016.02.004 ↗
46. Microstructural study and simulation of intrinsic two-way shape memory behavior of functionally graded Ni-rich/NiTiCu thin film10.1016/j.matchar.2017.11.056 ↗
47. Wire-based directed energy deposition of NiTiTa shape memory alloys: microstructure, phase transformation, electrochemistry, X-ray visibility and mechanical properties
48. Effects of sputtering induced artifacts on the determination of diffusion coefficient: application to Ni/cu system10.1016/j.vacuum.2022.111206 ↗
49. Growth kinetics of intermetallic compounds in cu–Ti diffusion couples10.1016/j.intermet.2024.108261 ↗
50. Diffusion evaluation of cu in NiTi bi-layer thin film interface10.1016/j.jallcom.2014.01.068 ↗
51. The effect of cu addition on the morphological, structural and mechanical characteristics of nanocrystalline NiTi shape memory alloys10.1016/j.jallcom.2018.07.217 ↗
52. A method for the estimation of the Interface temperature in ultrasonic joining10.1007/s11661-014-2203-7 ↗
53. On the coherency of Y2Ti2O7 particles with austenitic matrix of oxide dispersion strengthened steel10.1016/j.actamat.2015.01.060 ↗
54. Improved functional stability of a coarse-grained Ti-50.8 at.% Ni shape memory alloy achieved by precipitation on dislocation networks10.1016/j.scriptamat.2019.01.006 ↗
55. Graded phase structure in the surface layer of NiTi alloy processed by surface severe plastic deformation10.1016/j.scriptamat.2011.02.008 ↗
56. Texture-induced anisotropic phase transformation in a NiTi shape memory alloy10.1016/j.msea.2018.01.075 ↗