Texture analysis of the effect of non-basal slip systems on the dynamic recrystallization of the Mg alloy AZ31
Source abstract
Abstract
Abstract The influence of non-basal slip systems on the dynamic recrystallization of a rolled and annealed Mg AZ31 sheet has been examined with the aim of investigating the relation between the deformation and recrystallization mechanisms in this alloy. With that purpose, the material was tested at 10 − 3 s − 1 in tension along the rolling direction (RD), a condition under which prismatic slip and basal slip are the main deformation mechanisms, and in compression along the normal direction (ND), where pyramidal slip and basal slip predominate. The evolution of the microstructure and the texture at temperatures between 25 °C and 300 °C was examined. The optimum conditions for the onset of discontinuous dynamic recrystallization in this alloy appear to be those in which all three slip modes, i.e., basal, prismatic, and pyramidal slip are active.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Magnesium alloy applications in Automotive structures10.1007/s11837-008-0150-8 ↗
2. Magnesium: properties–applications–potential10.1016/S0921-5093(00)01351-4 ↗
3. Trends in the development of new Mg alloys10.1146/annurev.matsci.020408.133717 ↗
4. Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B10.1016/j.ijplas.2004.05.018 ↗
5. Mechanical behavior and microstructural evolution of a Mg AZ31 sheet at dynamic strain rates10.1016/j.actamat.2010.01.029 ↗
6. Orientation dependent slip and twinning during compression and tension of strongly textured magnesium AZ31 alloy10.1016/j.msea.2010.02.008 ↗
7. Temperature dependency of slip and twinning in plane strain compressed magnesium single crystals10.1016/j.actamat.2010.11.064 ↗
8. Mechanical anisotropy and deep drawing behaviour of AZ31 and ZE10 magnesium alloy sheets10.1016/j.actamat.2009.09.038 ↗
9. A taylor model based description of the proof stress of magnesium AZ31 during hot working10.1007/s11661-003-0146-5 ↗
10. Deformation mechanisms and plastic anisotropy in magnesium alloy AZ3110.1016/j.actamat.2011.04.028 ↗
11. Bakarian · Trans AIME · 1943 · 152 · 226
12. Effect of temperature on the flow stress and strain-hardening coefficient of magnesium single crystals
13. Deformation of magnesium single crystals by nonbasal slip
14. Incorporation of solid solution alloying effects into polycrystal modeling of Mg alloys10.1007/s11661-010-0527-5 ↗
15. Bettles · 2012
16. Dynamic recrystallization and the development of microstructure during the high temperature deformation of magnesium10.1016/0001-6160(82)90031-1 ↗
17. Correlation of plastic deformation and dynamic recrystallization in magneisum alloy ZK6010.1016/S1359-6454(01)00020-9 ↗
18. Twinning, dynamic recovery and recrystallization in hot worked Mg–Al–Zn alloy10.1016/S0921-5093(02)00007-2 ↗
19. Influence of texutre on dynamic recrystallization and deformation mechanisms in rolled or ECAPed AZ31 magnesium alloy10.1016/j.msea.2007.11.024 ↗
20. The influence of crystallographic texture on dynamic recrystallization10.1155/TSM.32.47 ↗
21. Deformation behavior and controlling mechanisms for plastic flow of magnesium and magnesium alloy10.2320/matertrans.44.426 ↗
22. Influence of deformation conditions and texture on the high temperature flow stress of magnesium AZ3110.1016/S1471-5317(01)00010-4 ↗
23. Continuum modeling of the response of a Mg alloy AZ31 rolled sheet during uniaxial deformaiton10.1016/j.ijplas.2011.05.002 ↗
24. Texture effect on microyielding of wrought magnesium alloy AZ3110.1016/j.msea.2011.01.046 ↗
25. Evaluation of self-consistent polycrystal plasticity models for magnesium alloy AZ31B sheet10.1016/j.ijsolstr.2010.06.016 ↗
26. Simulation of texture evolution and macroscopic properties in Mg alloys using the crystal plasticity finite element method10.1016/j.msea.2009.09.055 ↗
27. Yi · Acta Mater · 2006 · 54 · 54910.1016/j.actamat.2005.09.024 ↗
28. Texture analysis with MTEX—free and open source software toolbox10.4028/www.scientific.net/SSP.160.63 ↗
29. Effective values of critical resolved shear stress for slip in polycrystalline magnesium and other hcp metals10.1016/j.scriptamat.2010.05.047 ↗
30. In situ analysis of the tensile and tensile-creep deformation mechanisms in rolled AZ3110.1016/j.actamat.2011.10.025 ↗