Effect of cryomilling time on microstructure evolution and hardness of cryomilled AZ31 powders
Source abstract
Abstract
The synthesis of nanostructured AZ31 powder by cryomilling was studied in this paper. The microstructural evolution during cryomilling, including the changes of particle morphology and internal grain size, was characterized via optical microscopy, SEM, TEM and XRD. Observations during the cryomilling produced four main findings. Firstly, cryomilling can refine the grains of AZ31 particles down to 100 nm after around 1 h milling and the minimum average grain size of about 30 nm was reached when the cryomilling time was extended to 6 h or longer. Secondly, cold welding played a dominant role in the early stage of cryomilling, while fracture took place in the late stage and surpassed cold welding. The former led to a particle size increase while the latter decreased the particle size. The minimum average particle size after 6 h cryomilling was approximately 26 μm. Thirdly, a few particles were agglomerated with other particles and could not be processed by cryomilling due to cold welding. Finally, after cryomilling 6 h and longer times, the hardness reached 162 HV which was much higher than other values reported in AZ31 alloy studies.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. High hardness and thermal stability of nanocrystalline Mg–Al alloys synthesized by the high-energy ball milling10.1016/j.mtla.2018.10.004 ↗
2. Enhancing ductility and strength of nanostructured Mg alloy by in-situ powder casting during spark plasma sintering10.1016/j.jallcom.2018.07.247 ↗
3. On the use of cryomilling and spark plasma sintering to achieve high strength in a magnesium alloy10.1016/j.jallcom.2016.07.162 ↗
4. Dislocation/particle interactions in an oxide dispersion strengthened alloy10.1016/S0036-9748(88)80230-8 ↗
5. Development of nanocrystalline structure during cryomilling of Inconel 62510.1557/JMR.2001.0372 ↗
6. Synthesis and characterization of nanocrystalline Ni produced by cryomilling in liquid nitrogen10.1016/S1001-0521(07)60175-2 ↗
7. Microstructural investigation of nanocrystalline bulk Al–Mg alloy fabricated by cryomilling and extrusion10.1016/j.msea.2004.02.013 ↗
8. Synthesis and consolidation via spark plasma sintering of nanostructured Al-5356/B4C composite10.1016/j.msea.2011.02.079 ↗
9. Bulk nanocrystalline aluminum 5083 alloy fabricated by a novel technique: Cryomilling and spark plasma sintering10.1007/BF02586229 ↗
10. A tri-modal aluminum based composite with super-high strength10.1016/j.scriptamat.2005.05.004 ↗
11. High grain size stability of nanocrystalline Al prepared by mechanical attrition10.1557/JMR.2001.0474 ↗
12. Microstructural evolution during recovery and recrystallization of a nanocrystalline Al-Mg alloy prepared by cryogenic ball milling10.1016/S1359-6454(03)00083-1 ↗
13. Grain growth of nanocrystalline Fe–Al alloys produced by cryomilling in liquid argon and nitrogen10.1016/S0921-5093(98)00765-5 ↗
14. Synthesis of nanocrystalline Zn-22 Pct Al using cryomilling10.1007/s11661-004-0368-1 ↗
15. Mechanical behavior of cryomilled CP-Ti consolidated via quasi-isostatic forging10.1007/s11661-008-9688-x ↗
16. Nanostructure in a Ti alloy processed using a cryomilling technique10.1016/j.msea.2006.05.136 ↗
17. H-sorption behaviour of mechanically activated Mg–Zn powders10.1016/j.jallcom.2006.11.189 ↗
18. Cryomilling and spark plasma sintering of nanocrystalline magnesium-based alloy10.1557/jmr.2010.94 ↗
19. Revealing the deformation mechanisms for room-temperature compressive superplasticity in nanocrystalline magnesium10.1016/j.mtla.2020.100731 ↗
20. Atomistic study on the interaction of nitrogen and Mg lattice and the nitride formation in nanocrystalline Mg alloys synthesized using cryomilling process10.1016/j.actamat.2016.06.012 ↗
21. Reversed compressive yield anisotropy in magnesium with microlaminated structure10.1016/j.actamat.2017.12.025 ↗
22. Heterogeneous Mg-based nanocomposites with simultaneously improved strength and toughness10.1016/j.matlet.2020.128231 ↗
23. A model for the grain refinement mechanism in equal channel angular pressing of Mg alloy from microstructural studies10.1016/j.msea.2006.06.103 ↗
24. Rietveld refinement of powder X-ray diffraction, microstructural and mechanical studies of magnesium matrix composites processed by high energy ball milling10.1016/j.jma.2018.08.002 ↗
25. High-resolution TEM characterization of SiC nanowires as reinforcements in a nanocrystalline Mg-matrix10.1016/j.matchar.2013.01.003 ↗
26. High strength, nano-structured Mg-Al-Zn alloy10.1016/j.msea.2010.11.073 ↗
27. Serrated flow in nanostructured binary Mg-Al alloys10.1016/j.scriptamat.2016.09.019 ↗
28. Spark plasma sintering of a high-energy ball milled Mg-10 wt% Al alloy10.1016/j.jma.2020.02.006 ↗
29. X-ray peak broadening on microstructure, and structural properties of titanium and Ti-6Al-4V alloys10.1016/j.matpr.2019.09.137 ↗
30. Cryomilled nanostructured materials: processing and properties10.1016/j.msea.2007.06.099 ↗
31. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
32. Synthesis and mechanical behavior of nanostructured materials via cryomilling10.1016/j.pmatsci.2005.04.004 ↗
33. Hall–Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
34. Accelerated development of high-strength magnesium alloys by machine learning10.1007/s11661-020-06132-1 ↗
35. M.S. Khoshkhoo, S. Scudino, J. Thomas, K.B. Surreddi, J. Eckert, Grain and crystallite size evaluation of cryomilled pure copper, J. Alloys Compd. 509, Supplement 1 (2011) S343-S347.10.1016/j.jallcom.2011.02.066 ↗
36. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
37. Formation of nanostructure in Al produced by a low-energy ball milling at cryogenic temperature10.1016/j.msea.2003.10.235 ↗
38. Nanostructure formation by mechanical attrition10.1016/0965-9773(95)00027-5 ↗
39. Strengthening mechanisms in a high-strength bulk nanostructured Cu–Zn–Al alloy processed via cryomilling and spark plasma sintering10.1016/j.actamat.2012.09.036 ↗
40. Thermal stability of cryomilled Mg alloy powder
41. What is going on in magnesium alloys?10.1016/j.jmst.2017.07.019 ↗
42. Ertorer · 2011
43. Wen · 2012