3D X-ray computerized tomography of White Etching Cracks (WEC)
Source abstract
Abstract
Abstract This work is focused on demonstrating the possibilities of using X-ray Computerized Tomography laboratory equipment based on density measurements for making 3D maps of White Etching Crack networks in bearings. Four bearing specimens have been investigated that contained different crack morphologies which were visualized in 3D. For crack reconstruction, simple global and local threshold procedures have been successfully applied, although there are certain limitations for narrow cracks or crack tips. Specific features on the crack networks could be identified, such as crack interaction with inclusions, which was verified using microscopy characterization. By using the 3D maps as a guide for sectioning, these features were subsequently investigated with scanning electron microscopy (SEM) and chemical analysis. Through stress calculations it was demonstrated that the depth of the maximum Tresca stress and the location of WEC correlate when the real load and stress history is known. The propagation direction of the WEC is however not defined by critical plane orientation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Non-Destructive Testing Techniques · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. EBSD investigation of the crack initiation and TEM/FIB analyses of the microstructural changes around the cracks formed under Rolling Contact Fatigue (RCF)10.1016/j.ijfatigue.2009.07.002 ↗
2. Electron microscopy analysis of structural changes within white etching areas10.1080/02670836.2016.1139030 ↗
3. An updated review: white etching cracks (WECs) and axial cracks in wind turbine gearbox bearings10.1080/02670836.2015.1133022 ↗
4. Service loading analysis of wind turbine gearbox rolling bearings based on X-ray diffraction residual stress measurements10.4028/www.scientific.net/MSF.768-769.723 ↗
5. Crehu · 2014
6. Evans · 2013
7. A review: the dilemma with premature white etching crack (WEC) bearing failures
8. Through-hardening or case-hardening for tapered roller bearings
9. Investigations of bearing failures associated with white etching areas (WEAs) in wind turbine gearboxes10.1080/10402004.2013.823531 ↗
10. Investigation on the mechanisms of white etching crack (WEC) formation in rolling contact fatigue and identification of a root cause for bearing premature failure10.1016/j.wear.2016.08.001 ↗
11. Characterisation of white etching crack damage in wind turbine gearbox bearings10.1016/j.wear.2015.06.008 ↗
12. Confirming subsurface initiation at non-metallic inclusions as one mechanism for white etching crack (WEC) formation10.1016/j.triboint.2014.03.012 ↗
13. Using advanced tomography techniques to investigate the development of White Etching Cracks in a prematurely failed field bearing10.1016/j.triboint.2017.07.028 ↗
14. Practical cone-beam algorithm10.1364/JOSAA.1.000612 ↗
15. An analysis of histogram-based thresholding algorithms10.1006/cgip.1993.1040 ↗
16. Image analysis of cracks in the weld metal of wet welted steel joint by three dimensional (3d) X-ray microtomography10.1016/j.matchar.2013.06.016 ↗
17. Reproduction of white etching cracks under rolling contact loading on thrust bearing and two-disc test rigs10.1016/j.wear.2017.06.020 ↗
18. Multiscale characterization of White Etching Cracks (WEC) in a 100Cr6 bearing from a thrust bearing test rig10.1016/j.wear.2016.11.016 ↗
19. IEC · 2012
20. ISO · 2008
21. Gegner · 2011
22. A numerical method for solving rough contact problems based on the multi-level multi-summation and conjugate gradient techniques10.1016/S0043-1648(99)00113-1 ↗
23. Studying contact stress fields caused by surface tractions with a discrete convolution and fast Fourier transform algorithm10.1115/1.1401017 ↗
24. A critical plane approach to multiaxial fatigue damage including out-of-phase loading10.1111/j.1460-2695.1988.tb01169.x ↗
25. Efficiency of algorithms for shear stress amplitude calculation in critical plane class fatigue criteria10.1016/j.commatsci.2005.01.005 ↗
26. Microstructural changes and crack initiation with white etching area formation under rolling/sliding contact in bearing steel10.2355/isijinternational.45.1897 ↗