Microstructure evolution in abrasion-induced surface layer on an Al–Zn–Mg–Cu alloy
Source abstract
Abstract
Abstract An altered surface layer forms on an Al–Zn–Mg–Cu alloy during surface preparation by abrasion with grinding paper. Strain-induced dissolution of η′/η precipitates and formation of nano-sized subgrains were observed in the surface layer with thickness of several hundred nanometers. The segregation of solute elements along dislocations and subgrain boundaries and the precipitation of Al2Cu phase at the sub-boundaries and the free surface were related to enhanced diffusion accelerated by deformation-induced vacancies, dislocations and subgrain boundaries. The microstructure evolution in this layer is mainly attributed to the shear strain and is modified by temperature rise during surface abrasion. The unique surface microstructural changes produced by abrasion might alter the surface properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Strain-induced refinement in a steel with spheroidal cementite subjected to surface mechanical attrition treatment10.1016/j.actamat.2007.09.003 ↗
2. The formation of nanograin structures and accelerated room-temperature theta precipitation in a severely deformed Al–4wt.% Cu alloy10.1016/j.actamat.2009.11.008 ↗
3. Formation of nanograined structure and decomposition of supersaturated solid solution during high pressure torsion of Al–Zn and Al–Mg alloys10.1016/j.actamat.2004.06.006 ↗
4. Microstructures and mechanical properties of ultrafine grained 7075 Al alloy processed by ECAP and their evolutions during annealing10.1016/j.actamat.2004.06.017 ↗
5. The ubiquitous Beilby layer on aluminium surfaces10.1002/sia.3204 ↗
6. Influence of heat treatment and surface conditioning on filiform corrosion of aluminium alloys AA3005 and AA575410.1016/S0010-938X(01)00019-1 ↗
7. Sequence of corrosion attack of machining induced flow zone produced on some AI alloys that leads to rapid intergranular penetration10.1179/mst.1998.14.2.151 ↗
8. Precipitation in an AA6111 aluminium alloy and cosmetic corrosion10.1016/j.actamat.2006.08.025 ↗
9. Surface layer dissolution kinetics of aluminum alloy 7075 in various tempers10.5006/1.3278411 ↗
10. The effect of temper on the first breakdown in AA707510.1016/j.corsci.2007.02.004 ↗
11. On the first breakdown in AA7075-T610.1016/j.corsci.2007.02.001 ↗
12. Effect of surface roughness on breakdown behavior of Al–Zn–Mg–Cu alloy10.1149/2.1131409jes ↗
13. Mechanism of localized breakdown of 7000 series aluminum alloys10.1149/2.080310jes ↗
14. A surface deformation region on mechanically polished surfaces of 316 stainless steels: its effects on the sensitization of the alloy10.1016/0956-716X(92)90635-R ↗
15. Microstructural evolution and formation of nanocrystalline intermetallic compound during surface mechanical attrition treatment of cobalt10.1016/j.actamat.2007.06.030 ↗
16. Microstructure of two-phase Al–1.7at% Cu alloy deformed by equal-channel angular pressing10.1016/S1359-6454(00)00308-6 ↗
17. Cementite dissolution in heavily cold drawn pearlitic steel wires10.1016/S1359-6454(96)00216-9 ↗
18. Plastic strain-induced grain refinement in the nanometer scale in a Mg alloy10.1016/j.actamat.2006.09.018 ↗
19. The nature of mechanically polished surfaces of copper10.1016/0026-0800(81)90001-X ↗
20. Strain-induced ultrahard and ultrastable nanolaminated structure in nickel10.1126/science.1242578 ↗
21. Continuous recrystallisation of lamellar deformation structures produced by severe deformation10.1016/j.actamat.2004.03.019 ↗
22. On the nature of T(Al2Mg3Zn3) and S(Al2CuMg) phases present in as-cast and annealed 7055 aluminum alloy10.1016/j.msea.2004.09.013 ↗
23. Strain-induced dissolution of Cu–Mg co-clusters and dynamic recrystallization near a fatigue crack tip of an underaged Al–Cu–Mg alloy during cyclic loading at ambient temperature10.1016/j.scriptamat.2011.03.012 ↗
24. Segregation of solute elements at grain boundaries in an ultrafine grained Al–Zn–Mg–Cu alloy10.1016/j.ultramic.2010.11.013 ↗
25. On the origin of the extremely high strength of ultrafine-grained Al alloys produced by severe plastic deformation10.1016/j.scriptamat.2010.07.014 ↗
26. Polishing and lapping temperatures10.1115/1.2832453 ↗
27. Microstructure and vacancy-type defects in high-pressure torsion deformed Al–Cu–Mg–Mn alloy10.1016/j.scriptamat.2009.04.027 ↗
28. Mechanical alloying of Cu and Fe induced by severe plastic deformation of a Cu–Fe composite10.1016/j.actamat.2005.01.024 ↗
29. Grain boundary structure of nanocrystalline Cu processed by cryomilling10.1080/1478643031000083633 ↗
30. Nanostructure and related mechanical properties of an Al–Mg–Si alloy processed by severe plastic deformation10.1080/09500830802186938 ↗
31. On the natural aging behavior of aluminum 6061 alloy after severe plastic deformation10.1016/j.msea.2013.05.051 ↗
32. Reprecipitation behavior in Al–Cu binary alloy after severe plastic deformation-induced dissolution of θ′ particles10.1016/j.msea.2012.03.010 ↗
33. Influence of equal-channel angular pressing on precipitation in an Al–Zn–Mg–Cu alloy10.1016/j.actamat.2009.03.017 ↗
34. Precipitation kinetics in a severely plastically deformed 7075 aluminium alloy10.1016/j.actamat.2013.11.071 ↗
35. Growth of grain boundary precipitates in Al–4% Cu by interfacial diffusion10.1016/0001-6160(68)90097-7 ↗
36. Transmission electron microscopy characterization of Al2Cu precipitate growth kinetics by in situ heat treatment10.1016/j.vacuum.2008.03.049 ↗