Effects of rolling processes on ridging generation of ferritic stainless steel
Source abstract
Abstract
Abstract In order to reduce the ridging generation of ferritic stainless steel (FSS) during forming process, the crystallographic texture of the FSS was modified by optimisation of both rolling and annealing processes. A systematic study was carried out to improve the ridging resistance of the FSS by investigating the sequential changes in microstructure and texture during different rolling and annealing processes. The results show that the surface roughness of the final sheet strained by 20% along the rolling direction is decreased by 20% to 30% using Steckel-mill rolling compared to traditional tandem rolling. A direct correlation is found between the ridging resistance of the FSS and the rolling routines. It has been observed that an optimal reduction value during cold rolling process is critical to the microstructural refinement and surface quality improvement of the FSS. Reduction of the fraction of {001} 〈110〉 component by optimisation of the rolling processes is found to be effective in reducing the ridging height of the FSS during the formation process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Characteristics of oxide scale formed on ferritic stainless steels in simulated reheating atmosphere10.1016/j.surfcoat.2014.09.019 ↗
2. Oxide scale characterization of ferritic stainless steel and its deformation and friction in hot rolling10.1016/j.triboint.2014.11.026 ↗
3. High temperature oxidation behaviour of ferritic stainless steel SUS 430 in humid air10.1007/s12540-015-4168-5 ↗
4. The mechanism of ridging in ferritic stainless steels
5. The mechanism of ridging phenomenon in 17% chromium stainless steel sheets
6. Anisotropic plastic flow in ferritic stainless steels and the roping phenomenon10.1007/BF02680588 ↗
7. Effect of heat treatment on a ridging phenomenon of ferritic stainless steels
8. Effect of coarse grain band on the ridging severity of 409L ferritic stainless steel10.1016/j.matdes.2016.05.100 ↗
9. Asymmetric rolling as means of texture and ridging control and grain refinement of aluminum alloy and steel sheets
10. Microsturcture and micro-texture evolution during the dynamic recrystallization of a Ni-30Fe-Nb-C model alloy10.1016/j.jallcom.2016.07.200 ↗
11. Effect of intermediate annealing on texture, formability and ridging of 17% Cr ferritic stainless steel sheet10.1016/S0921-5093(00)01995-X ↗
12. Influence of the cold rolling and annealing sequence on the ridging behaviour of Ti-stabilized 18% Cr ferritic stainless steel10.1002/srin.201000125 ↗
13. Formability of Sn-containing ferrite stainless steel sheet10.1016/j.proeng.2014.10.109 ↗
14. Lefebvre · Model. Simul. Mater. Sci. Eng. · 2012 · 20 · 110.1088/0965-0393/20/2/024008 ↗
15. Wu · Mater. Sci. Eng. A · 2006 · 423 · 30010.1016/j.msea.2006.02.043 ↗
16. Pierce · Acta Metall. · 1982 · 30 · 108710.1016/0001-6160(82)90005-0 ↗
17. Knutsen · Mater. Sci. Technol. · 2002 · 18 · 127910.1179/026708302225007457 ↗
18. Viana · Mater. Sci. Technol. · 2006 · 22 · 29310.1179/026708306X81531 ↗
19. Wu · Mater. Sci. Eng. A · 2006 · 427 · 24110.1016/j.msea.2006.04.045 ↗
20. Analysis of roping in an AA6111 T4P automotive sheet in 3D deformation states10.1016/j.actamat.2016.11.028 ↗
21. Grain-scale micromechanics of polycrystal surfaces during plastic straining10.1016/S1359-6454(02)00557-8 ↗
22. Crystal-plasticity simulation of the correlation of microstructure and roping in AA 6xxx Al-Mg-Si sheet alloys for automotive applications10.1016/j.actamat.2012.06.039 ↗
23. Effect of through-thickness macro and micro-texture gradients on ridging of 17%Cr ferritic stainless steel sheet10.1002/srin.200506098 ↗
24. ASTM Standard E8-E8M-08 · 2008
25. ASTM Standard E2627-13 · 2013
26. The effect of texture on ridging of ferritic stainless steel10.1016/S1359-6454(03)00187-3 ↗
27. An analysis of ridging of ferritic stainless steel 43010.1016/j.msea.2017.01.021 ↗
28. Grain boundary engineering for structure materials of nuclear reactors10.1016/j.jnucmat.2013.03.050 ↗
29. Effects of processing optimisation on microstructure, texture, grain boundary and mechanical properties of Fe-17Cr ferritic stainless steel thick plates10.1016/j.msea.2014.07.107 ↗
30. Analysis of roping of aluminum sheet materials based on the meso-scale moving window approach10.1016/j.actamat.2014.10.054 ↗
31. Influence of differential speed rolling ratio on the ridging behaviour of ultra purified 17%Cr ferritic stainless steel10.1016/j.matchar.2017.11.049 ↗
32. Texture-induced surface roping in an automotive aluminium sheet10.1016/j.scriptamat.2009.06.016 ↗
33. Effects of hot rolled shear bands on formability and surface ridging of an ultra purified 21%Cr ferritic stainless steel10.1016/j.jmatprotec.2011.01.005 ↗
34. Composition and orientation effects on the final recrystallisation texture of coarse-grained Nb-containing AISI 430 ferritic stainless steels10.1016/j.msea.2011.01.007 ↗
35. Retention of the Goss orientation between microbands during cold rolling of an Fe3%Si single crystal10.1016/j.actamat.2006.11.048 ↗
36. Texture of ferritic stainless steel10.1179/mst.1993.9.4.302 ↗