journal article·2023-03

Dynamic recrystallization mechanism and twinning behavior in hot deformation of Ti-46.5Al-2Nb-2Cr with initial duplex microstructure

Yuanyu Chen, Lian Li, Hong Li, Miaoquan Li

Publisher page

Abstract

The dynamic recrystallization (DRX) mechanism and twinning behavior of Ti-46.5Al-2Nb-2Cr in the α + γ two-phase region were investigated in this work. Isothermal compression of Ti-46.5Al-2Nb-2Cr with initial duplex microstructure was performed at the deformation temperatures of 1180–1260 °C, the height reductions of 20–60% and strain rates of 0.001–1.0 s −1. Quantitative characterization of grain boundary misorientation, local misorientation and geometrically necessary dislocation (GND) density in the γ phase was made to investigate the DRX behavior. The results showed that DRX occurred in the γ grains and the γ lamellae of the α 2/γ lamellar colonies as the height reduction increased, and the interaction between the deformation temperature and the strain rate influenced the volume fraction of the recrystallized γ phase. Discontinuous DRX (DDRX) via nucleation and grain growth dominated the DRX in the γ phase at a strain rate of 0.001 s −1, in which the volume fraction of the recrystallized γ phase increased with the increasing of deformation temperature. Continuous DRX (CDRX) via transition from medium-angle grain boundaries (MABs) to high-angle grain boundaries (HABs) dominated the DRX in the γ phase at a strain rate of 1 s −1, in which the volume fraction of the recrystallized γ phase decreased with the increasing of deformation temperature. γ/γ twin boundaries were quantitatively investigated. It was shown that γ true twin (TT) was the main twin component formed in the recrystallized γ grains. The fraction of the γ/γ twin boundaries increased with the increasing of deformation temperature at a strain rate of 0.001 s −1 and height reduction of 60%, which decreased with the increasing of strain rate at a deformation temperature of 1260 °C and height reduction of 60%. Transmission electron microscopy and high-resolution TEM (HRTEM) characterizations of the dislocations and stacking fault (SSF) in the γ phase showed that the growth of the DDRX γ grains promoted the occurrence of γ twin.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Review of alloy and process development of TiAl alloys10.1016/j.intermet.2005.10.019 ↗
2. Advances in gamma titanium aluminides and their manufacturing techniques10.1016/j.paerosci.2012.04.001 ↗
3. Evading the strength-ductility trade-off at room temperature and achieving ultrahigh plasticity at 800°C in a TiAl alloy10.1016/j.actamat.2021.117585 ↗
4. Wrought TiAl Blades
5. Constitutive modeling and processing map for elevated temperature flow behaviors of a powder metallurgy titanium aluminide alloy10.1016/j.jmatprotec.2009.04.006 ↗
6. High temperature deformation and control of homogeneous microstructure during hot pack rolling of Ti-44Al-5Nb-(Mo, V, B) alloys: the impact on mechanical properties10.1016/j.msea.2019.02.056 ↗
7. Pulse current auxiliary forging of sintered TiAl alloys based on the investigation of dynamic recrystallization and phase transformation10.1016/j.matchar.2017.11.028 ↗
8. Impact of alloying on stacking fault energies in γ-TiAl10.3390/app7111193 ↗
9. Deformation and dynamic recrystallization behavior of a high Nb containing TiAl alloy10.1016/j.jallcom.2012.11.076 ↗
10. Dynamic recrystallization behavior of Ti-5Al-5Mo-5V-1Cr-1Fe alloy10.1016/j.matdes.2014.06.064 ↗
11. Modeling of dynamic recrystallization volume fraction evolution for AlCu4SiMg alloy and its application in FEM10.1016/S1003-6326(19)65022-3 ↗
12. Dynamic recrystallization behavior of an as-cast TiAl alloy during hot compression10.1016/j.matchar.2014.09.013 ↗
13. Effect of the Zener-Hollomon parameter on the dynamic recrystallization kinetics of Mg-Zn-Zr-Yb magnesium alloy10.1016/j.commatsci.2019.05.015 ↗
14. Dynamic recrystallization kinetics and microstructure evolution of 7055 aluminum alloy during hot compression10.1051/metal/2019034 ↗
15. Microstructure evolution and mechanical properties of a novel beta γ-TiAl alloy10.1016/j.intermet.2012.07.012 ↗
16. Dynamic softening behavior and microstructural characterization of TiAl-based alloy during hot deformation10.1016/j.matchar.2017.05.022 ↗
17. Hot pack rolling nearly lamellar Ti-44Al-8Nb-(W, B, Y) alloy with different rolling reductions: lamellar colonies evolution and tensile properties10.1016/j.matdes.2017.02.053 ↗
18. Flow behavior and microstructure evolution of a P/M TiAl alloy during high temperature deformation10.1016/j.msea.2011.05.071 ↗
19. Effect of alloying additions on work hardening, dynamic recrystallization and mechanical properties of Ti-44Al-5Nb-1Mo alloys during direct hot-pack rolling10.1016/j.msea.2019.138838 ↗
20. Investigation of hydrogen influencing γ-phase true and pseudo twinning in a TiAl based alloy during high-temperature plane strain compression10.1016/j.msea.2017.11.007 ↗
21. A mechanism for the growth of deformation twins in crystals10.1080/14786445108561272 ↗
22. A model for twins in the formation of annealing fcc metals and alloys10.1016/S1359-6454(96)00336-9 ↗
23. A unified static and dynamic recrystallization internal state variable (ISV) constitutive model coupled with grain size evolution for metals and mineral aggregates10.1016/j.ijplas.2018.08.009 ↗
24. Modeling concepts for intermetallic titanium aluminides10.1016/j.pmatsci.2016.01.001 ↗
25. A dislocation density based constitutive model for crystal plasticity FEM including geometrically necessary dislocations10.1016/j.actamat.2006.01.005 ↗
26. Quantification of partially recrystallized polycrystals using electron backscatter diffraction10.1016/0921-5093(94)09601-R ↗
27. Influence of microstructural heterogeneity and plastic strain on geometrically necessary dislocation structure evolution in single-phase and two-phase alloys
28. Experimental and modelling studies of the thermodynamics and kinetics of phase and structural transformations in a gamma TiAl-based alloy10.1016/S0921-5093(04)00985-2 ↗
29. Tuning the microstructure and mechanical properties of TiAl-based alloy through grain boundary engineering10.1016/j.jmrt.2022.05.023 ↗
30. An in-situ high-energy X-ray diffraction study on the hot-deformation behavior of a β-phase containing TiAl alloy10.1016/j.intermet.2013.02.016 ↗
31. Microstructure and mechanical properties of high niobium containing TiAl alloys elaborated by spark plasma sintering10.1016/j.intermet.2010.07.024 ↗
32. Enhanced high-temperature tensile property by gradient twin structure of duplex high-Nb-containing TiAl alloy10.1016/j.actamat.2018.09.007 ↗
33. A β-solidifying TiAl alloy reinforced with ultra-fine Y-rich precipitates10.1016/j.scriptamat.2020.10.010 ↗
34. Appel · 2011
35. Interfacial energies in two-phase TiAl-Ti3Al alloy10.1016/S1359-6462(97)00313-8 ↗
36. Twinning and mechanical behavior of titanium aluminides and other intermetallics
37. Slip transfer across γ-TiAl lamellae in tension10.1016/j.matdes.2018.02.072 ↗
38. An investigation of geometrically necessary dislocations and back stress in large grained tantalum via EBSD and CPFEM10.1016/j.msea.2019.138704 ↗
39. Deformation behavior of high Nb containing TiAl based alloy in alpha plus gamma two phase field region10.1016/j.matdes.2015.10.080 ↗
40. Insights into the abnormal flow softening of lamellar γ-TiAl alloys during hot-working: experimental analysis and numerical simulation10.1016/j.msea.2022.143695 ↗
41. The effect of orientation and lamellar structure on the plastic behavior of TiAl crystals10.1016/0921-5093(92)90050-B ↗
42. Effect of lamellar orientation on the strength and operating deformation mechanisms of fully lamellar TiAl alloys determined by micropillar compression10.1016/j.actamat.2016.10.034 ↗
43. Dynamic recrystallization and hot processing map of Ti-48Al-2Cr-2Nb alloy during the hot deformation10.1016/j.matchar.2021.111332 ↗
44. Experimental study and numerical simulation of dynamic recrystallization behavior of TiAl-based alloy10.1016/j.matdes.2017.02.088 ↗
45. Microstructure evolution and mechanical properties of γ-TiAl honeycomb structure fabricated by isothermal forging and pulse current assisted diffusion bonding10.1016/j.intermet.2018.05.008 ↗
46. Microstructure, mechanical and tribological performances of a directionally solidified γ-TiAl alloy10.1016/j.matchar.2021.111393 ↗
47. Kinetics of cyclically-induced mechanical twinning in γ-TiAl unveiled by a combination of acoustic emission, neutron diffraction and electron microscopy10.1016/j.actamat.2021.116921 ↗
48. Study by EBSD of the development of the substructure in a hot deformed 304 stainless steel10.1016/j.msea.2004.11.049 ↗
49. Twin and twin intersection phenomena in a creep deformed microalloyed directionally solidified high Nb containing TiAl alloy10.1016/j.jmst.2022.02.045 ↗
50. Multiscale modeling of discontinuous dynamic recrystallization during hot working by coupling multilevel cellular automaton and finite element method
51. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
52. Microstructure evolution during dynamic recrystallization of hot deformed superalloy 71810.1016/j.msea.2007.09.008 ↗
53. Dynamic recrystallization mechanisms of 2195 aluminum alloy during medium/high temperature compression deformation
54. Transition of dynamic recrystallization mechanism during hot deformation of Incoloy 028 alloy10.1016/j.jmst.2019.08.058 ↗
55. The adiabatic correction factor for deformation heating during the uniaxial compression test10.1361/105994901770344593 ↗
56. Hot deformation characteristics and dynamic recrystallization mechanism of GH4730 Ni-based superalloy10.1016/j.jallcom.2019.01.237 ↗
57. The mechanism of grain boundary migration10.1016/0001-6160(69)90115-1 ↗
58. A model for the formation of annealing twins in F.C.C. metals and alloys10.1016/0001-6160(78)90046-9 ↗