Effects of carbon content and size on Ti-C reaction behavior and resultant properties of Cu-Ti-C alloy system
Source abstract
Abstract
Abstract TiC-strengthened Cu alloys with various nominal compositions were prepared by a high-energy ball-milling process, followed by consolidation using spark plasma sintering (SPS), and a subsequent heat treatment. The results indicated that the lower atomic ratio of C/Ti, the more residual Ti in copper matrix, resulting in a lower electrical conductivity but higher microhardness of alloy. The optimal atomic ratio was found to be close to1.0. The reaction behavior of Ti-C in the Cu-Ti-C system during this process was investigated. Microstructural results suggested that TiC formation is through a diffusion-controlled mechanism. A thin TiC layer was formed at the surface of C particles, and the growth of TiC layer was controlled by interdiffusion of C and Ti atoms across the TiC layer. An incomplete chemical reaction between Ti and C, characterized by a core-shell structure, was observed when the initial C particles were large, and the TiC particle size was found to strongly depending on the C particle size.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Microstructural design of new high conductivity-high strength Cu-based alloy10.1016/j.jallcom.2015.01.234 ↗
2. High strength and good electrical conductivity in Cu–Cr alloys processed by severe plastic deformation10.1016/j.matlet.2015.03.144 ↗
3. Microstructure and mechanical properties of a high strength Cu-Ni-Si alloy treated by combined aging processes10.1016/j.jallcom.2016.11.137 ↗
4. Ti-added alumina dispersion-strengthened Cu alloy fabricated by oxidation10.1016/j.jallcom.2014.10.031 ↗
5. Phase transformation behaviors and properties of a high strength Cu-Ni-Si alloy10.1016/j.msea.2017.05.001 ↗
6. Creep behavior of two Cu-2 vol% TiC alloys obtained by reaction milling and extrusion10.1016/j.msea.2013.09.024 ↗
7. Superthermostability of nanoscale TIC-reinforced copper alloys manufactured by a two-step ball milling process10.1080/14786435.2015.1112442 ↗
8. Effect of friction stir processing on the microstructure and mechanical properties of Cu-TiC composite10.1016/j.ceramint.2014.04.158 ↗
9. Cu-Ti-C alloy with high strength and high electrical conductivity prepared by two-step ball-milling processes10.1016/j.matdes.2014.04.034 ↗
10. Performance of Cu-TiC alloy electrodes developed by reaction milling for electrical-resistance welding10.1016/j.jmatprotec.2005.02.260 ↗
11. Study on the reaction behavior of self-propagating high-temperature synthesis of TiC ceramic in the Cu-Ti-C system10.1016/j.ijrmhm.2012.06.002 ↗
12. Cast in situ Cu-TiC composites: synthesis by SHS route and characterization10.1016/j.msea.2008.10.002 ↗
13. Experimental evidence of the emptying core mechanism during combustion synthesis of TiC performed under isostatic gas pressure10.1023/A:1015247301495 ↗
14. Formation mechanism of spherical TiC in Ni-Ti-C system during combustion synthesis10.3390/ma10091007 ↗
15. Study of formation behavior of TiC ceramic obtained by self-propagating high-temperature synthesis from Al-Ti-C elemental powders10.1016/j.ijrmhm.2008.09.009 ↗
16. Synthesis of TiC by controlled ball milling of titanium and carbon10.1007/s10853-006-0291-5 ↗
17. Mechanochemical synthesis of nano TiC powder by mechanical milling of titanium and graphite powders10.1016/j.powtec.2011.10.050 ↗
18. Mechanochemistry of Ti-C powder mixtures10.1016/j.actamat.2014.08.036 ↗
19. Microstructural and electrical properties of copper titanium alloy dispersed with carbon nanotubes via powder metallurgy process10.2320/matertrans.Y-M2013846 ↗
20. Powder metallurgy Ti–TiC metal matrix composites prepared by in situ reactive processing of Ti-VGCFs system10.1016/j.carbon.2013.04.088 ↗
21. Effect of reactant C/Ti ratio on the stoichiometry of combustion-synthesized TiCx in Ti-C system10.2109/jcersj2.117.525 ↗
22. Effect of C/Ti ratio on the compressive properties and wear properties of the 50 vol.-% submicron-sized TiCx/2014Al composites fabricated by combustion synthesis and hot press consolidation10.1080/00325899.2016.1172829 ↗
23. Effect of C/Ti ratio on the laser ignited self-propagating high-temperature synthesis reaction of Al-Ti-C system for fabricating TiC/Al composites10.1016/j.matlet.2007.02.004 ↗
24. Effect of powder oxidation on densification and properties of vacuum hot pressed Cu-Cr-Nb alloy10.1016/j.msea.2012.10.062 ↗
25. Influence of two-step ball-milling condition on electrical and mechanical properties of TiC-dispersion-strengthened Cu alloys10.1016/j.matdes.2014.08.027 ↗
26. Synthesis of nanocrystalline TiC powders by mechanical alloying10.1016/0965-9773(95)00012-4 ↗
27. X-ray interactions: photoabsorption, scattering, transmission, and reflection at E = 50-30000 eV, Z = 1–9210.1006/adnd.1993.1013 ↗
28. In-situ fabrication and characterization of ultrafine structured Cu-TiC composites with high strength and high conductivity by mechanical milling10.1016/j.jallcom.2015.10.061 ↗
29. Korchagin · 1982
30. Diffusion of 44Ti in TiCx10.1063/1.1658229 ↗
31. Samsonov · 1980
32. Venetti · 2008 · P92
33. Limits of applicability of the “diffusion-controlled product growth” kinetic approach to modeling SHS
34. Synthesis and mechanical behavior of nanostructured materials via cryomilling10.1016/j.pmatsci.2005.04.004 ↗
35. Solid solubility of carbon in copper mechanically alloyed10.1023/A:1006701708039 ↗
36. Evolution process of the synthesis of TiC in the Cu-Ti-C system10.1016/j.jallcom.2006.11.024 ↗