Microstructure and mechanical properties of dissimilar friction stir lap welding between AZ31 Mg alloy and DC01 steel
Source abstract
Abstract
AZ31 magnesium alloy and DC01 steel were friction stir lap welded (FSLW) with Z -axis force controlled at 7.5 kN. The microstructural features and element distributions of the joint were studied in detail. Mg 17(Al, Zn) 12 particles with significantly high concentration of Zn were found to precipitate in the stir zone on the AZ31 side. A bowl-shaped region formed with a maximum depth of ~770 μm on the DC01 side, with the grain size decreasing rapidly from the base material to the area at the interface (~120 nm) due to the operation of dynamic recrystallization. Significant amount of Mg and Al atoms was found in DC01 grains near interface, which can be attributed to local mechanical intermixing between AZ31 and DC01 and the enhanced solid solubility via severe deformation. A thin Al-rich layer of ~50 nm thick formed within DC01 grains upside at the interface with the Al atoms crossed the interface from AZ31, while abundant nanoscale Mg particles precipitated out at the boundaries of nano-sized DC01 grains due to low solid solubility of Mg in Fe. The tensile shear strength of the joint reached 295.6 N/mm, with the crack passing through the root of hook-like structure and the stir zone of AZ31 instead of the interface, indicating a high bonding strength of such an interface microstructure.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Resistance element welding of magnesium alloy and austenitic stainless steel in three-sheet configurations10.1016/j.jmatprotec.2019.116292 ↗
2. Microstructure evolution and mechanical properties of linear friction welded S31042 heat-resistant steel10.1016/j.jmst.2017.11.031 ↗
3. Improvement in tensile strength of Mg/Al alloy dissimilar friction stir welding joints by reducing intermetallic compounds
4. Effect of reactive alloy elements on friction stir welded butt joints of metallurgically immiscible magnesium alloys and steel10.1016/j.jmapro.2019.02.009 ↗
5. Interfacial microstructure and mechanical property in friction stir welded Mg/Al joints under low rotation speed10.1080/13621718.2021.1935155 ↗
6. A review of bonding immiscible Mg/steel dissimilar metals10.3390/ma11122515 ↗
7. Details of Mg–Zn reactions in AZ31 to galvanised mild steel ultrasonic spot welds10.1179/1362171811Y.0000000098 ↗
8. Suppression of intermetallic reaction layer by ultrasonic assistance during friction stir welding of Al and Mg based alloys10.1016/j.jallcom.2020.154343 ↗
9. Effect of tool offset and tool rotational speed on enhancing mechanical property of Al/Mg dissimilar FSW joints10.1007/s11661-013-1700-4 ↗
10. Friction stir butt welding of magnesium alloy to steel by truncated cone-shaped stirring pin with threads10.1016/j.jmatprotec.2020.117038 ↗
11. Dissimilar FSW of immiscible materials: steel/magnesium10.1016/j.msea.2014.11.060 ↗
12. Effect of surface states of steel on microstructure and mechanical properties of lap joints of magnesium alloy and steel by friction stir welding10.1179/136217109X12568132624325 ↗
13. Strength and failure analysis of similar and dissimilar friction stir spot welds: influence of different tools and pin geometries10.1016/j.matdes.2017.04.084 ↗
14. Role of plastic deformation mechanisms during the microstructural evolution and intermetallics formation in dissimilar friction stir weld10.1016/j.matchar.2020.110371 ↗
15. Effect of the Ni coating thickness on laser welding-brazing of Mg/steel10.1016/j.jallcom.2018.08.080 ↗
16. Comparative study on microstructure and mechanical properties of laser welded–brazed Mg/mild steel and Mg/stainless steel joints10.1016/j.matdes.2012.06.057 ↗
17. Effect of interfacial characteristics on magnesium to steel joint obtained using FAST10.1016/j.matdes.2020.108697 ↗
18. Microstructure and mechanical properties of TIG welded-brazed AZ61 Mg alloy and mild steel joints with and without interlayer
19. Aluminum element effect for electron beam welding of similar and dissimilar magnesium–aluminum–zinc alloys10.1016/j.scriptamat.2007.01.028 ↗
20. Experimental investigation and thermodynamic calculationof the Al-M-Zn system10.1016/S0040-6031(97)00458-9 ↗
21. Transition of dynamic recrystallization mechanism during hot deformation of Incoloy 028 alloy10.1016/j.jmst.2019.08.058 ↗
22. Dynamic recrystallization mechanisms and twining evolution during hot deformation of Inconel 71810.1016/j.msea.2016.09.100 ↗
23. Microstructural development during hot working of Mg-3Al-1Zn10.1007/s11661-007-9207-5 ↗
24. Transition of deformation behavior and its related microstructure evolution in Nimonic 80A under hot-to-warm working10.1016/j.matchar.2015.05.034 ↗
25. Strain rate dependence of ferrite dynamic restoration mechanism in a duplex low-density steel10.1016/j.matdes.2017.07.009 ↗
26. Effect of strain rate on the microstructural development through continuous dynamic recrystallization in a microalloyed steel10.1016/j.msea.2010.01.077 ↗
27. Structural response of superaustenitic stainless steel to friction stir welding10.1016/j.actamat.2011.05.021 ↗
28. Dynamic restoration of the ferrite and austenite phases during hot compressive deformation of a lean duplex stainless steel10.1016/j.msea.2020.139400 ↗
29. Microstructure evolution and mechanical properties of friction stir welded dissimilar joints of as-extruded AM60 and AZ31 alloys10.1016/j.msea.2019.05.032 ↗
30. DDRX and CDRX of an as-cast nickel-based superalloy during hot compression at γ’ sub−/super-solvus temperatures10.1016/j.jallcom.2019.06.202 ↗
31. Hot deformation characterization of duplex low-density steel through 3D processing map development10.1016/j.matchar.2015.07.028 ↗
32. A novel high-strain-rate ferrite dynamic softening mechanism facilitated by the interphase in the austenite/ferrite microstructure10.1016/j.actamat.2016.12.045 ↗
33. Enthalpy of formation of binary solid and liquid Mg alloys – comparison of Miedema-model calculations with data reported in literature10.1016/j.calphad.2019.101647 ↗
34. Formation of Fe5Si3 precipitate in the Fe2Al5 intermetallic layer of the Al/steel dissimilar arc welding joint: a transmission electron microscopy (TEM) study10.1016/j.matchar.2021.111236 ↗
35. Bonding of immiscible Mg and Fe via a nanoscale Fe2Al5 transition layer10.1016/j.scriptamat.2011.08.026 ↗
36. Influencing mechanism of pre-existing nanoscale Al5Fe2 phase on Mg–Fe interface in friction stir spot welded Al-free ZK60–Q235 joint10.1016/j.jmst.2019.12.003 ↗
37. Mechanical alloying produces grain boundary segregation in Fe–Mg powders10.1016/j.scriptamat.2020.01.021 ↗
38. Microstructural refinement and property enhancement of cast light alloys via friction stir processing10.1016/j.scriptamat.2007.09.062 ↗
39. Microstructure and enhanced atomic diffusion of friction stir welding aluminium/steel joints10.1080/02670836.2016.1274464 ↗