journal article·2007-02

Grain refinement in as-cast AZ80 Mg alloy under large strain deformation

Q. Guo, H.G. Yan, Z.H. Chen, H. Zhang

Materials Characterization· Volume 58· Issue 2
Publisher page

Abstract

Abstract Grain refinement in as-cast AZ80 magnesium alloy under large strain deformation was studied by hot multiple forging (MF). The results show that during the deformation there exists a critical strain controlling the degree of the homogeneity, which is in the range of 2–2.4. A homogeneous microstructure with fine dynamic recrystallized grains can be attained when the applied strain exceeds the critical strain and after that, it is difficult to get more grain refinement further. A main characteristic of microstructure evolution is directly associated with grain splitting due to the formation of microbands that develop in various directions. Such microbands intersect each other during hot MF, resulting in continuous subdivision of coarse grains into misoriented fine domains. Further deformation leads to increase in the number and misorientation of these boundaries and finally almost full development of fine equiaxed grains in high strain. New grains are concluded to be evolved by a kind of continuous reaction, that is essentially similar to continuous dynamic recrystallization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Microstructural evolution of AZ61 magnesium alloy during hot deformation10.1179/026708304225022179 ↗
2. Influence of deformation conditions and texture on the high temperature flow stress of magnesium AZ3110.1016/S1471-5317(01)00010-4 ↗
3. Quenched and annealed microstructures of hot worked magnesium AZ3110.2320/matertrans.44.571 ↗
4. Grain size control of commercial wrought Mg–Al–Zn alloys utilizing dynamic recrystallization10.2320/matertrans.42.1200 ↗
5. Dynamic evolution of new grains in magnesium alloy AZ31 during hot deformation10.2320/matertrans.44.197 ↗
6. Dynamic continuous recrystallization characteristics in two stage deformation of Mg–3Al–1Zn alloy sheet10.1016/S0921-5093(02)00096-5 ↗
7. Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK6010.1016/S1359-6454(01)00020-9 ↗
8. Microstructural instability and strength of an AZ31 Mg alloy after severe plastic deformation10.1016/S0921-5093(04)00882-2 ↗
9. Texture development and its effect on mechanical properties of an AZ61 Mg alloy fabricated by equal channel angular pressing10.1016/S1359-6454(03)00161-7 ↗
10. Microstructure evolution of AZ31 magnesium alloy during equal channel angular extrusion10.1023/B:JMSC.0000030731.04301.5f ↗
11. Production of submicrocrystalline structure in large-scale Ti–6Al–4V billet by warm severe deformation processing10.1016/j.scriptamat.2004.08.018 ↗
12. Grain fragmentation in a coarse-grained 7475 Al alloy during hot deformation10.1016/j.scriptamat.2004.02.034 ↗
13. Strain-induced grain evolution in polycrystalline copper during warm deformation10.1007/s11661-998-0203-1 ↗
14. Nanostructural formation of fine grained aluminum alloy by severe plastic deformation at cryogenic temperature10.1023/B:JMSC.0000021463.83899.b3 ↗
15. Microstructure and deformation behaviour of submicrocrystalline 304 stainless steel produced by severe plastic deformation10.1016/S0921-5093(00)02028-1 ↗
16. Continuous recrystallization in austenitic stainless steel after large strain deformation10.1016/S1359-6454(02)00013-7 ↗
17. Grain refinement in magnesium alloy AZ31 during multidirectional forging under decreasing temperature conditions10.4028/www.scientific.net/MSF.488-489.597 ↗
18. Grain refinement of Mg–Al–Zn alloys via accumulative roll bonding10.1016/j.scriptamat.2004.07.028 ↗
19. Characteristics features of microstructure of ALMg5 deformed to large plastic strains10.1016/S0921-5093(00)01803-7 ↗
20. Effect of grain orientation on deformation structure in cold-rolled polycrystalline aluminum10.1016/S1359-6454(98)00229-8 ↗
21. High angle boundaries formed by grain subdivision mechanisms10.1016/S1359-6454(97)00027-X ↗
22. Formation of deformation bands in f. c. c. crystals10.1016/0025-5416(86)90266-1 ↗
23. Ultra-fine grain structures in aluminium alloys by severe deformation processing10.1016/j.msea.2003.10.170 ↗
24. Microstructural evolution over a large strain range in aluminum deformed by cyclic-extrusion-compression10.1016/S0921-5093(98)00988-5 ↗
25. Effect of initial microstructures on grain refinement in a stainless steel by large strain deformation10.1016/S1359-6454(02)00476-7 ↗
26. Development of dynamic recrystallization theory10.1016/j.msea.2004.01.064 ↗
27. Dislocation glide and dynamic recrystallization in LiF single crystals10.1016/S0921-5093(01)01691-4 ↗
28. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
29. Effect of sheet thickness on the microstructural evolution of an Mg AZ61 alloy during large strain hot rolling10.1016/j.scriptamat.2003.11.015 ↗
30. Texture evolution during large-strain hot rolling of the Mg AZ61 alloy10.1016/S0921-5093(03)00043-1 ↗
31. Texture and dislocation structures observation in a dual-phase steel under strain-path changes at large deformation10.1016/j.msea.2005.01.066 ↗
32. Dislocation substructures in mild steel deformed in simple shear10.1016/0921-5093(89)90331-6 ↗
33. Grain orientation effect on microstructure in tensile strained copper10.1016/S1359-6462(98)00051-7 ↗
34. Sitdikov · 2003 · 65
35. Kaibyshev · 1999 · 265
36. Grain refinement in copper under large strain deformation10.1080/01418610108216659 ↗