journal article·2021-11

Solidification features and tensile performance altered by increased welding speed during laser welding GH909 superalloy

Xiong Zhang, Zhengwu Zhu, Xiuquan Ma, Chunming Wang, Gaoyang Mi, Shuye Zheng

Publisher page

Abstract

Abstract In this paper, solidification features and tensile performance under proportionally increased power and speed were systematically studied during laser welding of GH909 alloy. The increase of power density promoted the practical heat adsorption and thus an increasing meting area. Therefore, weld bead geometry was transformed from “Y” to “Hourglass” and again to “Y” under low power and speed (W-1: 1.5 kW and 1.5 m/min) or high types (W-5: 3.5 kW and 3.5 m/min). High power and speed not only promoted dendritic growth in continuous form with progressively developed inter- and intra-grain liquation but also inhibited the equiaxed zone, altered the solidification crack morphology and reduced the eutectic reaction degree. In addition, such condition reduced the epitaxial growth, increased the diversity of growth direction and promoted the growth concentration with aggravated grain size inhomogeneity near to fusion line while an original texture of 〈100〉//TD was also changed to a deflected and diverse fashion with apparent grain coarsening in weld center. The above occurrences were attributed to the reduced duration time of γ forming and γ/Laves eutectic reactions, as well as temperature gradient variations near FL and weld center. W-1 presented a higher strength and elongation rate due to the inhabitation of the coarse grains, high slipping tendency and strip-like cracks.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Thermal barrier characteristics of partially stabilized zirconia coatings on INCOLOY alloy 909 (a controlled expansion alloy)10.1115/1.2906521 ↗
2. Balachander · 2011
3. Weldability of high-strength, low-expansion superalloys
4. A study of the mechanism of laser welding defects in low thermal expansion superalloy GH90910.1016/j.matchar.2013.01.008 ↗
5. Influence of heat input on HAZ liquation cracking in laser welded GH909 alloy10.1016/j.optlastec.2017.01.016 ↗
6. Prospects of laser welding technology in the automotive industry: a review10.1016/j.jmatprotec.2017.02.008 ↗
7. Ahmed · 2005
8. Lippold · 2014
9. Mechanism for minor element effect on GTA fusion zone geometry
10. Effect of weld solidification mode on tensile properties of aluminum weld metal
11. Evolution of dendritic patterns during alloy solidification: onset of the initial instability10.1073/pnas.95.2.431 ↗
12. Grain structures in aluminum alloy GTA welds10.1007/BF02653489 ↗
13. Welding parameters and the grain structure of weld metal—a thermodynamic consideration10.1007/BF02628392 ↗
14. EBSD study of solidification characteristics of austenitic stainless steel weld pool10.1179/174328409X405607 ↗
15. Phase formation during solidification of AISI 304 austenitic stainless steel10.1016/S1359-6462(01)01215-5 ↗
16. Correlation of high power laser welding parameters with real weld geometry and microstructure10.1016/j.optlastec.2017.03.004 ↗
17. Electron microscopy study of laser welded GH909 superalloy joint10.1016/j.jmrt.2020.10.049 ↗
18. Au–Fe alloy solidification and solid-state transformations10.1016/j.actamat.2009.10.017 ↗
19. Effect of laser power on defect, texture, and microstructure of a laser powder bed fusion processed 316L stainless steel10.1016/j.matdes.2018.12.006 ↗
20. Effect of longitudinal magnetic field on microstructure and fatigue performance of 316L multi-layer welds during narrow gap laser-MIG welding
21. Microsegregation in 70Cu-30Ni weld metal
22. Model of the absorption variation during pulsed laser heating applied to welding of electronic Au/Ni-coated Cu-leadframes10.1016/j.apsusc.2004.07.035 ↗
23. Solidification and Weldability of Nb-Bearing Superalloys
24. Planar-cellular-dendritic transformation in the fusion zone of a GH909 superalloy weldment10.1016/j.jmrt.2020.12.033 ↗
25. Nucleation mechanisms and grain refining of weld metal
26. Solidification, segregation and weld imperfections
27. Grain boundary diffusion mechanisms in metals10.1007/BF02650011 ↗
28. Effects of constitutional liquation in 18-Ni maraging steel weldments
29. The weld heat-affected zone of the 18Ni maraging steels
30. Grain refinement and orientation alternation of 10 mm 316L welds prepared by magnetic field assisted narrow gap laser-MIG hybrid welding10.1016/j.matchar.2020.110311 ↗
31. Theory of solidification of castings
32. Keyhole-induced porosity formation during laser welding10.1016/j.jmatprotec.2017.10.038 ↗
33. Comparison of Johnson–Mehl–Avrami–Kologoromov (JMAK) kinetics with a phase field simulation for polycrystalline solidification10.1016/j.actamat.2006.07.044 ↗
34. Dendrite growth directions and morphology in the directional solidification of anisotropic materials10.1007/s11837-007-0093-5 ↗
35. Fundamentals of solidification
36. Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder10.1016/j.actamat.2012.11.052 ↗
37. Kurz · 1992