journal article·2024-04

Effect of defocusing distance on interfacial reaction and mechanical properties of dissimilar laser Al/steel joints with a porous high entropy alloy coating

Jiawei Jiang, J.P. Oliveira, Jin Yang, Min Zheng, Haoyue Li, Wenhu Xu, Lingqing Wu, Tianyu Dou, Ruijun Wang, Caiwang Tan, Yongbing Li

Publisher page

Abstract

Aluminum alloy and low carbon steel were successfully laser weld-brazed when using a porous high entropy alloy (HEA) transient layer. It is shown that the joint wettability increased with the decreasing defocusing distance and the best wettability was obtained at 0 mm defocusing distance with the contact angle of 59.8° and wetting length of 5.57 mm. A fine and dense layer of τ 5 -(Fe,Co,Cr,Ni) 1.8Al 7.2Si phase was observed wrapping around the HEA spheres, and its thickness changed in a pronounced way with the defocusing distance, where a maximum thickness of 3.20 μm was obtained at 0 mm. A non-coherent interface and a composite-like structure was formed between the τ 5 phase and the HEA spheres. However, the τ 5 phase, consisting of a large number of nano-grains, aided in realizing the residual stresses at the joint interface through dislocation slip, leading to an enhanced interfacial bonding and joints failure near the fusion zone. An outstanding fracture load and displacement were achieved, with 333.9 N/mm and 4.07 mm respectively, at the optimized condition of 0 mm defocusing distance. And the mechanism of diffusion and metallurgical evolution was also revealed by thermodynamic calculations and diffusion kinetic analysis.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Laser techniques for dissimilar joining of aluminum alloys to steels: a critical review[J]
2. Influence of shielding gas onmicrostructure and mechanical properties of laser welded-brazed Al/steel lapped joint[J]
3. The influence of laser power on microstructure and properties of laser welding-brazing of Al alloys to Al-Si coated 22MnB5 steel[J]10.1016/j.optlastec.2023.109318 ↗
4. Effects of alloying copper and silicon on the bondability of dissimilar metal joints of aluminum alloys to steel[J]
5. Research progress in friction stir welding of steel and aluminum[J]10.1088/1755-1315/295/4/042085 ↗
6. Structure and properties of carbon steel-aluminum dissimilar joints[J]10.1179/174329305X19295 ↗
7. Effect of heat input on interfacial microstructure, tensile and bending properties of dissimilar Al/steel lap joints by laser weld-brazing[J]
8. Benedyk · 2010 · 79
9. Effect of welding parameters on the corrosion behavior of dissimilar alloy welds of T6 AA6061 Al-galvanized mild steel[J]10.1007/s11665-018-3596-z ↗
10. Effect of CoCrNi interlayer on the microstructure, mechanical, and corrosion properties of cold metal transfer Al/steel joints[J]
11. Effect of Si content on the interfacial reactions in laser welded-brazed Al/steel dissimilar butted joint[J]10.1016/j.jmatprotec.2018.03.010 ↗
12. Influence of alloy elements on microstructure and mechanical properties of Al/steel dissimilar joint by laser welding/brazing[J]10.1007/s40194-017-0540-z ↗
13. A short review on welding and joining of high entropy alloys[J]
14. Influence of porous high entropy alloy coating on wetting behavior and interfacial microstructure of Al-Si alloy on steel substrate[J]10.1016/j.jallcom.2022.165154 ↗
15. Development and characterization of CrCoNi medium entropy alloy particles reinforced aluminum matrix composite[J]
16. Outstanding ductility of dissimilar laser Al/steel spot joint using a high entropy alloy interlayer[J]
17. Recent progress in high-entropy alloys[J]
18. Effect of CoCrFeNiMn high entropy alloy interlayer on microstructure and mechanical properties of laser-welded NiTi/304 SS joint[J]10.1016/j.jmrt.2022.03.022 ↗
19. Dissimilar metal joining of 304 stainless steel to SMA490BW steel using the filler metal powders with a high-entropy design[J]10.1007/s12540-019-00400-5 ↗
20. Three-dimensional graphene-reinforced Cu foam interlayer for brazing C/C composites and Nb[J]10.1016/j.carbon.2017.03.099 ↗
21. Interfacial strength and microstructure of AlN/Cu joints produced by a novel brazing ethod facilitated by porous copper layer and Ag foil[J]10.1007/s10854-021-06135-7 ↗
22. Microstructural analysis of porous nickel brazed to copper and stainless steel using different brazing filler metals[J]10.21467/proceedings.141.20 ↗
23. Cohesion in alloys-fundamentals of a semi-empirical model[J]10.1016/0378-4363(80)90054-6 ↗
24. Modification and verification of Miedema model for predicating thermodynamic properties of binary precipitates in multi-element alloys[J]10.1016/j.physb.2021.413540 ↗
25. Predicting ternary activities using binary data
26. Relationship between partial enthalpy of mixing and partial excess entropy of solute elements in infinitely dilute solutions of liquid binary alloys[J]10.1515/ijmr-1990-810508 ↗
27. Laser brazing characteristics of Al to brass with Zn-based filler[J]10.1007/s11665-018-3401-z ↗
28. Laser beam welding of dissimilar stainless steels in a fillet joint configuration[J]10.1016/j.jmatprotec.2011.11.011 ↗
29. Influence of porous high entropy alloy coating on wetting behavior and interfacial microstructure of Al-Si alloy on steel substrate[J]10.1016/j.jallcom.2022.165154 ↗
30. Interfacial microstructure and strengthening mechanism of dissimilar laser Al/steel joint via a porous high entropy alloy coating[J]10.1016/j.jmrt.2023.02.040 ↗
31. The influence of laser power on microstructure and properties of laser welding-brazing of Al alloys to Al-Si coated 22MnB5 steel[J]10.1016/j.optlastec.2023.109318 ↗
32. Welding characteristics and mechanical property of rotating laser weld-brazing of aluminum alloy to steel[J]
33. Influence of wire feeding speed on laser brazing zinc-coated steel with Cu-based filler metal[J]
34. Brazing ZrB2-SiC ceramics to Nb with a novel CoFeNiCrCu high entropy alloy[J]10.1016/j.jeurceramsoc.2020.08.050 ↗
35. Improvement of laser welded TC4/CFRTP joint strength by combination of surface modification of MAO and laser texturing[J]
36. Microstructures and properties of high-entropy alloys[J]10.1016/j.pmatsci.2013.10.001 ↗
37. Heat input, intermetallic compounds and mechanical properties of Al/steel cold metal transfer joints[J]
38. Dynamic spreading and interfacial reactions during the laser-induced wetting process of aluminum on stainless steel[J]
39. Influence of Ni coating on interfacial reactions and mechanical properties in laser weld-brazing of Mg/Ti butt joint[J]10.1016/j.jallcom.2018.06.039 ↗
40. Interaction between the growth and dissolution of intermetallic compounds in the interfacial reaction between solid iron and liquid aluminum[J]10.1007/s11661-016-3667-4 ↗
41. Effects of Si contents in filling wires on microstructure evolution and properties of Al-steel dissimilar joint by laser weld-brazing[J]10.1016/j.jmrt.2021.09.053 ↗
42. Hetero-deformation induced strengthening and toughening of pure iron with inverse and multi-gradient structures[J]10.1016/j.msea.2020.139256 ↗