Laser powder bed fusion of Fex(CoCrMnNi)100-x medium-entropy ferrous alloys: Processability, microstructure and dynamic deformation mechanism
Source abstract
Abstract
In this work, Fe x(CoCrMnNi) 100-x (x = 40, 60 and 80 at.%) medium-entropy ferrous alloys (MEFAs) were fabricated through laser powder bed fusion (LPBF) of mixed powders composed of FeCoCrNiMn and Fe powders, and the dynamic compressive properties and deformation mechanisms were studied with combination of experiment and molecular dynamics simulation. The results demonstrate that all MEFAs exhibit good processability. The Fe40 and Fe60 samples were predominantly composed of FCC phase with coarse grains, while the Fe80 mainly consisted of BCC phase with a smaller grain size. When subjected to quasi-static and dynamic compression at 3000/s, the yield strengths of Fe40, Fe60 and Fe80 increases by 131, 220 and 256 MPa, respectively, illustrating the positive strain rate sensitivity and influence of Fe on the mechanical properties of MEFAs. Further, both the single-crystal and the polycrystalline models suggested that the incompatibility between the BCC and FCC phases is responsible for the enhancement of strength. Therefore, it is more likely to produce deformation twins, dislocations and thus stress concentration around the BCC phase, which is consistent with the TEM observations.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. High-entropy alloys10.1038/s41578-019-0121-4 ↗
2. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
3. Recent advances on high-entropy alloys for 3D printing10.1002/adma.201903855 ↗
4. Dynamic mechanical behavior and penetration performance of WFeNiMo high-entropy alloy
5. Analyzing the ‘non-equilibrium state’ of grain boundaries in additively manufactured high-entropy CoCrFeMnNi alloy using tracer diffusion measurements10.1016/j.jallcom.2020.155757 ↗
6. Additively manufactured hierarchical stainless steels with high strength and ductility10.1038/nmat5021 ↗
7. Additive manufacturing-a review
8. Machine learning customized novel material for energy-efficient 4D printing10.1002/advs.202206607 ↗
9. Review on field assisted metal additive manufacturing10.1016/j.ijmachtools.2023.104032 ↗
10. Comprehensive assessment of the printability of CoNiCrFeMn in laser powder bed fusion10.1016/j.matdes.2020.108845 ↗
11. Additively manufactured CoCrFeNiMn high-entropy alloy via pre-alloyed powder10.1016/j.matdes.2018.107576 ↗
12. Phase stability and microhardness of CoCrFeMnxNi2-x high entropy alloys10.1016/j.jallcom.2019.152025 ↗
13. Selective laser melting of in-situ CoCrFeMnNi high entropy alloy: effect of remelting10.1016/j.jmapro.2022.09.056 ↗
14. Fabricating CoCrFeMnNi high entropy alloy via selective laser melting in-situ alloying10.1016/j.jmst.2020.01.002 ↗
15. Comparative experimental study of the dynamic properties and adiabatic shear susceptibility of titanium alloys10.1016/j.euromechsol.2020.104137 ↗
16. Dynamic compressive properties and microstructural evolution of Al1.19Co2CrFeNi1.81 eutectic high entropy alloy at room and cryogenic temperatures10.1016/j.matdes.2022.110724 ↗
17. Dynamic compression deformation behavior of laser directed energy deposited α+β duplex titanium alloy with basket-weave morphology
18. Molecular dynamics simulations of shock loading of nearly fully dense granular Ni–Al composites10.1039/C9CP02920F ↗
19. Understanding the physical metallurgy of the CoCrFeMnNi high-entropy alloy: an atomistic simulation study10.1038/s41524-017-0060-9 ↗
20. Plasticity induced by shock waves in nonequilibrium molecular-dynamics simulations10.1126/science.280.5372.2085 ↗
21. Molecular dynamics simulation of the shock response of materials: a tutorial10.1063/5.0076266 ↗
22. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
23. 3D random Voronoi grain-based models for simulation of brittle rock damage and fabric-guided micro-fracturing10.1016/j.jrmge.2014.09.001 ↗
24. Visualization and analysis of atomistic simulation data with OVITO-the open visualization tool10.1088/0965-0393/18/1/015012 ↗
25. Structure identification methods for atomistic simulations of crystalline materials10.1088/0965-0393/20/4/045021 ↗
26. Automated identification and indexing of dislocations in crystal interfaces10.1088/0965-0393/20/8/085007 ↗
27. Laser powder bed fusion of Fe60(CoCrNiMn)40 medium-entropy alloy with excellent strength-ductility balance10.1016/j.matdes.2024.112720 ↗
28. Selective laser melting of iron: multiscale characterization of mechanical properties10.1016/j.msea.2020.140316 ↗
29. Experimental investigation and phase diagram of CoCrMnNi-Fe system bridging high-entropy alloys and high-alloyed steels10.1016/j.jallcom.2019.01.134 ↗
30. Novel TiB2-reinforced 316L stainless steel nanocomposites with excellent room- and high-temperature yield strength developed by additive manufacturing10.1016/j.compositesb.2018.07.050 ↗
31. Additive manufacturing of metallic components-process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
32. Epitaxy and microstructure evolution in metal additive manufacturing10.1146/annurev-matsci-070115-031728 ↗
33. Textures formed in a CoCrMo alloy by selective laser melting10.1016/j.jallcom.2015.01.096 ↗
34. On the stationary growth shapes of NH4Cl dendrites10.1016/0022-0248(76)90111-1 ↗
35. Selective laser melting of pure iron: multiscale characterization of hierarchical microstructure10.1016/j.matchar.2019.05.012 ↗
36. Dynamical behaviour and microstructural evolution of a nitrogen-alloyed austenitic stainless steel10.1016/j.msea.2007.07.014 ↗
37. Dislocation and twin substructure evolution during strain hardening of an Fe-22wt.%-Mn-0.6wt.%-C TWIP steel observed by electron channeling contrast imaging10.1016/j.actamat.2011.07.009 ↗
38. Strain rate effects of dynamic compressive deformation on mechanical properties and microstructure of CoCrFeMnNi high-entropy alloy10.1016/j.msea.2018.02.031 ↗
39. Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2016.07.038 ↗
40. Analysis of the tensile behavior of a TWIP steel based on the texture and microstructure evolutions10.1016/j.msea.2008.09.031 ↗
41. Calculation of the Taylor factor and lattice rotations for bcc metals deforming by pencil glide10.1007/BF02662666 ↗
42. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys10.1063/1.3587228 ↗
43. The fcc solid solution stability in the co-Cr-Fe-Mn-Ni multi-component system10.1016/j.actamat.2017.02.017 ↗
44. Feedforward control of thermal history in laser powder bed fusion: toward physics-based optimization of processing parameters10.1016/j.matdes.2022.111351 ↗
45. Understanding solid–solid (fcc→ω+bcc) transition at atomic scale10.1007/s40195-015-0283-z ↗
46. Anomalous diffusion phase transformations in steels upon severe cold deformation10.1134/S0031918X11020256 ↗
47. Molecular dynamics simulations of the mechanisms controlling the propagation of BCC/FCC semi-coherent interfaces in iron10.1088/0965-0393/24/5/055019 ↗
48. Adiabatic shear behaviors in rolled and annealed pure titanium subjected to dynamic impact loading10.1016/j.msea.2017.01.011 ↗
49. The evolution of local stress during deformation twinning in a mg-Gd-Y-Zn alloy10.1016/j.actamat.2021.117452 ↗
50. Microstructural effects on adiabatic shear band formation10.1016/j.scriptamat.2011.09.014 ↗
51. Cyclic plastic deformation response of Nanocrystalline BCC Iron10.1007/s12540-019-00475-0 ↗
52. Grain size effect on deformation twinning and detwinning10.1007/s10853-013-7140-0 ↗
53. Novel atomic-scale mechanism of incipient plasticity in a chemically complex CrCoNi medium-entropy alloy associated with inhomogeneity in local chemical environment10.1016/j.actamat.2020.05.042 ↗
54. Effect of crystallographic orientations on shock-induced plasticity for CoCrFeMnNi high-entropy alloy10.1016/j.ijmecsci.2022.107373 ↗
55. Corrosion behaviors of hot-extruded Mg96Y2Zn2 alloy in transverse and longitudinal directions: guidance for parameters selection10.1016/j.jallcom.2022.166405 ↗
56. Dislocation processes in the deformation of nanocrystalline aluminium by molecular-dynamics simulation10.1038/nmat700 ↗
57. Molecular dynamics-based analysis of the effect of voids and HCP-phase inclusion on deformation of single-crystal CoCrFeMnNi high-entropy alloy10.1016/j.msea.2020.139444 ↗
58. Bifunctional nanoprecipitates strengthen and ductilize a medium-entropy alloy10.1038/s41586-021-03607-y ↗
59. Effect of stacking faults on the ductility of Fe-18Mn-1.5Al-0.6C twinning-induced plasticity steel at low temperatures10.1016/j.scriptamat.2017.04.037 ↗
60. Repulsive force between screw dislocation and coherent twin boundary in aluminum and copper10.1103/PhysRevB.75.212104 ↗